Mixed numerical-experimental methods in wood micromechanics

Wood Science and Technology

Volumn 47, Issue 1, 2013, Pages 183-202

  Gamstedt, E Kristofer ^a   Bader, Thomas K ^b   De Borst, Karin ^c  

^a UPPSALA UNIVERSITY   (Sweden)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^c UNIVERSITY OF GLASGOW   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

DIMENSIONAL INSTABILITY; EXPERIMENTAL CHARACTERIZATION; EXPERIMENTAL TECHNIQUES; IRREGULAR MICROSTRUCTURE; MATERIAL PROPERTY; MECHANICAL TESTS; MIXED METHOD; MOISTURE TRANSPORT; PHYSICAL PHENOMENA; WOOD MECHANICS; WOOD-BASED MATERIALS;

CHARACTERIZATION; MICROMECHANICS; PARAMETER ESTIMATION; WOOD;

NUMERICAL METHODS;

MATHEMATICAL ANALYSIS; WOOD;

EID: 84872314173     PISSN: 00437719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00226-012-0519-2     Document Type: Review

References (81)

1. Absetz I (1999) Moisture transport and sorption in wood and plywood: theoretical and experimental analysis originating from wood cellular structure. Helsinki University of Technology, Dissertation
2. Almgren KM, Gamstedt EK, Varna J (2010) Contribution of wood fibres to the moisture-induced dimensional instability of composite plates. Polym Compos 31:762-771
3. Avril S, Bonnet M, Bretelle A-S, Grédiac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E, Pierron F (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48:381-402
4. Badel E, Perré P (2001) Using a digital X-ray imaging device to measure the swelling coefficients of a group of wood cells. NDT E Int 34:345-353 (Pubitemid 32487080)
5. Bergander A, Salmén L (2000a) The transverse elastic modulus of the native wood fibre wall. J Pulp Paper Sci 26:234-238
6. Bergander A, Salmén L (2000b) Variations in transverse fiber wall properties: relations between elastic properties and structure. Holzforschung 54:654-660 (Pubitemid 34044012)
7. Bonfield PW, Ansell MP (1991) Fatigue properties of wood in tension, compression and shear. J Mater Sci 26:4765-4773
8. Bonnet M, Constantinescu A (2005) Inverse problems in elasticity. IOP Inverse Problems 21:R1-R50 (Pubitemid 40540972)
9. Burgert I, Frühmann K, Keckes J, Fratzl P, Stanzl-Tschegg SE (2003) Microtensile testing of wood fibers combined with video extensometry for efficient strain detection. Holzforschung 57:661-664
10. Burgert I, Gierlinger N, Zimmermann T (2005) Properties of chemically and mechanically isolated fibers of spruce (Picea abies [L.] Karst.). Part 1: structural and chemical characterization. Holzforschung 59:240-246 (Pubitemid 40335856)
11. Cave ID (1969) Longitudinal Young's modulus of pinus radiata. Wood Sci Technol 3:40-48
12. Cousins WJ (1976) Elastic modulus of lignin as related to moisture content. Wood Sci Technol 10:9-17
13. Cousins WJ (1978) Young's modulus of hemicellulose as related to moisture content. Wood Sci Technol 12:161-167
14. Dvinskikh SV, Henriksson M, Berglund LA, Furo I (2011) A multinuclear magnetic resonance imaging (MRI) study of wood with adsorbed water: estimating bound water concentration and local wood density. Holzforschung 65:103-107
15. Eder M, Jungnikl K, Burgert I (2009) A close-up view of wood structure and properties across a growth ring of Norway spruce (Picea abies [L] Karst.). Trees-Struct Funct 23:79-84
16. Eder M, Arnould A, Dunlop WC, Hornatowska J, Salmén L (2012) Experimental micromechanical characterization of wood cell walls. Wood Sci Technol. doi: 10.1007/s00226-012-0515-6
17. Eitelberger J, Hofstetter K (2010a) Prediction of transport properties of wood below the fiber saturation point - a multiscale homogenization approach and its experimental validation. Part I: thermal conductivity. Compos Sci Technol 71:134-144
