Lead recovery from cathode ray tube funnel glass with mechanical activation

Journal of the Air and Waste Management Association

Volumn 63, Issue 1, 2013, Pages 2-10

  Yuan, Wenyi ^a   Li, Jinhui ^a   Zhang, Qiwu ^b   Saito, Fumio ^b   Yang, B ^c  

^a TSINGHUA UNIVERSITY   (China)

^b TOHOKU UNIVERSITY   (Japan)

^c CHINA UNIVERSITY OF MINING AND TECHNOLOGY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION ANALYSIS; ATMOSPHERIC PRESSURE; CATHODE RAYS; CATHODES; CHEMICAL ACTIVATION; GLASS; LEACHING; LEAD METALLURGY; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PHYSICOCHEMICAL PROPERTIES; RECOVERY; SCANNING ELECTRON MICROSCOPY; WASTE DISPOSAL;

ENVIRONMENTAL PROBLEMS; EXPERIMENTAL PARAMETERS; HEATING TEMPERATURES; LIQUID TO SOLID RATIO; MECHANICAL ACTIVATION; OPERATION AND MAINTENANCE; SPECIFIC SURFACE AREA (SSA); WASTE MANAGEMENT SYSTEMS;

CATHODE RAY TUBES;

GLASS; LEAD; NITRIC ACID;

ARTICLE; CATHODE RAY TUBE; CONTROLLED STUDY; ELECTRONIC WASTE; HEATING; LEACHING; MECHANICS; PARTICLE SIZE; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPE; X RAY DIFFRACTION;

EID: 84871873847     PISSN: 10962247     EISSN: 21622906     Source Type: Journal    
DOI: 10.1080/10962247.2012.711796     Document Type: Article

References (43)

