Processing of porous ceramics: Piezoelectric materials

Journal of the European Ceramic Society

Volumn 26, Issue 14, 2006, Pages 2951-2958

  Galassi, Carmen ^a  

^a INSTITUTE OF SCIENCE AND TECHNOLOGY FOR CERAMICS   (Italy)

Author keywords

Piezoelectric properties; Porosity; PZT; Sensors; Suspension

Indexed keywords

AEROGELS; CASTING; MICROSTRUCTURE; MORPHOLOGY; PORE SIZE; POROSITY; POROUS MATERIALS; SOL-GELS;

POROUS CERAMICS; POROUS ELECTROCERAMICS; SOL-GEL PROCESSING;

PIEZOELECTRIC MATERIALS;

AEROGELS; CASTING; MICROSTRUCTURE; MORPHOLOGY; PIEZOELECTRIC MATERIALS; PORE SIZE; POROSITY; POROUS MATERIALS; SOL-GELS;

EID: 33746505551     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2006.02.011     Document Type: Article

References (66)

1. Shepard L.M. Corrosion resistant ceramics for severe environments. Am. Ceram. Soc. Bull. 7 (1991) 1146-1158
2. Beltsios K.G., Steriotis T.A., Stefanopulos K.L., and Kanellopulos N.K. In: Schuth F., Sing K.S.W., and Weitkamp J. (Eds). Handbook of Porous Solids. Membrane Technology Vol 4 (2002), Wiley-VCH, Weinheim 2281-2433
3. Vercauteren S., Keizer K., Vansant E.F., Luyten J., and Leysen R. Porous ceramic membranes: preparation, transport properties and applications. J. Porous Mater. 5 (1998) 241-258
4. Frieβ W., and Warner J. In: Schuth F., Sing K.S.W., and Weitkamp J. (Eds). Handbook of Porous Solids Biomedical Applications Vol 5 (2002), Wiley-VCH, Weinheim 2923-2970
5. Suchnek W., and Yoshimura M. Processing and properties of hydroxyapatite-based materials for use as hard tissue replacement implants. J. Mater. Res. 13 (1998) 94-117
6. McLeary E.E., and Jansen J.C. Basic views on the preparation of porous ceramic membrane layers-A comparison between amorphous and crystalline layers, leading to a new method for the preparation of microporous continuous layers. Topics Catal. 1-2 (2004) 85-92
7. van de Water L.G.A., and Maschmeyer T. Mesoporous membranes-a brief overview of recent developments. Topics Catal. 1-2 (2004) 67-77
8. Hirschfeld D.A., Li T.K., and Liu D.M. Processing of porous oxide ceramics. Key Eng. Mater. 115 (1996) 65-80
9. Saggio-Woyansky J., Scott C.E., and Minnear W.P. Processing of porous ceramics. Am. Ceram Soc. Bull. 11 (1992) 1674-1682
10. Guicciardi S., Galassi C., Landi E., Tampieri A., Satou K., and Pezzotti G. Rheological characteristics of slurry controlling the microstructure and the compressive strength behavior of biomimetic hydroxyapatite. J. Mater. Res. 1 (2001) 163-170
11. Zhang G.-J., Yang J.-F., and Ohji T. Fabrication of porous ceramics with unidirectionally aligned continuous pores. J. Am. Ceram. Soc. 6 (2001) 1395-1397
12. Araki K., and Halloran J.W. Porous ceramic bodies with interconnected pore channels by a novel freeze casting technique. J. Am. Ceram. Soc. 5 (2005) 1108-1114
13. 4 ceramics with rod-shaped pore structure. J. Am. Ceram. Soc. 4 (2005) 1030-1032
14. Darcovich K., and Cloutier C.R. Processing of functionally gradient ceramic membrane substrates for enhanced porosity. J. Am. Ceram. Soc. 8 (1999) 2073-2152
15. Greil P. Biomorphous ceramics from lignocellulosics. J. Eur. Ceram. Soc. 2 (2001) 105-118
16. Sigmund W.M., Bell N.S., and Bergstrom L. Novel powder-processing methods for advanced ceramics. J. Am. Ceram. Soc. 7 (2000) 1557-1574
17. Sun H.T., Cantalini C., and Pelino M. Porosification effect on electroceramic properties. Key Eng. Mater. 115 (1996) 167-180
18. Rice R.W. The porosity dependence of physical properties of materials: a summary review. Key Eng. Mater. 115 (1996) 1-20
19. Young J.W. Optimization of acoustic receiver noise performance. J. Acoust. Soc. Am. 61 (1977) 1471
20. Newnhan R.E., Skinner D.P., and Cross L.E. Connectivity and piezoelectric-pyroelectric composites. Mater. Res. Bull. 13 (1978) 525-536