18. Eitelberger J, Hofstetter K (2010b) Prediction of transport properties of wood below the fiber saturation point - a multiscale homogenization approach and its experimental validation. Part II: steady state moisture diffusion coefficient. Compos Sci Technol 71:145-151
19. Eitelberger J, Hofstetter K (2011) A comprehensive model for transient moisture transport in wood below the fiber saturation point: physical background, implementation and experimental validation. Int J Therm Sci 50:1861-1866
20. Eitelberger J, Svensson S (2012) The sorption behaviour of wood studied by means of an improved cup method. Transp Porous Med 92:321-335
21. Eitelberger J, Hofstetter K, Dvinskikh SV (2011a) A multi-scale approach for simulation of transient moisture transport processes in wood below the fiber saturation point. Compos Sci Technol 15:1727-1738
22. Eitelberger J, Svensson S, Hofstetter K (2011b) Transport processes in wood below the fiber saturation point. Physical background on the microscale and its macroscopic description. Holzforschung 65:337-342
23. Engelund ET, Thygesen LG, Svensson S, Hill CAS (2012) A discussion on the physics of wood-water interactions. Wood Sci Technol. doi: 10.1007/s00226-012- 0514-7
24. Engl HW, Hanke M, Neubauer A (1996) Regularization of Inverse Problems. Kluwer, Dordrecht
25. Evans R (1999) A variance approach to the X-ray diffractiometric estimation of microfibril angle in wood. Appita J 52:283-294
26. Evans R (2006) Wood Stiffness by X-ray Diffractometry. In: Stokke DD, Groom LH (eds) Characterization of the Cellulosic Cell Wall. Blackwell Publishing, Ames
27. Eykhoff P (1974) System identification - parameter and system estimation. John Wiley & Sons, New York
28. Fratzl P, Weinkamer R (2007) Nature's hierarchical materials. Prog Mater Sci 52:1263-1334 (Pubitemid 47374755)
29. Gibson LJ, Easterling KE, Ashby MF (1981) The structure and mechanics of cork. Proc Roy Soc London A 377:99-117
30. Hameury S, Sterley M (2006) Magnetic resonance imaging of moisture distribution in Pinus sylvestris L. exposed to daily indoor relative humidity fluctuations. Wood Mater Sci Eng 1:116-126
31. Haygreen JG, Bowyer JL (1982) Forest products and wood science. The Iowa State University Press, AMES
32. Jäger A, Bader T, Hofstetter K, Eberhardsteiner J (2011a) The relation between indentation modulus, microfibril angle, and elastic properties of wood cell walls. Compos Part A 42:677-685
33. Jäger A, Hofstetter K, Buksnowitz C, Gindl-Altmutter W, Konnerth J (2011b) Identification of stiffness tensor components of wood cell walls by means of nanoindentation. Compos Part A 42:2101-2109
34. Janda T, Kuklik P, Senjoha M (2004) Mixed experimental and numerical approach to evaluation of material parameters of clayey soils. Int J Geomech 4:199-206 (Pubitemid 39174727)
35. Kajanto I, Niskanen K (1998) Dimensional Stability. Paper Physics. Fapet Oy, Helsinki, In
36. Keunecke D, Niemz P (2008) Axial stiffness and selected structural properties of yew and spruce microtensile specimens. Wood Res 53:1-14 (Pubitemid 351568036)
37. Keunecke D, Stanzl-Tschegg S, Niemz P (2007) Fracture characterisation of yew (Taxus baccata L.) and spruce (Picea abies [L.] Karst.) in the radial-tangential and tangential-radial crack propagation system by a micro wedge splitting test. Holzforschung 61:528-388
38. Keunecke D, Eder M, Burgert I, Niemz P (2008) Micromechanical properties of common yew (Taxus baccata) and Norway spruce (Picea abies) transition wood fibers subjected to longitudinal tension. J Wood Sci 54:420-422