1. Andreola, F., Barbiere, L., Corradi, A. and Lancellotti, I. 2005a. Cathode ray tube glass recycling: An example of clean technology. Waste. Manage. Res., 23: 314-321. doi:10.1177/0734242X05054422
2. Andreola, F., Barbieri, L., Corrade, A. and Lancellotti, I. 2007. CRT glass state of the art, a case study: Recycling in ceramic glazes. J. Eur. Ceram. Soc., 27: 1623-1629. doi:10.1016/j.jeurceramsoc.2006.05.009
3. Andreola, F., Barbieri, L., Corradi, A., Lancellotti, I., Falcone, R. and Hreglich, S. 2005b. Glass-ceramics obtained by the recycling of end of life cathode ray tubes glasses. Waste Manage., 25: 183-189. doi:10.1016/j.wasman.2004.12.007
4. Andreola, F., Barbieri, L., Karamanova, E., Lancellotti, I. and Pelino, M. 2008. Recycling of CRT panel glass as fluxing agent in the porcelain stoneware tile production. Ceram. Int., 34: 1289-1295. doi:10.1016/j.ceramint.2007.03.013
5. Baláž, P. 2003. Mechanical activation in hydrometallurgy. Int. J. Miner. Process., 72: 341-354.
6. Baláž, P. 2008. Mechanochemistry in Nanoscience and Minerals Engineering, Berlin: Verlag Berlin Heidelberg.
7. Bernardo, E. and Albertini, F. 2006. Glass foams from dismantled cathode ray tubes. Ceram. Int., 32: 603-608. doi:10.1016/j.ceramint.2005.04.019
8. Bernardo, E., Castellan, R. and Hreglich, S. 2007. Sintered glass-ceramics from mixtures of wastes. Ceram. Int., 33: 27-33. doi:10.1016/j.ceramint.2005.07.012
9. Bertoncello, R., Milanese, L., Bouquillon, A., Dran, J.C., Mille, B. and Salomon, J. 2004. Leaching of lead silicate glasses in acid environment: compositional and structural changes. Appl. Phys. A, 79: 193-198. doi:10.1007/s00339-004-2651-9
10. Bonnet, C., Bouquillon, A., Turrell, S., Deram, V., Mille, B., Salomon, J., Thomassin, J.H. and Fiaud, C. 2003. Alteration of lead silicate glasses due to leaching in heated acid solutions. J. Non-Cryst., 323: 214-220. doi:10.1016/S0022-3093(03)00279-5
11. Chen, M.J., Zhang, F.S. and Zhu, J.X. 2009. Lead recovery and the feasibility of foam glass production from funnel glass of dismantled cathode ray tube through pyrovacuum process. J. Hazard. Mater., 61: 1109-1113. doi:10.1016/j.jhazmat.2008.04.084
12. Chen, M.J., Zhang, F.S. and Zhu, J.X. 2010. Effective utilization of waste cathode ray tube glass-Crystalline silicotitanate synthesis. J. Hazard. Mater., 182: 45-49. doi:10.1016/j.jhazmat.2010.05.135
13. Environmental Protection Agency. 1986. Toxicity Characteristic Leaching Procedure. Federal Register. USA,
14. Guo, X. Y, Duan, X. D, G.H. and Mou, P. 2010. A review of mechanochemistry applications in waste management. Waste Manage., 30: 4-10. doi:10.1016/j.wasman.2009.08.017
15. Heineke, G. 1984. Tribochemistry, Berlin: Carl Hanser Publishing.
16. Herat, S. 2008. Recycling of cathode ray tubes (CRTs) in electronic waste. Clean, 36: 19-24. doi:10.1002/clen.200700082
17. Industry Council for Electronics Equipment Recycling (ICEER). 2004. Material Recovery from Waste Cathode Ray Tubes (CRTs), Waste and Resources Action Programme. Report 70, Banbury, UK: Waste and Resources Action Programme.
18. Jang, Y.C. and Townsend, T.G. 2003. Leaching of lead from computer printed wire boards and cathode ray tubes by municipal solid waste landfill leachates. Environ. Sci. Technol., 37: 4778-4784. doi:10.1021/es034155t
19. Lee, C.H., Chang, C.T., Fan, K.S. and Chang, T.C. 2004. An overview of recycling and treatment of scrap computers. J. Hazard. Mater., 114: 93-100. doi:10.1016/j.jhazmat.2004.07.013
20. Ling, T.C. and Poon, C.S. 2011. Utilization of recycled glass derived from cathode ray tube glass as fine aggregate in cement mortar. J. Hazard. Mater., 192: 451-456. doi:10.1016/j.jhazmat.2011.05.019
21. Méar, F., Yot, P., Cambon, M., Caplain, R. and Ribes, M. 2006a. Characterization of porous glasses prepared from Cathode Ray Tube (CRT). Powder Technol., 162: 59-63.
22. Méar, F., Yot, P., Cambon, M. and Ribes, M. 2005. The changes in lead silicate glasses induced by the addition of a reducing agent (TiN or SiC). J. Non-Cryst., 351: 3314-3319. doi:10.1016/j.jnoncrysol.2005.08.019
