Aseptic processing of liquid and particulate foods

Food Processing Operations Modeling: Design and Analysis, Second Edition

Volumn , Issue , 2008, Pages 13-52

  Sandeep, K P ^a   Puri, Virendra M ^b  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

^b University Park   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEAERATION; DEGASSING; STERILIZATION (CLEANING);

ASEPTIC PROCESSING; BACK PRESSURE VALVE; HIGH-QUALITY PRODUCTS; INDIRECT CONTACT; PACKAGING SYSTEM; PARTICULATE FOODS; PROCESS CALCULATION; PROCESSING TEMPERATURE;

THERMAL PROCESSING (FOODS);

EID: 84872077622     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (47)

1. David, J.R.D., Graves, R.H., and Carlson, V.R. 1996. Aseptic processing and packaging of food: A food industry perspective. Boca Raton, FL: CRC Press, 21-29.
2. Dean, W.R. 1927. Motion of fluid in a curved pipe. Philosophical Magazine Series 74(20): 208-23.
3. Dean, W.R. 1928. The stream-line motion of fluid in a curved pipe. Philosophical Magazine Series 7 5: 673-95.
4. Truesdell, L.C., and Adler, R.J. 1970. Numerical treatment of fully developed laminar flow in helically coiled tubes. AIChE Journal 16: 1010-14.
5. Taylor, G.I., and Yarrow, F.R.S. 1929. The criterion for turbulence in curved pipes. Proceedings of the Royal Society of London A124: 243-49.
6. Koutsky, J.A., and Adler, R.J. 1964. Minimization of axial dispersion by use of secondary flow in helical tubes. The Canadian Journal of Chemical Engineering 42: 239-46.
7. White, C.M. 1929. Streamline flow through curved pipes. Proceedings of the Royal Society A123: 645-63.
8. Srinivasan, P.S., Nandapurkar, S.S., and Holland F.A. 1968. Pressure drop heat transfer in coils. The Chemical Engineer May 46: 113-19.
9. Berger, S.A., Talbot, L., and Yao, L.S. 1983. Flow in curved pipes. Annual Review of Fluid Mechanics 15: 461-512.
10. Moody, L.F. 1944. Friction factors for pipe flow. ASME Transactions 66: 671-84.
11. Colebrook, C.F. 1939. Friction factors for pipe flow. Institute of Civil Engineering 11: 133-156.
12. Manlapaz, R.L., and Churchill, S.W. 1980. Fully developed laminar flow in a helically coiled tube of finite pitch. Chemical Engineering Communications 7: 57-78.
13. Dutta, B., and Sastry, S.K. 1990. Velocity distributions of food particle suspensions in holding tube flow: Experimental and modeling studies on average particle velocities. Journal of Food Science 55(5): 1448-53.
14. Palmieri, L., Cacace, D., Dipollina, G., and Dall’Aglio, G. 1992. Residence time distribution of food suspensions containing large particles when flowing in tubular systems. Journal of Food Engineering 17: 225-39.
15. Sancho, M.F., and Rao, M.A. 1992. Residence time distribution in a holding tube. Journal of Food Engineering 15: 1-19.
16. Sandeep, K.P., and Zuritz, C.A. 1995. Residence times of multiple particles in non-Newtonian holding tube flow: Effect of process parameters and development of dimensionless correlations. Journal of Food Engineering 25: 31-44.
17. Baptista, P.N., Oliveira, F.A.R., Caldas, S.M., and Oliveira, J.C. 1996. Effect of product and process variables in the flow of spherical particles in a carrier fluid through straight tubes. Journal of Food Processing and Preservation 20: 467-86.
18. Chen, W., and Jan, R. 1993. The torsion effect on fully developed laminar flow in helical square ducts. Journal of Fluids Engineering 115: 292-301.
19. Tucker, G.S., and Withers, P.M. 1994. Determination of residence time distribution of nonsettling food particles in viscous food carrier fluids using hall effect sensors. Journal of Food Process Engineering 17: 401-22.
20. Ahmad, M., Singh, S.N., and Seshadri, V. 1993. Distribution of solid particles in multisized particulate slurry flow through a 90pipe bend in horizontal plane. Bulk Solids Handling 13(2): 379-85.
21. Sandeep, K.P., Zuritz, C.A., and Puri, V.M. 1997. Residence time distribution of particles during two-phase non-Newtonian flow in conventional as compared with helical holding tubes. Journal of Food Science 62(4): 647-52.
