Performance analysis of media redundancy protocol (MRP)

IEEE Transactions on Industrial Informatics

Volumn 9, Issue 1, 2013, Pages 218-227

  Giorgetti, Alessio ^a   Cugini, Filippo ^b   Paolucci, Francesco ^a   Valcarenghi, Luca ^a   Pistone, Alessia ^c   Castoldi, Piero ^a  

^a SCUOLA SUPERIORE SANT ANNA   (Italy)

^b CNIT   (Italy)

^c Rete Ferroviaria Italiana SpA   (Italy)

Author keywords

IEC 62439; industrial area networks (IANs); industrial Ethernet; media redundancy protocol (MRP)

Indexed keywords

ETHERNET-BASED NETWORKS; FIELDBUS; IEC 62439; IEC STANDARDS; INDUSTRIAL AREA; INDUSTRIAL ETHERNETS; INTERNATIONAL ELECTROTECHNICAL COMMISSION; MEDIA REDUNDANCY PROTOCOL (MRP); PERFORMANCE ANALYSIS; REDUNDANCY MANAGEMENT;

ETHERNET;

REDUNDANCY;

EID: 84871971743     PISSN: 15513203     EISSN: None     Source Type: Journal    
DOI: 10.1109/TII.2012.2186584     Document Type: Article

References (29)

1. M. Ali, G. Chiruvolu, and A. Ge, "Traffic engineering in metro Ethernet," IEEE Netw., vol. 19, no. 2, pp. 10-17, Mar.-Apr. 2005. (Pubitemid 40573680)
2. L. L. Bello, G. Kaczynski, and O. Mirabella, "Improving the real-time behavior of Ethernet networks using traffic smoothing," IEEE Trans. Ind. Informat., vol. 1, no. 3, pp. 151-161, Aug. 2005. (Pubitemid 41482384)
3. J. D. Decotignie, "The many faces of industrial Ethernet," IEEE Ind. Electron. Mag., vol. 3, no. 1, pp. 8-19, Mar. 2009.
4. Media Access Control (MAC) Brigdes, IEEE Computer Society Standard 802.1D, 2004.
5. G. Prytz, "Network recovery time measurements of RSTP in an Ethernet ring topology," in Proc. ETFA'07, Sep. 2007, pp. 1247-1253.
6. M. Felser, "Media redundancy for PROFINET IO," in Proc. WFCS'08, May 2008, pp. 325-330.
7. M. Huynh, P. Mohapatra, S. Goose, and R. Liao, "RRR: Rapid ring recovery sub-millisecond decentralized recovery for Ethernet rings," IEEE Trans. Comput., vol. 60, no. 11, pp. 1561-1570, Nov. 2011.
8. N. Collins, "Boeing architecture and TOP (technical and office protocol)," in Proc. Int. Conf. Networking: A Large Organization Perspective, 1986, pp. 49-54.
9. R. Floyd, "Manufacturing automation protocol," in Proc. IEEE ICC'85, 1985, pp. 620-624.
10. A. Menendez, A. Barbancho, E. Personal, and D. Larios, "Industrial fieldbus improvements in power distribution and conducted noise immunity with no extra costs," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2653-2661, Jul. 2011.
11. M. Felser and T. Sauter, "The fieldbus war: History or short break between battles?," in Proc. WFCS'02, Sep. 2002, pp. 73-80.
12. J.-P. Thomesse, "Fieldbus technology in industrial automation," Proc. IEEE, vol. 93, no. 6, pp. 1073-1101, Jun. 2005. (Pubitemid 40940661)
13. J.-D. Decotignie, "Ethernet-based real-time and industrial communications," Proc. IEEE, vol. 93, no. 6, pp. 1102-1117, Jun. 2005. (Pubitemid 40940662)
14. T. Sauter, "The three generations of field-level networks-Evolution and compatibility issues," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3585-3595, Nov. 2010.
15. K. C. Lee, S. Lee, and M. H. Lee, "Worst case communication delay of real-time industrial switched Ethernet with multiple levels," IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1669-1676, Oct. 2006. (Pubitemid 44593517)
16. T. Skeie, S. Johannessen, and O. Holmeide, "Timeliness of real-time IP communication in switched industrial Ethernet networks," IEEE Trans. Ind. Informat., vol. 2, no. 1, pp. 25-39, Feb. 2006.
17. J. Jasperneite, J. Imtiaz, M. Schumacher, and K. Weber, "A proposal for a generic real-time Ethernet system," IEEE Trans. Ind. Informat., vol. 5, no. 2, pp. 75-85, May 2009.
18. G. Cena, I. C. Bertolotti, S. Scanzio, A. Valenzano, and C. Zunino, "Evaluation of EtherCAT distributed clock performance," IEEE Trans. Ind. Informat., vol. 8, no. 1, pp. 20-29, Feb. 2012.
19. M. Felser and T. Sauter, "Standardization of industrial Ethernet-The next battlefield?," in Proc. WFCS'04, Sep. 2004, pp. 413-420.
20. K. Hansen, "Redundancy Ethernet in industrial automation," in Proc. ETFA'05, Sep. 2005, pp. 941-947.
21. M. Felser, "Real-time Ethernet-Industry prospective," Proc. IEEE, vol. 93, no. 6, pp. 1118-1129, Jun. 2005.
22. L.Wisniewski, M. Hameed, S. Schriegel, and J. Jasperneite, "A survey of Ethernet redundancy methods for real-time Ethernet networks and its possible improvements," in Proc. IFAC FeT'09, May 2009, pp. 163-170.
23. C.-H. Chen and N.-F. Huang, "Lib: A last-in-backup based fast recovery scheme for ring-based industrial networks," IEEE Commun. Lett., vol. 15, no. 6, pp. 680-682, Jun. 2011.
24. Industrial Communication Networks-Fieldbus Specifications, IEC Standard 61158, 2007.
25. Digital Data Communications for Measurement and Control, IEC Standard 61784, 2003.
26. Industrial communication networks-High availability automation networks, IEC Standard 62439, 2010.
27. H. Kirrmann, M. Hansson, and P. Muri, "IEC 62439 PRP: Bumpless recovery for highly available, hard real-time industrial networks," in Proc. ETFA'07, Sep. 2007, pp. 1396-1399.
28. H. Kirrmann, K. Weber, O. Kleineberg, and H. Weibel, "HSR: Zero recovery time and low-cost redundancy for industrial Ethernet (high availability seamless redundancy, IEC 62439-3)," in Proc. ETFA'09, Sep. 2009.
29. OPNET Modeler, OPNET Technologies INC., 2012. [Online]. Available: www.opnet.com