Multiphase CFD-CHT optimization of the cooling jacket and FEM analysis of the engine head of a V6 diesel engine

Applied Thermal Engineering

Volumn 52, Issue 2, 2013, Pages 293-303

  Fontanesi, Stefano ^a   Giacopini, Matteo ^a  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

Author keywords

Boiling; Engine head; Fatigue analysis; Heat transfer

Indexed keywords

CONJUGATE HEAT TRANSFER; COOLING JACKETS; DESIGN OPTIMIZATION; DETAILED MODELS; EFFECTIVE TOOL; ENGINE FAILURES; ENGINE HEADS; FATIGUE ANALYSIS; FATIGUE STRENGTH; FEM ANALYSIS; HIGH-CYCLE FATIGUES; LOW CYCLE FATIGUES; MECHANICAL LOADING; METAL COMPONENTS; MULTIAXIAL STRESS; NUCLEI FORMATION; NUMERICAL METHODOLOGIES; OPERATING CONDITION; THERMAL BEHAVIORS; THERMO-MECHANICAL ANALYSIS; THERMO-MECHANICAL BEHAVIORS; THERMO-MECHANICAL CHARACTERIZATION; THERMO-MECHANICAL LOADING; TURBOCHARGED DIESEL ENGINE; WATER COOLING;

BOILING LIQUIDS; COOLANTS; DIESEL ENGINES; FINITE ELEMENT METHOD; HEAT TRANSFER; OPTIMIZATION; VAPORS;

ENGINES;

EID: 84872307684     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2012.12.005     Document Type: Article

References (27)

