Effect of the drilling process on the compression behavior of glass/epoxy laminates

Composite Structures

Volumn 98, Issue , 2013, Pages 59-68

  Zarif Karimi, Navid ^a   Heidary, Hossein ^a   Minak, Giangiacomo ^b   Ahmadi, Mehdi ^a  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

A. Polymer matrix composites (PMCs); B. Mechanical properties; D. Acoustic emission; E. Machining

Indexed keywords

ACOUSTIC EMISSION TECHNIQUES; AE ENERGY; COMPRESSION BEHAVIOR; COMPRESSION FORCE; COMPRESSION TESTS; DELAMINATION FACTOR; DESIGN OF THE EXPERIMENT; DRILLING PARAMETERS; DRILLING PROCESS; FEED-RATES; GLASS/EPOXY; MACHINING OPERATIONS; MECHANICAL CHARACTERISTICS; POLYMERMATRIX COMPOSITES (PMCS); RESIDUAL STRENGTH; ROOT MEAN SQUARE; THRUST FORCES;

ACOUSTIC EMISSIONS; COMPOSITE MATERIALS; COMPRESSION TESTING; DELAMINATION; LAMINATES; MECHANICAL PROPERTIES; POLYMER MATRIX COMPOSITES; TAGUCHI METHODS;

COMPRESSIVE STRENGTH;

EID: 84872050604     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2012.10.044     Document Type: Article

References (39)

