Feasibility of recycling waste diatomite and fly ash cosintered as porous ceramics

Environmental Progress and Sustainable Energy

Volumn 32, Issue 1, 2013, Pages 25-34

  Lin, Kae Long ^a   Chang, Jen Chieh ^a  

^a NATIONAL ILAN UNIVERSITY   (Taiwan)

Author keywords

compressive strength; cosintering; recycling; toxicity characteristic leaching procedure; water absorption

Indexed keywords

ALTERNATIVE RAW MATERIAL; CO-SINTERING; COAL FLY ASH; CONSTANT PRESSURES; HEATING TEMPERATURES; MERCURY INTRUSION POROSIMETRY; OPERATING CONDITION; POROUS CERAMICS; RECYCLING WASTES; SINTERED SAMPLES; SINTERING PROCESS; SINTERING TEMPERATURES; SINTERING TIME; TOXICITY CHARACTERISTIC LEACHING PROCEDURES;

CERAMIC MATERIALS; COMPRESSIVE STRENGTH; LEACHING; MERCURY (METAL); RECYCLING; SCANNING ELECTRON MICROSCOPY; SINTERING; WATER ABSORPTION; X RAY DIFFRACTION;

FLY ASH;

EID: 84872684684     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.10592     Document Type: Article

References (38)

