Development of a method for recycling of CRT funnel glass

Environmental Technology (United Kingdom)

Volumn 33, Issue 22, 2012, Pages 2531-2537

  Ling, Tung Chai ^a,b   Poona, Chi Sun ^a  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Cathode ray tubes; Cement mortar; Lead extraction; Nitric acid; Recycled funnel glass

Indexed keywords

CATHODE RAY TUBES; CATHODES; CEMENTS; LEACHING; MORTAR; NITRIC ACID; RECYCLING; TUBES (COMPONENTS);

CEMENT MORTARS; CONCENTRATION LEVELS; ENVIRONMENTAL THREATS; FUNNEL GLASS; LABORATORY STUDIES; NATURAL SAND; NON HAZARDOUS WASTES; TOXICITY CHARACTERISTICS LEACHING PROCEDURES;

GLASS;

ACETIC ACID; LEAD;

CEMENT; CONCENTRATION (COMPOSITION); ENVIRONMENTAL RISK; LABORATORY METHOD; LEACHING; LEAD; MORTAR; NITRIC ACID; PARTICLE SIZE; POLLUTANT REMOVAL; RECYCLING; TOXICITY TEST;

CATHODE RAY TUBE; CHEMICAL REACTION; CONCENTRATION (PARAMETERS); CONFERENCE PAPER; DENSITY; EFFLUENT; ENVIRONMENTAL PROTECTION; HAZARDOUS WASTE; HEAVY METAL REMOVAL; LEACHING; LIMIT OF DETECTION; PARTICLE SIZE; PH; RADIATION SHIELD; RECYCLING; RELATIVE DENSITY; STRENGTH;

EID: 84871898622     PISSN: 09593330     EISSN: 1479487X     Source Type: Journal    
DOI: 10.1080/09593330.2012.666570     Document Type: Conference Paper

References (33)