39. Konnerth J, Buksnowitz C, Gindl W, Hofstetter K, Jäger A (2010) Full set of elastic constants of spruce wood cell walls determined by nanoindentation. In: Proceedings of the International Convention of the Society of Wood Science and Technology and United Nations Economic Commission for Europe - Timber Committee, Geneva
40. Koponen S, Toratti T, Kanerva P (1991) Modelling elastic and shrinkage properties of wood based on cell structure. Wood Sci Technol 25:25-32
41. Krabbenhoft K, Damkilde L (2004) A model for non-Fickian moisture transfer in wood. Mater Struct 37:615-622
42. Lekhnitskii S (1950) Theory of elasticity of an anisotropic body (in Russian). Gostekhizdat, Moscow
43. MacMillan MB, Schneider MH, Sharp AR, Balcom BJ (2002) Magnetic resonance imaging of water concentration in low moisture content wood. Wood Fiber Sci 34:276-286 (Pubitemid 34460069)
44. Marklund E, Varna J (2009) Modeling the hygroexpansion of aligned wood fiber composites. Compos Sci Technol 69:1108-1114
45. Morais J, Xavier J, Pereira J, Pinto L (2011) Book of abstracts of the COST Action FP0802 Thematic workshop: Mixed numerical and experimental methods applied to the mechanical characterization of bio-based materials, University of Trás-os-Montes e Alto Douro, Vila Real, April 27-28. Vila Real, Portugal
46. Mott L, Groom L, Shaler S (2002) Mechanical properties of individual Southern Pine fibers. Part II. Comparison of earlywood and latewood fibers with respect to tree height and juvenility. Wood Fib Sci 34(2):221-237 (Pubitemid 34460065)
47. Neagu RC, Gamstedt EK, Lindström M (2005) Influence of wood-fibre hygroexpansion on the dimensional instability of fibre mats and composites. Compos Part A 36:772-788 (Pubitemid 40391016)
48. Neagu RC, Gamstedt EK, Bardage SL, Lindström M (2006) Ultrastructural features affecting mechanical properties of wood fibres. Wood Mater Sci Eng 1:146-170
49. Nguyen TQ, Petkovic J, Dangla P, Baroghel-Bouny V (2008) Modelling of coupled ion and moisture transport in porous building materials. Construct Build Mater 22:2185-2195
50. Olek W, Perré P, Weres J (2005) Inverse analysis of the transient bound water diffusion in wood. Holzforschung 59(1):38-45 (Pubitemid 40274089)
51. Olek W, Perré P, Weres J (2011) Implementation of a relaxation equilibrium term in the convective boundary condition for a better representation of the transient bound water diffusion in wood. Wood Sci Technol 45(4):677-691
52. Oliver WC, Pharr GM (1992) Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564-1580 (Pubitemid 23627669)
53. Orso S, Wegst UGK, Arzt E (2006) The elastic modulus of spruce wood cell wall material measured by an in situ bending technique. J Mater Sci 41:5122-5126 (Pubitemid 44326808)
54. Östlund S, Nilsson F (1993) Cohesive modelling of damage at the tip of cracks in slender beam structures. Fatigue Fract Eng Mater Struct 16:663-676
55. Pel L, Brocken H, Kopinga K (1996) Determination of moisture diffusivity in porous media using moisture concentration profiles. Int J Heat Mass Transfer 39:1273-1280 (Pubitemid 126399675)
56. Peralta PN, Skaar C (1993) Experiments on steady-state non-isothermal moisture movement in wood. Wood Fib Sci 25:124-135
57. Perré P (2007) Multiscale aspects of heat and mass transfer during drying. Transp Porous Media 66:59-76
58. Pharr GM, Oliver WC, Brotzen FR (1992) On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. J Mater Res 7:613-617