1. Chen W.C. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Int J Mach Tools Manuf 1997, 37:1097-1108.
2. Davim J.P., Campos Rubio J., Abrao A.M. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 2007, 67:1939-1945.
3. Lachaud F., Piquet R., Collombet F., Surcin L. Drilling of composite structures. Compos Struct 2001, 52:511-516.
4. Tsao C.C., Hocheng H., Chen Y.C. Delamination reduction in drilling composite materials by active backup force. Composites: Part A 2012, 61:91-94.
5. Zitoune R., Collombet F. Numerical prediction of the thrust force responsible of delamination during the drilling of long-fiber. Composites: Part A 2007, 38:858-866.
6. Durão L.M.P., de Moura M.F.S.F., Marques A.T. Numerical prediction of delamination onset in carbon epoxy. Eng Fract Mech 2008, 75:2767-2778.
7. Govekar E., Gradišek J., Grabec I. Analysis of acoustic emission signals and monitoring of machining processes. Ultrasonics 2000, 38:598-603.
8. Rubio E.M., Tetiand R., Baciu I.L. Advanced signal processing in acoustic emission monitoring systems for machining technology. Intell Prod Mach Syst 2006, 1-6.
9. Goldsmith W., Dharan C.H.K., Chang H. Quasi-static and ballistic perforation of carbon fiber laminates. Int J Solids Struct 1995, 32:89-103.
10. Hocheng H., Dharan C.K.H. Delamination during drilling in composite laminates. Trans ASME, J Eng Ind 1990, 112:236-239.
11. Hocheng H., Tsao C.C. Effects of special drill bits on drilling-induced delamination of composite materials. Int J Mach Tools Manuf 2006, 46:1403-1416.
12. Hocheng H., Tsao C.C. Comprehensive analysis of delamination in drilling of composite materials. J Mater Process Technol 2003, 140:335-339.
13. Hocheng H., Tsao C.C. The path towards delamination-free drilling of composite materials. J Mater Process Technol 2005, 167:251-264.
14. Lee SWR, Sun CT. Modeling penetration process of composite laminates subjected to a blunt-ended punch. In: 23rd International technical conference of society for the advancement of material and process engineering (SAMPE), Kiamesha Lake, NY, 21-24 October 1991. p. 624-38.
15. Zhu G., Goldsmith W., Dharan C.K.H. Penetration of laminated Kevlar by projectiles: experimental investigation. Int J Solids Struct 1992, 29:399-420.
16. Siron O., Chollon G., Tsuda H., Yamauchi H., Maeda K., Kosaka K. Microstructural and mechanical properties of filler-added coal-tar pitch-based C/C composites: the damage and fracture process in correlation with AE waveform parameters. Carbon 2001, 39:2065-2075.
17. Ramirez-Jimenez C.R., Papadakis N., Reynolds N., Gan T.H., Purnell P., Pharaoh M. Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. Compos Sci Technol 2004, 64:1819-1827.
18. Haselbach W., Lauke B. Acoustic emission of debonding between fibre and matrix to evaluate local adhesion. Compos Sci Technol 2003, 63:2155-2162.
19. Jiaa C.L., Dornfled D.A. Experimental studies of sliding friction and wear via acoustic emission signal analysis. Wear 1990, 139:403-424.
20. Gómez M.P., Hey A.M., Ruzzante J.E., D́Attellis C.E. Tool wear evaluation in drilling by acoustic emission. Phys Procedia 2010, 3:819-825.
21. Sreejith P.S., Krishnamurthy R. Acoustic emission studies on carbon/phenolic ablative composites using PCD and PCBN tools. Adv Compos Lett 1999, 8:89-93.
22. Kishore R.A., Tiwari R., Dvivedi A., Singh I. Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites. Mater Des 2009, 30:2186-2190.
23. Karimi N.Z., Heidary H., Ahmadi M. Residual tensile strength monitoring of drilled composite materials by acoustic emission. Mater Des 2012, 40:229-236.
24. Odom E.M., Adams D.F. Failure modes of unidirectional carbon/epoxy composite compression specimens. Composites 1990, 21:289-296.
25. Nagendra S., Gürdal Z., Haftka R.T., Starnes J.H. Buckling and failure characteristics of compression-loaded stiffened composite panels with a hole. Compos Struct 1994, 28:1-17.
26. Ghasemi Nejhad M.N., Chou T.W. Compression behavior of woven carbon fiber-reinforced epoxy composites with moulded-in and drilled holes. Composites 1990, 21:33-40.
27. Holford KM, Featherston CA, Pullin R, Eaton MJ. Acoustic emission monitoring of buckling behavior in impact-damaged composite plates. In: 26th European conf on acoustic emission testing, Berlin, Germany; 2004. p. 427-34.
28. ASTM Standard D 7137/D 7137M. Standard test method for compressive residual strength properties of damaged polymer matrix composite plates 1. ASTM, International; 2006.
29. Hocheng H., Tsao C.C. Effects of special drill bits on drilling-induced delamination of composite materials. Int J Mach Tools Manuf 2006, 46:1403-1416.
30. Gaitonde V.N., Karnik S.R., Rubio J.C., Correia A.E., Abrao A.M., Davim J.P. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. J Mater Process Technol 2007, 18:431-438.
31. Enemuoh E.U., El-Gizawy A.S., Okafor A.C. An approach for development of damage-free drilling of carbon fiber reinforced thermosets. Int J Mach Tool Manuf 2001, 41:1795-1814.
32. Mohan N.S., Kulkarni S.M., Ramachandra A. Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. J Mater Process Technol 2007, 186:265-271.
33. Abrao A.M., Campos Rubio J.C., Faria P.E., Davim J.P. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite. Mater Des 2008, 29:508-513.
34. Khashaba U.A., Seif M.A., Elhamid M.A. Drilling analysis of chopped composites. Composites: Part A 2007, 38:61-70.
35. Ramulu M., Branson T., Kim D. A study on the drilling of composite and titanium stacks. Compos Struct 2001, 54:67-77.
36. Karnik S.R., Gaitonde V.N., Rubio J.C., Correia A.E., Abro A.M., Davim J.P. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model. Mater Des 2008, 29:1768-1776.
37. Mohan N.S., Ramachandra A., Kulkarni S.M. Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites. Compos Struct 2005, 71:407-413.
38. Sardiñas R.Q., Reis P., Davim J.P. Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms. Compos Sci Technol 2006, 66:3083-3088.
39. Dharan C.K.H., Won M.S. Machining parameters for an intelligent machining system for composite laminates. Int J Mach Tools Manuf 2000, 40:415-426.