1. Martinovic, S., Vlahhovic, M., Boljanac, T., &, Pavlovic, L., (2006). Preparation of filter aids based on diatomites. International Journal of Mineral Processing, 80, 255-260.
2. 4 by the carbo-thermal reduction and nitridation of diatomite. Journal of the European Ceramic Society, 23, 2005-2014.
3. Stoermer, F., &, Smol, P.J., (1991). The diatoms: Applications for the environmental and earth sciences, Cambridge: Cambridge University Press.
4. Hadjar, H., Hamdi, B., Jaber, M., Brendlé, J., Kessaïssia, Z., Balard, H., &, Donnet, J.B., (2008). Elaboration and characterization of new mesoporous materials from diatomite and charcoal. Microporous and Mesoporous Materials, 107, 219-226.
5. Al-Qodah, Z., Lafi, W.K., Al-Anber, Z., Al-Shannag, M., &, Harahsheh, A., (2007). Adsorption of methylene blue by acid and heat treated diatomaceous silica. Desalination, 217, 212-214.
6. Al-Ghouti, M.A., Khraisheh, M.A.M., Ahmad, M.N., &, Allen, S.J., (2007). Microcolumn studies of dye adsorption onto manganese oxides modified diatomite. Journal of Hazardous Materials, 146, 316-327.
7. Osmanlioglu, A.E., (2007). Natural diatomite process for removal of radioactivity from liquid waste. International Journal of Applied Radiation and Isotopes, 65, 17-20.
8. Al-Degs, Y., Khraisheh, M.A.M., &, Tutunji, M.F., (2001). Sorption of lead ions on diatomite and manganese oxides modified diatomite. Water Research, 35, 3724-3728.
9. Vasconcelos, P.V., Labrincha, J.A., &, Ferreira, J.M.F., (2000). Permeability of diatomite layers processed by different colloidal techniques. Journal of the European Ceramic Society, 20, 201-207.
10. Berry, E.E., Hemmings, R.T., &, Cornelius, B.J., (1990). Mechanism of hydration reactions in high volume fly ash pastes and mortars. Cement and Concrete Composites, 12, 253-261.
11. Paya, J., Monzo, J., Borrachero, M.V., Peris-Mora, E., &, Gonzales-Lopez, E., (1996). Mechanical treatment of fly ashes. II. Particle morphologies in ground fly ash (GFA) and workability of GFA-Cement mortars. Cement and Concrete Research, 26, 225-235.
12. Anderson, M., (1984). A new low-cost PFA brick making process, International Conference on Ash Technology, London, pp. 569-573.
13. Wu, X., Wastiels, J., Faignet, S., &, Bauweraerts, P., (1994). A composite matrix material based on fly ash. In, A.M. Brandt, V.C. Li, &, I.H. Marshall, (Eds.), Proceedings on International Symposium on Brittle Matrix Composites 4 (pp. 437-446), Warsaw: IKE and Woodhead Publishing.
14. Mukherji, S.K., &, Machhoya, B.B., (1993). The utilisation on fly-ash in the preparation of ceramic tableware and artware. British Ceramic Transactions, 92, 6-12.
15. Sheng, J., Huang, B.X., Zhang, J., Zhang, H., Sheng, J., Yu, S., &, Zhang, M., (2003). Production of glass from coal fly ash. Fuel, 82, 181-185.
16. Leroy, C., Ferro, M.C., Monteiro, R.C.C., &, Fernandes, M.H.V., (2001). Production of glass-ceramics from coal fly ash. Fuel, 21, 195-202.
17. Barbieri, L., Lancellotti, I., Manfredini, T., Queralt, I., Rincon, M.J., &, Romero, M., (1999). Design, obtainment and properties of glasses and glassceramics from coal fly ash. Fuel, 78, 271-276.
18. Olgun, A., Erdogan, Y., Ayhan, Y., &, Zeybek, B., (2005). Development of ceramic tiles from coal fly ash and tincal ore waste. Ceramic International, 31, 153-158.
19. Sheng, J., (2001). Vitrification of borate waste from nuclear power plant using coal fly ash. I. Glass formulation development. Fuel, 80, 1365-1369.
20. Wakai, F., &, Aldinger, F., (2003). Equilibrium configuration of particles in sintering under constraint. Acta Materialia, 51, 641-652.
21. Wakai, F., Yoshida, M., Shinoda, Y., &, Akatsu, T., (2005). Coarsening and grain growth in sintering of two particles of different sizes. Acta Materialia, 53, 1361-1371.
22. Wakai, F., G'omez-Garcia, D., &, Rodriguez, A.D., (2007). Pore channel closure in sintering of a ring of three spheres. Journal of the European Ceramic Society, 27, 3365-3370.
23. Tikare, V., Braginsky, M., &, Olevsky, E.A., (2003). Numerical simulation of solidstate sintering. I. sintering of three particles. Journal of the American Ceramic Society, 86, 49-53.
24. Studart, A.R., Gnzenbach, U.T., Tervoort, E., &, Gauckler, L.J., (2006). Processing routes to macroporous ceramics: A review. Journal of the American Ceramic Society, 89, 1771-1789.
25. Galassi, C., (2006). Processing of porous ceramics: Piezoelectric materials. Journal of the European Ceramic Society, 26, 2951-2958.
26. Colombo, P., (2006). Conventional and novel processing methods for cellular ceramics. The Philosophical Transactions of the Royal Society A, 364, 109-124.
27. Vasiliev, P.O., Shen, Z.J., Hodgkins, R.P., &, Bergstrom, L., (2006). Meso/macroporous, mechanically stable silica monoliths of complex shapes by controlled fusion of mesoporous spherical particles. Chemistry of Materials, 18, 4933-4938.
28. Dibandjo, P., Bois, L., Estournes, C., Durand, B., &, Miele, P., (2008). Silica, carbon and boron nitride monoliths with hierarchical porosity prepared by spark plasma sintering process. Microporous and Mesoporous Materials, 111, 643-648.
29. Akhtar, F., Vasiliev, P.O., &, Bergstrom, L., (2009). Hierarchically porous ceramics from diatomite powders by pulsed current processing. Journal of the American Ceramic Society, 92, 338-343.
30. Ueno, S., Lin, L.M., &, Nakajima, H., (2008). Formation mechanism of porous alumina with oriented cylindrical pores fabricated by unidirectional solidification. Journal of the American Ceramic Society, 91, 223-226.
31. 4 molten-salt catalysts. Applied Catalysis B: Environmental, 42, 337-347.
32. Li, S.H., Wijn, J.R., Layrolle, P., &, Groot, K., (2003). Novel method to manufacture porous hydroxyapatite by dual-phase mixing. Journal of the American Ceramic Society, 86, 65-72.
33. Kim, H.W., Knowles, J.C., &, Kim, H.E., (2004). Mechanical and biological performance of calcium phosphate coatings on porous bone scaffold. Journal of the American Ceramic Society, 87, 2135-2138.
34. Yang, H.Y., Yang, S.F., Chi, X.P., Evans, J.R.G., Thompson, I., Cook, R.J., &, Robinson, P., (2008). Sintering behaviour of calcium phosphate filaments for use as hard tissue scaffolds. Journal of the European Ceramic Society, 28, 159-167.
35. Vasconcelos, P.V., Labrincha, J.A., &, Ferreira, J.M.F., (1998). Porosity development of diatomite layers processed by tape casting. Ceramic International, 24, 447-454.
36. Vasconcelos, P.V., Labrincha, J.A., &, Ferreira, J.M.F., (2000). Permeability of diatomite layers processed by different colloidal techniques. Journal of the European Ceramic Society, 20, 201-207.
37. Ho, H.C., Chow, J.D., &, Gau, S.H., (2008). Thermal mobility of heavy metals in municipal solid waste incinerator fly ash (MSWIFA). Environmental Engineering Science, 25, 649-656.
38. Ngun, B.K., Mohamad, H., Sulaiman, S.K., Okada, K., &, Ahmad, Z.A., (2011). Some ceramic properties of clays from central Cambodia. Applied Clay Science, 53, 33-41.