Energy-efficient production systems through schedule-based operations

IEEE Transactions on Automation Science and Engineering

Volumn 10, Issue 1, 2013, Pages 27-37

  Chen, Guorong ^a   Zhang, Liang ^a   Arinez, Jorge ^b   Biller, Stephan ^c  

^a University of Wisconsin   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c GE GLOBAL RESEARCH   (United States)

Author keywords

Bernoulli machine; energy efficient manufacturing; operations schedule; serial lines; transient analysis

Indexed keywords

ANALYTICAL PERFORMANCE; AUTOMOTIVE PAINTS; BERNOULLI; CONSTRAINED OPTIMIZATION PROBLEMS; ECONOMICAL METHODS; ENERGY EFFICIENT; FINITE BUFFER; GENERAL ASSEMBLY; MACHINE CYCLE; MACHINE EFFICIENCY; MACHINE RELIABILITY; OPERATIONS SCHEDULE; PRODUCTION OPERATIONS; PRODUCTION PROBLEMS; PRODUCTION SYSTEM; RELIABILITY MODEL; SERIAL LINE; SERIAL PRODUCTION LINE; TIME-DEPENDENT;

CONSTRAINED OPTIMIZATION; ENERGY UTILIZATION; MACHINE SHOPS; MANUFACTURE; PAINT; PRODUCTION ENGINEERING; TRANSIENT ANALYSIS;

ENERGY EFFICIENCY;

EID: 84871756814     PISSN: 15455955     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASE.2012.2202226     Document Type: Article

References (33)