21. Marselli S., Pavia V., Galassi C., Roncari E., Craciun F., and Guidarelli G. Porous piezoelectric ceramic hydrophone. I. Acoust. Soc. Am. 2 (1999) 733-738
22. Deng Z.-Y., Yang J.-F., Beppu Y., Ando M., and Ohji T. Effect of agglomeration on mechanical properties of porous zirconia fabricated by partial sintering. J. Am. Ceram. Soc. 8 (2002) 1961-1965
23. Roncari E., Galassi C., Craciun F., Capiani C., and Piancastelli A. A microstructural study of porous piezoelectric ceramics obtained by different methods. J. Eur. Ceram. Soc. 21 (2001) 409-417
24. Rittenmyer K., Shrout T., Schulze W.A., and newnham R.E. Piezoelectric 3-3 composites. Ferroelectrics 41 (1982) 189-195
25. 3 by adding corn-starch. J. Phys. Chem. Solids 11 (2002) 2079-2084
26. Roncari E., Galassi C., Craciun F., Guidarelli G., Marselli S., and Pavia V. Ferroelectric ceramics with included porosity for hydrophone applications. In: Colla E., Damjanovic D., and Setter N. (Eds). Proceedings of the Eleventh IEEE International Symposium on Applications of ferroelectrics. IEEE catalog no. 98CH36245, The Institute of Electrical and Electronic Engineers, Ultrasonic, Ferroelectrics and frequency Control Society, Piscataway (1999) 373-376
27. Li J.-F., Takagi K., Ono M., Pan W., Watanabe R., Almajid A., et al. Fabrication and evaluation of porous piezoelectric ceramics and porosity-graded piezoelectric actuators. J. Am. Ceram. Soc. 7 (2003) 1094-1098
28. Shaw H.M., and Edirisinghe M.J. Porosity development during removal of organic vehicle from ceramic injection mouldings. J. Eur. Ceram. Soc. 13 (1994) 135-142
29. 3. J. Am. Ceram. Soc. 3 (2001) 485-491
30. Peng H.X., Fan Z.J., Evans R.G., and Busfield J.J.C. Microstructure of ceramic foams. J. Eur. Ceram. Soc. 7 (2000) 807-813
31. Ebaretonbofa E., and Evans J.R.G. High porosity hydroxyapatite scaffolds for bone substitute. J. Porous Mater. 9 (2002) 257-263
32. Li S.H., de Wijn J.R., Layrolle P., and de Groot K. Novel method to manufacture porous hydroxyapatite by dual-phase mixing. J. Am. Ceram. Soc. 1 (2003) 65-72
33. Lange F.F., and Miller K.T. Open cell low density ceramics fabricated from reticulated polymer substrates. Adv. Ceram. Mater. 4 (1987) 827-831
34. Roncari E., Galassi C., and Bassarello C. Mullite suspensions for reticulate ceramic preparation. J. Am. Ceram. Soc. 12 (2000) 2993-2998
35. Galassi C., Landi E., Tampieri A., and Celotti G. Rheological characterization of hydroxiapatite dispersions for sponge impregnation. In: Hirano S., Messing G.L., and Claussen N. (Eds). Ceramic Transactions, Ceramic Processing Science VI Vol 112 (2001), J. Am. Ceram. Soc. 215-220
36. Zhu X., Jiang D., Tan S., and Zhang Z. Improvement in the strut thickness of reticulated porous ceramics. J. Am. Ceram. Soc. 7 (2001) 1654-1656
37. Sheng H.Y., Bao L.J., Chen L.J., and Jun Y. Fabrication of bimodal porous alumina ceramics. Mater. Res. Bull. 2 (2003) 373-379
38. Park J.K., Lee J.S., and Lee S.I. Preparation of porous cordierite using gel casting method and its feasibility as a filter. J. Porous Mater. 9 (2002) 203-210
39. Lyckfeldt O., and Ferreira J.M. Processing of porous ceramics by "starch consolidation". J. Eur. Ceram. Soc. 18 (1998) 131-140
40. Olhero S.M., Tarì G., Coimbra M.A., et al. Synergy of polysaccharide mixtures in gel casting of alumina. J. Eur. Ceram. Soc. 4 (2000) 423-429
41. Rodriguez-Lorenzo L.M., Vallet-Regi M., and Ferreira J.M.F. Fabrication of porous hydroxyapatite bodies by a new direct consolidation method: starch consolidation. J. Biomed. Mater. Res. 2 (2002) 232-240
42. Galassi C., Roncari E., Capiani C., Fabbri G., Piancastelli A., Peselli M., et al. Processing of porous PZT materials for underwater acoustics. Ferroelectrics 268 (2002) 47-52
43. Ortega F.S., Valenzuela F.A.O., Scaracchio C.H., and Pandolfelli V.C. Alternative gelling agents for the gel casting of ceramic foams. J. Eur. Ceram. Soc. 23 (2003) 75-80
