Multiobjective optimization for empty and foam-filled square columns under oblique impact loading

International Journal of Impact Engineering

Volumn 54, Issue , 2013, Pages 177-191

  Yang, Shu ^a   Qi, Chang ^a  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Crashworthiness; Foam filled; Kriging model; Multiobjective optimization; Oblique impact

Indexed keywords

AXIAL LOADING; DESIGN OBJECTIVES; DYNAMIC FINITE ELEMENT ANALYSIS; FOAM-FILLED; IMPACT ANGLES; KRIGING METAMODELS; KRIGING MODEL; LOAD ANGLE; MATERIAL PARAMETER; MOD PROCESS; MULTI OBJECTIVE PARTICLE SWARM OPTIMIZATION; MULTIPLE IMPACT; MULTIPLE LOADS; OBLIQUE IMPACT; OPTIMAL DESIGN; OPTIMIZED CONFIGURATION; PARETO FRONT; ROBUST DESIGNS; SINGLE ANGLES; SPECIFIC ENERGY ABSORPTION; THEORETICAL SOLUTIONS; THIN-WALLED;

CRASHWORTHINESS; DESIGN;

MULTIOBJECTIVE OPTIMIZATION;

EID: 84871733439     PISSN: 0734743X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijimpeng.2012.11.009     Document Type: Article

References (56)