1. K. Dang Van, G. Cailletaud, J.F. Flavenot, A. Le Douaron, and H.P. Lieurade Criterion for high-cycle fatigue failure under multiaxial loading M.W. Brown, K.J. Miller, Biaxial and Multiaxial Fatigue 1989 Mechanical Engineering Publications London 459 478
2. M.W. Brown, and K.J. Miller A theory for fatigue failure under multiaxial stress-strain conditions Proc. Inst. Mech. Eng. 187 1973 745 755
3. R.P. Skelton Energy criteria for high temperature low cycle fatigue Mater. Sci. Technol. 7 1991 427 439 (Pubitemid 21668181)
4. E. Charkaluk, A. Bignonnet, A. Constantinescu, and K. Dang Van Fatigue design of structures under thermomechanical loadings Fatig. Fract. Eng. Mater. Struct. 25 12 2002 1199 1206
5. J.J. Thomas, L. Verger, A. Bignonnet, and E. Charkaluk Thermomechanical design in the automotive industry Fatig. Fract. Eng. Mater. Struct. 27 2004 887 895
6. W.M. Zhao, and W. Zhang Study on thermal fatigue life prediction of cylinder head Adv. Mater. Res. 3 2012 433 440
7. G. Cantore, M. Giacopini, R. Rosi, A. Strozzi, P. Pelloni, C. Forte, M. Achiluzzi, G.M. Bianchi, L. Ceschini, and A. Morri Validation of a combined CFD/FEM methodology for the evaluation of thermal load acting on aluminum alloy pistons through hardness measurements in internal combustion engines Metall. Sci. Technol. 29 1 2011 16 25
8. D. Carpentiero, S. Fontanesi, V. Gagliardi, S. Malaguti, S. Margini, M. Giacopini, A. Strozzi, L. Arnone, M. Bonanni, and D. Franceschini Thermo-mechanical Analysis of an Engine Head by Means of Integrated CFD and FEM, SAE Paper 2007-24-0067 2007 Society of Automotive Engineers Warrendale, PA
9. S. Fontanesi, D. Carpentiero, S. Malaguti, M. Giacopini, S. Margini, and L. Arnone A New Decoupled CFD and FEM Methodology for the Fatigue Strength Assessment of an Engine Head, SAE Paper 2008-01-0972 2008 Society of Automotive Engineers Warrendale, PA
10. S. Nukiyama Maximum and minimum values of heat transmitted from metal to boiling water under atmospheric pressure Jpn. Soc. Mech. Eng. 37 1934 367 374
11. M. Gollin, E.V. McAssey, and C. Stinson Comparative Performance of Ethylene Glycol/Water and Propylene Glycol/Water Coolants in the Convective and Forced Flow Boiling Regimes, SAE Paper 950464 1995 Society of Automotive Engineers Warrendale, PA
12. H.S. Lee, and A.T. O'Neill Comparison of Boiling Curves Between a Standard S.I. Engine and a Flow Loop for a Mixture of Ethylene Glycol and Water, SAE Paper 2006-01-1231 2006 Society of Automotive Engineers Warrendale, PA
13. S. Fontanesi, and E.V. McAssey Experimental and Numerical Investigation of Conjugate Heat Transfer in a HSDI Diesel Engine Water Cooling Jacket, SAE Paper 2009-01-0703 2009 Society of Automotive Engineers Warrendale, PA
14. F.R. Menter Zonal two equation k-ω turbulence models for aerodynamic flows AIAA Paper 93-2906 1993
15. C.D. Rakopoulos, D.C. Rakopoulos, G.C. Mavropoulos, and E.G. Giakoumis Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a diesel engine at various operating conditions Appl. Therm. Eng. 24 2004 679 702
16. C.D. Rakopoulos, and D.T. Hountalas Development of a new 3-D multi-zone combustion model for indirect injection diesel engines with a swirl type prechamber Trans. SAE J. Engines 109 2000 718 733
17. S. Fontanesi, G. Cicalese, A. D'Adamo, and G. Pivetti Validation of a CFD Methodology for the Analysis of Conjugate Heat Transfer in a High Performance SI Engine, SAE Paper 2011-24-0132 2011 Society of Automotive Engineers Warrendale, PA
18. C.D. Rakopoulos, and G.C. Mavropoulos Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled diesel engine Energ. Convers. Manag. 41 2000 1265 1281 (Pubitemid 30592228)
19. E. Carvajal Trujillo, F.J. Jiménez-Espadafor, J.A. Becerra Villanueva, and M. Torres García Methodology for the estimation of cylinder inner surface temperature in an air-cooled engine Appl. Therm. Eng. 31 2011 1474 1481
20. V. Esfahanian, A. Javaheri, and M. Ghaffarpour Thermal analysis of an SI engine piston using different combustion boundary condition treatments Appl. Therm. Eng. 26 2006 277 287 (Pubitemid 41500138)
21. C. Borgnakke, V.S. Arpaci, and R.J. Tabaczynski A Model for the Instantaneous Heat Transfer and Turbulence in a Spark Ignition Engine, SAE Paper 800287 1980 Society of Automotive Engineers Warrendale, PA
22. Gopinath R. Warrier, and Vijay K. Dhir Heat transfer and wall heat flux partitioning during subcooled flow nucleate boiling-a review Trans. ASME J. Heat Trans. 128 2006 1243 1256 (Pubitemid 46165175)
23. W.M. Rohsenow A method of correlation heat transfer data for surface boiling of liquid Trans. ASME J. Heat Trans. 74 1952 969 976
24. I.C. Finlay, G.R. Gallacher, T.W. Biddulph, and R.A. Marshall The Application of Precision Cooling to the Cylinder-head of a Small Automotive Petrol Engine, SAE Paper 880263 1988 Society of Automotive Engineers Warrendale, PA
25. T. Takahashi, and K. Sasaki Low cycle thermal fatigue of aluminum alloy cylinder head in consideration of changing metrology microstructure Procedia Eng. 2 2010 767 776
26. J.L. Chaboche Time-independent constitutive theories for cyclic plasticity Int. J. Plasticity 2 1986 149 188 (Pubitemid 16566126)
27. J.L. Chaboche Constitutive equations for cyclic plasticity and cyclic viscoplasticity Int. J. Plasticity 5 1989 247 302