59. Porion P, Delville A (2009) Multinuclear NMR study of the structure and micro-dynamics of counterions and water molecules within clay colloids. Curr Opin Colloid Interface Sci 14:216-222
60. Quick JJ, Hailey JRT, Mackay AL (1990) Radial moisture profiles of cedar sapwood during drying - a proton magnetic-resonance study. Wood Fiber Sci 22:404-412
61. Reiterer A, Lichtenegger H, Tschegg S, Fratzl P (1999) Experimental evidence for a mechanical function of the cellulose microfibril angle in wood cell walls. Philo Mag A - Phys Condens Matter Struct Defects Mech Prop 79:2173-2184 (Pubitemid 129488684)
62. Rikards R (2003) Identification of mechanical properties of laminates. In: Altenbach H, Becker W (eds) Modern trends in composite laminates mechanics. Springer, Wien, pp 181-225
63. Schirmer R (1938) Die Diffusionszahl von Wasserdampf-Luft-Gemischen und die Verdampfungsgeschwindigkeit, Ph.D. thesis, Technische Hochschule München
64. Schreier HW, Garcia D, Sutton MA (2004) Advances in light microscope stereo vision. Exp Mech 44:278-287
65. Shipsha A, Berglund LA (2007) Shear coupling effects on stress and strain distributions in wood subjected to transverse compression. Compos Sci Technol 67:1362-1369 (Pubitemid 46381379)
66. Siau JF (1984) Transport processes in wood. Verlag Springer, Berlin
67. Sol H, Oomens CWJ (1997) Material identification using mixed numerical experimental methods. Kluwer, Dordrecht
68. Sørensen BF, Jacobsen TK (1998) Large-scale bridging in composites: R-curves and bridging laws Compos Part A 29:1443-1451
69. Sørensen BF, Jacobsen TK (2003) Determination of cohesive laws by the J integral approach. Eng Fract Mech 70:1841-1858 (Pubitemid 36832691)
70. Sørensen BF, Gamstedt EK, Østergaard RC, Goutianos S (2008) Micromechanical model of cross-over fiber bridging - Prediction of mixed mode bridging law. Mech Mater 40:220-234 (Pubitemid 350296375)
71. Spearing SM, Evans AG (1992) The role of fiber bridging in the delamination resistance of fiber-reinforced composites. Acta Metal Mater 40:2191-2199
72. Sutton MA, Ke X, Lessner SM, Goldbach M, Yost M, Zhao F, Schreier HW (2008) Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation. J Biomed Mater Res 84A:178-190 (Pubitemid 350244259)
73. Swadener JG, Pharr GM (2001) Indentation of elastically anisotropic half-spaces by cones and parabolae of revolution. Phil Mag A 81:447-466
74. Tarantola A (2005) Inverse problem theory and methods for model parameter estimation. SIAM, Philadelphia
75. Tremblay C, Cloutier A, Fortin Y (1996) Moisture content-water potential relationship of red pine sapwood above the fiber saturation point and determination of the effective pore size distribution. Wood Sci Technol 30:361-371 (Pubitemid 126520814)
76. Vantomme, J, De Visscher J, Sol H, De Wilde WP (1995) Determination and parametric study of material damping in fibre reinforced plastics: a review. Eur J Mech Eng 40: No 4
77. Vlassak JJ, Ciavarella M, Barber JR, Wang X (2003) The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape. J Mech Phys Solids 51:1701-1721
78. Wallström L, Lindberg KAH, Johansson J (1995) Wood surface stabilization. Holz Roh Werkst 53:87-92
79. Wang G, Yu Y, Shi SQ, Wang JW, Cao SP, Cheng HT (2011) Microtension test method for measuring tensile properties of individual cellulosic fibers. Wood Fib Sci 43(3):251-261
80. Waszczyszyn Z, Burczynński T, Mróz Z (2009) Special issue: papers from the international symposium on inverse problems in mechanics of structures and materials - IPM 2009. Inv Prob Sci Eng 19:1-153
81. Yoshihara H, Tsunematsu S (2007) Bending and shear properties of compressed Sitka spruce. Wood Sci Technol 45:117-131