44. Studart A.R., Pandolfelli V.C., Tervoort E., and Gauckler L.J. Gelling of alumina suspensions using alginic acid salt and hydroxyaluminum diacetate. J. Am. Ceram. Soc. 11 (2000) 2711-2718
45. Fukasawa T., Ando M., Ohji T., and Kanzaki S. Synthesis of porous ceramics with complex pore structure by freeze-dry processing. J. Am. Ceram. Soc. 1 (2001) 230-232
46. 2, and hydroxyapatite ceramics with pores similar to a honeycomb structure. Adv. Eng. Mater. 7 (2002) 487-490
47. Nakahira A., Nishimura F., Kato S., Iwata M., and Takeda S. Green fabrication of porous ceramics using an aqueous electrophoretic deposition process. J. Am. Ceram. Soc. 7 (2003) 1230-1232
48. Prabhakaran K.R., Babu N., Kumar S.R., and Warrier K.G. Freeform gel casting of porous tubular alumina substrate. J. Am. Ceram. Soc. 12 (2002) 3126-3128
49. Corbin S.F., Lee J., and Qiao X. Influence of green formulation and pyrolyzable particulates on the porous microstructure and sintering characteristics of tape cast ceramics. J. Am. Ceram. Soc. 1 (2001) 41-47
50. Kim H., da Rosa C., Boaro M., Vohs J.M., and Gorte R.J. Fabrication of highly porous yttria-stabilized zirconia by acid leaching nickel from a nickel-yttria-stabilized zirconia cermet. J. Am. Ceram. Soc. 6 (2002) 1473-1476
51. Boaro M., Vohs J.M., and Gorte R.J. Synthesis of highly porous yttria-stabilized zirconia by tape-casting methods. J. Am. Ceram. Soc. 3 (2003) 395-400
52. Craciun F., Galassi C., Roncari E., Filippi A., and Guidarelli G. Electro-elastic properties of porous piezoelectric ceramics obtained by tape casting. Ferroelectrics 205 (1998) 49-67
53. Bose S., Sugira S., and Bandyopadhyay A. Processing of controlled porosity ceramic structures via fused deposition. Scripta Materialia 9 (1999) 1009-1014
54. Burggraaf A.J., and Keizer K. Synthesis of inorganic membranes. In: Bhave R.R. (Ed). Inorganic Membranes: Synthesis, Characteristics and Applications (1991), Van Nostrand Reinhold, New York
55. Klein, L.C., Woodman, R.H., Porous silica by the sol-gel process. Key Eng. Mater. Porous Ceramic Materials, Vol 115, ed. D.-M. Liu, 1996, pp. 109-124.
56. Lobmann P., Gaubitt W., Geis S., and Fricke J. Development of ferroelectric aerogels. J. Sol-Gel Sci. Technol. 16 (1999) 173-182
57. Sun B., Fan T., and hang D. Porous TiC ceramics derived from wood template. J. Porous Mater. 9 (2002) 275-277
58. Sun H.T., Cantalini C., and Pelino M. Porosification effect on electroceramic properties. Key Eng. Mater. 115 (1996) 167-180
59. Wanner A. Elastic modulus measurements of extremely porous ceramic materials by ultrasonic phase spectroscopy. Mater. Sci. Eng. A248 (1998) 35-43
60. Aduda B.O., and Boccaccini A.R. Velocity of elastic waves in porous ceramic materials: influence of pore structure. Br. Ceram. Trans. 3 (2003) 103-108
61. Jiang Q.J., and Cross L.E. Effects of porosity on electric fatigue behaviour in PLZT and PZT ferroelectric ceramics. J. Mater. Sci. 28 (1993) 4536-4543
62. 3 ceramics. J. Am. Ceram. Soc. 6 (2001) 1260-1264
63. Craciun F., Galassi C., and Roncari E. Experimental evidence for similar critical behaviour of elastic modulus and electrical conductivity in porous ceramic materials. Europhys. Lett. 1 (1998) 55-60
64. Galassi, C., Snijkers, F., Cooymans, J., Piazza, D., Capiani, C. and Luyten J., Influence of the pore size and morphology on the piezoelectric properties of PZT material. In Proceedings of the Conference PCM 2005 ISBN 90-5857-006-1 Legal Deposit no. D/2005/8642/1 Brugge, 20-21 October 2005.
65. Dunn M.L., and Taya M. Electrochemical properties of porous piezoelectric ceramics. J. Am. Ceram. Soc. 7 (1993) 1697-1706
66. Piazza D., Capiani C., and Galassi C. Piezoceramic material with anisotropic graded porosity. J. Eur. Ceram. Soc. 25 (2005) 3075-3078