23. Méar, F., Yot, P., Cambon, M. and Ribes, M. 2006b. The characterization of waste cathode ray tube glass. Waste Manage., 26: 1468-1476. doi:10.1016/j.wasman.2005.11.017
24. Méar, F., Yot, P., Kolobov, A.V., Ribes, M., Guimon, M.F. and Gonbeau, D. 2007. Local structure around lead, barium and strontium in waste cathode ray tube glasses. J. Non-Cryst., 353: 4640-4646. doi:10.1016/j.jnoncrysol.2007.07.009
25. Méar, F., Yot, P. and Ribes, M. 2006c. Effects of temperature, reaction time and reducing agent content on the synthesis of macroporous foam glasses from waste funnel glasses. Mater. Lett., 60: 929-934. doi:10.1016/j.matlet.2005.10.046
26. Ma, R.J. 2007. Principle on Hydrometallurgy, Beijing: Metallurgical Industry Press.
27. Miyoshi, H., Chen, D.P. and Akai, T. 2004. A novel process utilizing subcritical water to remove lead from wasted lead silicate glass. Chem. Lett., 33: 956-957. doi:10.1246/cl.2004.956
28. Mizuno, M., Takahashi, M., Takaishi, T. and Yoko, T. 2005. Leaching of lead and connectivity of plumbate networks in lead silicate glasses. J. Am. Ceram. Soc., 88: 2908-2912. doi:10.1111/j.1551-2916.2005.00508.x
29. Mnzenberg, C.S., Meisel, W. and Gutlich, P. 1998. Changes of lead silicate glasses induced by leaching. J. Non-Cryst., 238: 83-90.
30. Musson, S.E., Jang, Y.C., Townsend, T.G. and Chung, I.H. 2000. Characterization of lead leachability from cathode ray tubes using the toxicity characteristic leaching procedure. Environ. Sci. Technol., 34: 4376-4381. doi:10.1021/es0009020
31. Nnorom, I.C., Osibanjo, O. and Ogwuegbu, M.O.C. 2011. Global disposal strategies for waste cathode ray tubes. Resour. Conserv. Recy., 55: 275-290. doi:10.1016/j.resconrec.2010.10.007
32. Poon, C.S. 2008. Management of CRT glass from discarded computer monitors and TV sets. Waste Manage., 28: 1499 doi:10.1016/j.wasman.2008.06.001
33. Saterlay, A.J., Wilkins, S.J. and Compton, R.G. 2001. Towards greener disposal of waste cathode ray tubes via ultrasonically enhanced lead leaching. Green Chem., 3: 149-155. doi:10.1039/b102671m
34. Scholze, H. 1982. Chemical durability of glasses. J. Non-Cryst., 52: 91-103. doi:10.1016/0022-3093(82)90283-6
35. Shanxi University of Science and Technology. 2006. Glass Technology, Beijing: China Light Industry Press.
36. Spalvins, E., Dubey, B. and Timothy, T.G. 2008. Impact of electronic waste disposal on lead concentrations in landfill leachate. Environ. Sci. Technol., 42: 7452-7458. doi:10.1021/es8009277
37. Tromans, D. and Meech, J.A. 2001. Enhanced dissolution of minerals: stored energy, amorphism and mechanical activation. Miner Eng., 14: 1359-1377. doi:10.1016/S0892-6875(01)00151-0
38. Williams, E., Kahhat, R., Allenby, B., Kavazanjian, E., Kim, J. and Xu, M. 2008. Environmental, social, and economic implications of global reuse and recycling of personal computers. Environ. Sci. Technol., 42: 6446-6454. doi:10.1021/es702255z
39. Yamashita, M., Wannagon, A., Matsumoto, S., Akai, T., Sugita, H., Imoto, Y., Komai, T. and Sakanakura, H. 2010. Leaching behavior of CRT funnel glass. J. Hazard. Mater., 184: 58-64. doi:10.1016/j.jhazmat.2010.08.002
40. Yang, J., Lu, B. and Xu, C. 2008. WEEE flow and mitigating measures in China. Waste Manage., 28: 1589-1597. doi:10.1016/j.wasman.2007.08.019
41. Yot, P.G. and Méar, F. 2009. Lead extraction from waste funnel cathode-ray tubes glasses by reaction with silicon carbide and titanium nitride. J. Hazard. Mater., 172: 117-123. doi:10.1016/j.jhazmat.2009.06.137
42. Yu, J., Williams, E., Ju, M. and Yang, Y. 2010. Forecasting global generation of obsolete personal computers. Environ. Sci. Technol., 44: 3232-3237. doi:10.1021/es903350q
43. Yuan, W.Y., Li, J.H., Zhang, Q.W. and Saito, F. 2012. Innovated application of mechanical activation to separate lead from scrap cathode ray tube funnel glass. Environ. Sci. Technol., 46: 4109-4114. doi:10.1021/es204387a