1. N. Viswanadham and Y. Narahari, Performance Modeling of Automated Manufacturing Systems. Englewood Cliff, NJ: Prentice Hall, 1992.
2. J. A. Buzacott and J. G. Shanthikumar, Stochastic Models of Manufacturing Systems. Englewood Cliff, NJ: Prentice Hall, 1993.
3. H. T. Papadopoulos, C. Heavy, and J. Browne, Queueing Theory in Manufacturing Systems Analysis and Design. London, U. K.: Chapman & Hill, 1993.
4. S. B. Gershwin, Manufacturing Systems Engineering. Englewood Cliff, NJ: Prentice Hall, 1994.
5. T. Altiok, Performance Analysis of Manufacturing Systems. New York: Springer-Verlag, 1997.
6. J. Li and S. M. Meerkov, Production Systems Engineering. New York: Springer, 2009.
7. "U. S. Department of Commerce: Annual Survey of Manufacturers, " 2009. [Online]. Available: http://www. census. gov/manufacturing/asm/ index. html
8. K. Kissock, K. Hallinan, andW. Bader, "Energy and waste reduction opportunities in industrial processes, " Strategic Planning for Energy and the Environment, vol. 21, no. 1, pp. 40-53, 2001. (Pubitemid 32694281)
9. G. Boyd, "Development of a performance-based industrial energy efficiency indicator for automobile assembly plants, " Argonne National Laboratory, Argonne, IL, ANL/DIS-05-3, 2005.
10. G. Boyd, E. Dutrow, and W. Tunnessen, "The evolution of the energy star energy performance indicator for benchmarking industrial plant manufacturing energy use, " J. Cleaner Prod., vol. 16, no. 6, pp. 709-715, 2008. (Pubitemid 350253145)
11. F. K. Pil and S. Rothenberg, "Environmental performance as a driver of superior quality, " Prod. Oper. Manage., vol. 12, no. 2, pp. 404-415, 2003. (Pubitemid 39374577)
12. C. J. Corbett and R. D. Klassen, "Extending the horizons: Environmental excellence as key to improving operations, " Manuf. Service Oper. Manage., vol. 8, no. 1, pp. 5-22, 2006.
13. J. Wang, J. Li, and N. Huang, "Optimal scheduling to achieve energy reduction in automotive paint shops, " in Proc. ASME Manuf. Sci. Eng. Conf., West Lafayette, IN, 2009, pp. 161-167.
14. C. P. A. Guerrero, J. Wang, J. Li, J. Arinez, S. Biller, N. Huang, and G. Xiao, "Production system design to reduce energy consumption:A case study in automotive paint shop, " in Proc. Int. Symp. Flexible Autom., Tokyo, Japan, 2010.
15. B. E. Nicholson, "Scheduling shutdowns for manufacturing systems with an application to automotive production lines: Optimization models and computation, " Ph. D. dissertation, Univ. Michigan, Ann Arbor, MI, 2008.
16. Y. Dallery and S. B. Gershwin, "Manufacturing flow line systems: A review of models and analytical results, " Queueing Systems: Theory and Applications, vol. 12, no. 1-2, pp. 3-94, 1992.
17. H. T. Papadopoulos and C. Heavy, "Queueing theory in manufacturing systems analysis and design: A classification of models for production and transfer lines, " Eur. J. Oper. Res., vol. 92, no. 1, pp. 1-27, 1996. (Pubitemid 126372211)
18. S. B. Gershwin and M. H. Burman, "A decomposition method for analyzing inhomogeneous assembly/disassembly systems, " Ann. Oper. Res., vol. 93, pp. 91-115, 2000.
19. T. Tolio, A. Matta, and S. Gershwin, "Analysis of two-machine lines with multiple failure modes, " IIE Trans., vol. 34, pp. 51-62, 2002. (Pubitemid 34138158)
20. J. Li, "Overlapping decomposition: A system-theoretic method for modeling and analysis of complex manufacturing systems, " IEEE Trans. Autom. Sci. Eng., vol. 2, no. 1, pp. 40-53, 2005. (Pubitemid 40162874)
21. S. M. Meerkov and L. Zhang, "Transient behavior of serial production lines with Bernoulli machines, " IIE Trans., vol. 40, no. 3, pp. 297-312, 2008.
22. L. Zhang, C. Wang, J. Arinez, and S. Biller, "Transient analysis of Bernoulli serial lines: Performance evaluation and system-theoretic properties, " IIE Trans., 2012, to be published.
23. D. Jacobs and S. M. Meerkov, "A system-theoretic property of serial production lines-Improvability, " Int. J. Syst. Sci., vol. 26, no. 5, pp. 755-785, 1995.
24. T. Kolta, "Selecting equipment to control air pollution fromautomotive painting operations, " in Soc. Automotive Eng. (SAE) Int. Congr. Expo., 1992.
25. G. J. Roelant, A. J. Kemppainen, and D. R. Shonnard, "Assessment of the automobile assembly paint process for energy, environmental, and economic improvement, " J. Ind. Ecology, vol. 8, pp. 173-191, 2004. (Pubitemid 38852182)
26. S. Papasavva, S. Kia, J. Claya, and R. Gunther, "Characterization of automotive paints: An environmental impact analysis, " Progress in Organic Coatings, vol. 43, no. 1-3, pp. 193-206, 2001. (Pubitemid 33125974)
27. J.-T. Lim, S. M. Meerkov, and F. Top, "Homogeneous, asymtotically reliable serial production lines: Theory and a case study, " IEEE Trans. Automatic Control, vol. 35, no. 5, pp. 524-534, 1990. (Pubitemid 20713302)
28. J. Li, "Throughput analysis in automotive paint shops: A case study, " IEEE Trans. Autom. Sci. Eng., vol. 1, no. 1, pp. 90-98, 2004.
29. J. Li, D. E. Blumenfeld, and S. P. Marin, "Manufacturing system design to improve quality buy rate: An automotive paint shop application study, " IEEE Trans. Autom. Sci. Eng., vol. 4, no. 1, pp. 75-79, Jan. 2007. (Pubitemid 46113501)
30. J. Arinez, S. Biller, S. Marin, S. M. Meerkov, and L. Zhang, "Quantity/Quality improvement in an automotive paint shop: A case study, " IEEE Trans. Autom. Sci. Eng., vol. 7, no. 4, pp. 755-761, Oct. 2010.
31. E. Sadeghipour, E. Westervelt, and S. Bhattacharya, "Painting green: Design and analysis of an environmentally and energetically conscious paint booth hvac control system, " in Proc. Amer. Control Conf., 2008, pp. 3325-3330.
32. E. Müller and T. Löffler, "Improving Energy Efficiency in Manufacturing Plants-Case Studies and Guidelines, " Chemnitz Univ. Technol., Saxony, Germany, Tech. Rep., 2009.
33. J. Geldermann, M. Treitz, and O. Rentz, "Integrated technique assessment based on the pinch analysis approach for the design of production networks, " Eur. J. Oper. Res., vol. 171, no. 3, pp. 1020-1032, 2006. (Pubitemid 43132961)