1. T. Wierzbicki, and W. Abramowicz On the crushing mechanics of thin-walled structures J Appl Mech-Trans ASME 50 1983 727 734
2. W. Abramowicz, and N. Jones Dynamic progressive buckling of circular and square tubes Int J Impact Eng 4 1986 243 270 (Pubitemid 17567023)
3. S.R. Guillow, G.X. Lu, and R.H. Grzebieta Quasi-static axial compression of thin-walled circular aluminum tubes Int J Mech Sci 43 2001 2103 2123 (Pubitemid 32737092)
4. A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos, and C. Dimitriou Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section Thin Walled Struct 41 2003 891 900
5. X. Zhang, G. Cheng, and H. Zhang Theoretical prediction and numerical simulation of multi-cell square thin-walled structures Thin Walled Struct 44 2006 1185 1191
6. Z. Tang, S. Liu, and Z. Zhang Energy absorption properties of non-convex multi-corner thin-walled columns Thin Walled Struct 51 2012 112 120
7. A. Alavi Nia, H. Badnava, and K. Fallah Nejad An experimental investigation on crack effect on the mechanical behavior and energy absorption of thin-walled tubes Mater Des 32 2011 3594 3607
8. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of square aluminium extrusions with aluminium foam filler Int J Impact Eng 24 2000 347 383 (Pubitemid 30555610)
9. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler Int J Impact Eng 24 2000 475 507 (Pubitemid 30567340)
10. Z. Ahmad, and D.P. Thambiratnam Crushing response of foam-filled conical tubes under quasi-static axial loading Mater Des 30 2009 2393 2403
11. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Optimum design for energy absorption of square aluminum columns with aluminum foam filler Int J Mech Sci 43 2001 153 176 (Pubitemid 33375912)
12. S. Santosa, and T. Wierzbicki Crash behavior of box columns filled with aluminum honeycomb or foam Comp Struct 68 1998 343 367 (Pubitemid 128416613)
13. N. Nariman-zadeh, A. Darvizeh, and A. Jamali Pareto optimization of energy absorption of square aluminium columns using multi-objective genetic algorithms Proc Inst Mech Eng Part B-J Eng Manuf 220 2006 213 224 (Pubitemid 46594293)
14. S. Hou, Q. Li, S. Long, X. Yang, and W. Li Crashworthiness design for foam filled thin-wall structures Mater Des 30 2009 2024 2032
15. H. Zarei, and M. Kröger Optimum honeycomb filled crash absorber design Mater Des 29 2008 193 204 (Pubitemid 47400159)
16. H.R. Zarei, and M. Kröger Optimization of the foam-filled aluminum tubes for crush box application Thin Walled Struct 46 2008 214 221 (Pubitemid 351178882)
17. H.R. Zarei, and M. Kröger Bending behavior of empty and foam-filled beams: structural optimization Int J Impact Eng 35 2008 521 529
18. H. Yin, G. Wen, S. Hou, and K. Chen Crushing analysis and multiobjective crashworthiness optimization of honeycomb-filled single and bitubular polygonal tubes Mater Des 32 2011 4449 4460
19. Y. Zhang, G. Sun, G. Li, Z. Luo, and Q. Li Optimization of foam-filled bitubal structures for crashworthiness criteria Mater Des 38 2012 99 109
20. E. Acar, M.A. Guler, B. Gerçeker, M.E. Cerit, and B. Bayram Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations Thin Walled Struct 49 2011 94 105
21. G. Sun, G. Li, M. Stone, and Q. Li A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials Comp Mater Sci 49 2010 500 511
22. G. Sun, G. Li, S. Hou, S. Zhou, W. Li, and Q. Li Crashworthiness design for functionally graded foam-filled thin-walled structures Mat Sci Eng A-Struct 527 2010 1911 1919
23. A. Reyes Square aluminum tubes subjected to oblique loading Int J Impact Eng 28 2003 1077 1106
24. D.C. Han, and S.H. Park Collapse behavior of square thin-walled columns subjected to oblique loads Thin Walled Struct 35 1999 167 184 (Pubitemid 32082179)
25. A. Reyes, M. Langseth, and O.S. Hopperstad Crashworthiness of aluminum extrusions subjected to oblique loading experiments and numerical analyses Int J Mech Sci 44 2002 1965 1984 (Pubitemid 35214392)
26. A. Reyes, O.S. Hopperstad, and M. Langseth Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study Int J Solids Struct 41 2004 1645 1675 (Pubitemid 38149670)
27. G. Nagel, and D. Thambiratnam A numerical study on the impact response and energy absorption of tapered thin-walled tubes Int J Mech Sci 46 2004 201 216
28. G. Nagel, and D. Thambiratnam Computer simulation and energy absorption of tapered thin-walled rectangular tubes Thin Walled Struct 43 2005 1225 1242 (Pubitemid 41023741)
29. G. Nagel, and D. Thambiratnam Dynamic simulation and energy absorption of tapered thin-walled tubes under oblique impact loading Int J Impact Eng 32 2006 1595 1620
30. Z. Ahmad, D.P. Thambiratnam, and A.C.C. Tan Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading Int J Impact Eng 37 2010 475 488
31. C. Qi, S. Yang, and F. Dong Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading Thin Walled Struct 59 2012 103 119
32. H. Kurtaran, A. Eskandarian, D. Marzougui, and N.E. Bedewi Crashworthiness design optimization using successive response surface approximations Comput Mech 29 2002 409 421 (Pubitemid 35422280)
33. W.G. Chen, and T. Wierzbicki Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption Thin Walled Struct 39 2001 287 306 (Pubitemid 32272126)
34. H.-S. Kim New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency Thin Walled Struct 40 2002 311 327 (Pubitemid 34156705)
35. J. Hallquist LS-DYNA keyword user's manual, version: 970 2003 Livermore Software Technology Corporation
36. ANSYS I. ANSYS documentation. ANSYS LS-DYNA user's guide, version 8.1; 2004.
37. L.W. Guo, and J.L. Yu Experimental investigations on the quasi-static axial crushing of foam-filled double square columns J Exp Mech 25 2010 271 278
38. M. Langseth, and O.S. Hopperstad Static and dynamic axial crushing of square thin-walled aluminium extrusions Int J Impact Eng 18 1996 949 968 (Pubitemid 126371759)
39. L.J. Gibson, and M.F. Ashby Cellular solids. Structure and properties 1988 Pergamon Press Oxford
40. A.G. Hanssen, O.S. Hopperstad, M. Langseth, and H. Ilstad Validation of constitutive models applicable to aluminium foams Int J Mech Sci 44 2002 359 406 (Pubitemid 34222678)
41. H.-W. Song, Z.-J. Fan, G. Yu, Q.-C. Wang, and A. Tobota Partition energy absorption of axially crushed aluminum foam-filled hat sections Int J Solids Struct 42 2005 2575 2600 (Pubitemid 40114288)
42. J. Bi, H. Fang, Q. Wang, and X. Ren Modeling and optimization of foam-filled thin-walled columns for crashworthiness designs Finite Elem Anal Des 46 2010 698 709
43. S. Hou, X. Han, G. Sun, S. Long, W. Li, and X. Yang Multiobjective optimization for tapered circular tubes Thin Walled Struct 49 2011 855 863
44. H. Fang, M. Rais-Rohani, Z. Liu, and M.F. Horstemeyer A comparative study of metamodeling methods for multiobjective crashworthiness optimization Comput Struct 83 2005 2121 2136 (Pubitemid 41084679)
45. R.H. Myers, and D.C. Montgomery Response surface methodology: process and product optimization using designed experiments 1995 Wiley New York
46. P. Lancaster, and K. Salkauskas Surfaces generated by moving least square methods Math Comput 37 1981 141 158
47. E. Acar, and M. Rais-Rohani Ensemble of metamodels with optimized weight factors Struct Multidisc Optim 37 2008 279 294
48. S. Ding, H. Li, C. Su, J. Yu, and F. Jin Evolutionary artificial neural networks: a review Artif Intell Rev 2011 1 10
49. T.W. Simpson, T.M. Mauery, J.J. Korte, and F. Mistree Kriging models for global approximation in simulation-based multidisciplinary design optimization AIAA J 39 2001 2233 2241 (Pubitemid 34023417)
50. K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan A fast and elitist multiobjective genetic algorithm: NSGA-II IEEE Trans Evol Comput 6 2002 182 197 (Pubitemid 34555372)
51. B. Suman Study of simulated annealing based algorithms for multiobjective optimization of a constrained problem Comput Chem Eng 28 2004 1849 1871 (Pubitemid 38638304)
52. C.A. Coello Coello, G.T. Pulido, and M.S. Lechuga Handling multiple objectives with particle swarm optimization IEEE Trans Evol Comput 8 2004 256 279
53. P.Y. Papalambros, and D.J. Wilde Principles of optimal design: modeling and computation 2000 Cambridge New York
54. M. Redhe, J. Forsberge, T. Janssone, P.O. Marklund, and L. Nilsson Using the response surface methodology and the D-optimality criterion in crashworthiness related problems-an analysis of the surface approximation error versus the number of function evaluations Struct Multidisc Optim 24 2002 185 194 (Pubitemid 35186125)
55. Stander N, Roux W, Giger M, Redhe M, Fedorova N, Haarhoff J. Crashworthiness optimization in LS-OPT: case studies in metamodeling and random search techniques. In: proceedings of the 4th European LS-DYNA users conference, Ulm, Germany, May 22-23; 2003.
56. G. Sun, G. Li, S. Zhou, H. Li, S. Hou, and Q. Li Crashworthiness design of vehicle by using multiobjective robust optimization Struct Multidisc Optim 44 2011 99 110