1. C.H. Lee, C.T. Chang, K.S. Fan, and T.C. Chang, An overview of recycling and treatment of scrap computers, J. Hazard. Mater. 114 (2004), pp. 93-100.
2. C.H. Lee, and C.S. His, Recycling of scrap cathode ray tubes, Environ. Sci. Technol. 36 (2002), pp. 69-75.
3. T.G. Townsend, S.E. Musson, Y.C. Jang, and I.H. Chung, Characterization of lead leachability from cathode ray tubes using the toxicity characteristics leaching procedure, Environ. Sci. Technol. 34 (2000), pp. 4376-4381.
4. C.S. Poon, Management of CRT glass from discarded computer monitors and TV sets, Waste Manage. 28 (2008), p. 1499.
5. C.C. Gordon Yang, Environmental threats of discarded picture tubes and printed circuit boards, J. Hazard. Mater. 34 (1993), pp. 235-243.
6. F.M. Johnson, The genetic effects of environmental lead, Mutat. Res.-Rev. Mutat. 410(2) (1998), pp. 123-140. (Pubitemid 28241799)
7. K. Rousis, K. Moustakas, M. Stylianou, A. Papadopoulos, and M. Loizidou, Management of waste from electrical and electronic equipment: The case of television sets and refrigerators, J. Environ. Eng. Sci. 7 (2008), pp.105-114. (Pubitemid 351534669)
8. E. Bernardo, G. Scarinci, S. Hreglich, and G. Zangiacomi, Effect of time and furnace atmosphere on the sintering of glasses from dismantled cathode ray tubes, J. Eur. Ceram. Soc. 27 (2007), pp. 1637-1643. (Pubitemid 44743282)
9. M. Chen, F.-S. Zhang, and J. Zhu, Detoxification of cathode ray tube glass by self-propagating process, J. Hazard. Mater. 165 (2009), pp. 980-986.
10. S.E. Musson, Y.C. Jang, T.G. Townsend, and I.H. Chung, Characterization of lead leachability from cathode ray tubes using the toxicity characteristic leaching procedure, Environ. Sci. Technol. 34 (2000), pp. 4376-4381.
11. F. Mear, P. Yot, M. Cambon, and M. Ribes, The characterization of waste cathode-ray tube glass, Waste Manage. 26 (2006), pp. 1468-1476. (Pubitemid 44633666)
12. G. Foresman, and J.A. Foresman, Method for removing lead from coated glass, European Patent Office, Publication Number: WO0020121, 2000.
13. D.E Goforth, L.R. Morse, and S.T. Gulati, Lead extraction from CRT glasses, in SID International Symposium Digest of Technical Papers, SID, USA, 1994, pp. 905-908.
14. M.Yamashitaa, A.Wannagona, S. Matsumotoa, T. Akaia, H. Sugitac,Y. Imotoc, T. Komaic, and H. Sakanakura, Leaching behavior of CRT funnel glass, J. Hazard. Mater. 184 (2010), pp. 58-64.
15. E.M. Stephen, Y.C. Jang, G.T. Timothy, and I.H. Chung, Characterization of lead leachability from cathode ray tubes using the toxicity characteristic leaching procedure, Environ. Sci. Technol. 34 (2000), pp. 4376-4381.
16. A.J. Saterlay, S.J. Wilkins, and R.G. Compton, Towards greener disposal of waste cathode ray tubes via ultrasonically enhanced lead leaching, Green Chem. 3 (2001), pp. 149-155. (Pubitemid 33319369)
17. P.G. Yot and F.O. Méar, Lead extraction from waste funnel cathode-ray tubes glasses by reaction with silicon carbide and titanium nitride, J. Hazard. Mater. 172 (2009), pp. 117-123.
18. P.G, Yot and F.O. Méar, Characterization of lead, barium and strontium leachability from foam glasses elaborated using waste cathode ray-tube glasses, J. Hazard. Mater. 185 (2011), pp. 236-241.
19. M. Chen, F.-S. Zhang, and J. Zhu, Lead recovery and the feasibility of foam glass production from funnel glass of dismantled cathode ray tube through pyrovacuum process, J. Hazard. Mater. 161 (2009), pp. 1109-1113.
20. D. Kim, M. Quinlan, and T.F. Yen, Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems, Waste Manage. 29 (2009), pp. 321-328.
21. T.C. Ling and C.S. Poon, Utilization of recycled glass derived from cathode ray tube glass as fine aggregate in cement mortar, J. Hazard. Mater. 192 (2011), pp. 451-456.
22. U.S. Environmental Protection Agency, Test Method 1311, Toxicity Characteristic Leaching Procedure (TCLP), Specifications of the Committee on Analytical Reagents of the American Chemical.
23. ASTM C1437, Standard test method for flow of hydraulic cement mortar, American Society for Testing and Materials, West Conshohocken, US, 2007.
24. ASTM C 642, Standard test method for density, absorption, and voids in hardened concrete, American Society for Testing and Materials, West Conshohocken, US, 2006.
25. ASTM C348, Standard test method for flexural strength of hydraulic-cement mortars, American Society forTesting and Materials, West Conshohocken, US, 2008.
26. ASTM C 1260, Standard test method for potential alkali reactivity of aggregates (mortar-bar method), American Society for Testing and Materials,West Conshohocken, US, 2007.
27. A.C.M Chau, and K. Fung, Comparison of radiation dose for implant imaging using conventional spiral tomography, computed tomography, and cone-beam computed tomography, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 107 (2009), pp. 559-565.
28. T.C. Ling and C.S. Poon, Properties of architectural mortar prepared with recycled glass with different particle sizes, Mater. Design 32 (2011), pp. 2675-2684.
29. T.C. Ling, C.S. Poon, and S.C. Kou, Feasibility of using recycled glass in architectural cement mortar, Cem. Concr. Compos. 33 (2011), pp. 848-854.
30. ASTM C 1329, Standard specification for mortar cement, American Society for Testing and Materials, West Conshohocken, US, 2005.
31. G. Lee, T.C. Ling, Y.L. Wong, and C.S. Poon, Effects of crushed glass cullet sizes, casting methods and pozzolanic materials on ASR of concrete blocks, Constr. Build. Mater. 25 (2011), pp. 2611-2618.
32. J.W. Phair and J.S.J.Van Deventer, Effect of silicate activator pH on the leaching and mineral material characteristics of waste-based inorganic polymers, Mineral. Eng. 14 (2001), pp. 289-304. (Pubitemid 32874128)
33. D. Calabrese, A.M. Covington, and J.S. Thompson, Production of group IIA atomic and molecular negative ion beams in a cesium-sputter negative ion source, Nucl. Instr. Meth. Phys. Res. A 379 (1996), pp. 192-195. (Pubitemid 126385532)