22. Bird, R.B., Stewart, W.E., and Lightfoot, E.N. 1960. Transport phenomena. New York, NY: John Wiley and Sons. 91-103.
23. Fichtali, J., van de Voort, F.R., and Doyon, G.J. 1993. A rheological model for sodium caseinate. Journal of Food Engineering 19(2): 203-11.
24. Ibarz, A., Pagan, J., and Miguelsanz, R. 1992. Rheology of clarified fruit juices. II:Blackcurrant juices. Journal of Food Engineering 15: 63-73.
25. Xuewu, Z., Xin, L., Dexiang, G., Wei, Z., Tong, X., and Yonghong, M. 1996. Rheological models for Xanthum gum. Journal of Food Engineering 27: 203-9.
26. Sastry, S.K., and Zuritz, C.A. 1987. A model for particle suspension flow in a tube. ASAE Paper No. 876537.
27. Oliver, D.R. 1962. Influence of particle rotation on radial migration in the Poiseuille flow of suspension. Nature 194: 1269-1291.
28. Theodore, L. 1964. Sidewise force exerted on a spherical particle in a Poiseuille flow. Engineering Science, Doctoral Thesis. New York University.
29. Saffman, P.G. 1965. The lift on a small sphere in a slow shear flow. Journal of Fluid Mechanics 22(2): 385-400.
30. Clift, R., and Gauvin, W.H. 1971. Motion of entrained particles in gas streams. The Canadian Journal of Chemical Engineering 49: 439-48.
31. Maesmans, G., Hendrickx, N., DeCordt, S., Francis, A., and Tobback, P. 1992. Fluidto- particle heat transfer coefficient determination of heterogeneous foods: A review. Journal of Food Processing and Preservation. 16: 29-69.
32. Christiansen, E.B., and Craig, Jr., S.E. 1962. Heat transfer to pseudoplastic fluids in laminar flow. AIChE Journal 8(2): 154-60.
33. McCabe, W.L., Smith, J.C., and Harriott, P. 1985. Unit operations in chemical engineering. 4th edn. Singapore: McGraw-Hill. 294-354.
34. Beek, N.J., and Eggink, R. 1962. In Developments of Heat Transfer. Cambridge, MA:The M.I.T. Press. Edited by W. M. Rohsenow. p. 334.
35. Zuritz, C.A., McCoy, S.C., and Sastry, S.K. 1990. Convective heat transfer coefficients for irregular particles immersed in non-Newtonian fluid during tube flow. Journal of Food Engineering 11: 159-74.
36. Filkova, I., Koziskova, B., Filka, P. 1986. Heat transfer to a power law fluid in tube flow: An experimental study. In Food Engineering and Process Applications. 1: Transport Phenomena. Elsevier Applied Sciences Publishers. London, England: Edited by Maguer, M.L., Jelen, pp. 259-72.
37. Wilkinson, W.L. 1960. Non-Newtonian fluids. London: Pergamon. p. 104.
38. Perry, R.H., and Chilton, C.H. 1973. Chemical engineer’s handbook. Singapore:McGraw-Hill Book Company.
39. Zitoun, K.B., and Sastry, S.K. 1994. Determination of convective heat transfer coefficient between fluid and cubic particles in continuous tube flow using noninvasive experimental techniques. Journal of Food Process Engineering 17: 209-28.
40. Weisser, H. 1972. Untersuchungen zum Warmeubergang im Kratzkuhler. PhD thesis. Germany: Karlsruhe Universitat.
41. Skelland, A.H.P., Oliver, D.R., and Tooke, S. 1962. Heat transfer in a water-cooled scraped-surface heat exchanger. British Chemical Engineering 7(5): 346-353.
42. Kalb, C.E., and Seader, J.D. 1972. Heat and mass transfer phenomena for viscous flow in curved circular tubes. International Journal of Heat and Mass Transfer 15: 801-17.
43. Kalb, C.E., and Seader, J.D. 1974. Fully developed viscous-flow heat transfer in curved circular tubes with uniform wall temperature. AICHE Journal 20(2): 340-46.
44. Janssen, L.A.M., and Hoogendoorn, C.J. 1978. Laminar convective heat transfer in helical coiled tubes. International Journal of Heat and Mass Transfer 21: 1197-206.
45. Willhoft, E.M.A. 1993. Aseptic processing and packaging of particulate foods. London: Blackie Academic and Professional: 6-7.
46. Simpson, S.G., and Williams, M.C. 1974. An analysis of high temperature short time sterilization during laminar flow. Journal of Food Science 39: 1047-54.
47. CAPPS&NCFST. 1996. Case study for condensed cream of potato soup. Aseptic Processing of Multiphase Foods Workshop. Nov. 14-15, 1995; Mar. 12-13, 1996.