Enhanced toughness and shape memory behaviors of toughed epoxy resin

High Performance Polymers

Volumn 24, Issue 8, 2012, Pages 702-709

  Zhang, Chun Hua ^a   Wei, Hui Ge ^a   Liu, Yu Yan ^a   Tan, Hui Feng ^a   Guo, Zhanhu ^b  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

^b Lamar University   (United States)

Author keywords

mechanical properties; shape memory effects; shape memory epoxy; toughening

Indexed keywords

DIGLYCIDYL ETHER; EPOXY RESIN MATRIX; EPOXY RESIN SYSTEM; GOOD COMPATIBILITY; LOADING LEVEL; POLYPROPYLENE GLYCOL; RESIN SYSTEMS; SHAPE MEMORY; SHAPE MEMORY BEHAVIOR; SHAPE RECOVERY; TOUGHENING AGENTS;

BRITTLE FRACTURE; EPOXY RESINS; ETHERS; IMPACT STRENGTH; LOADING; MECHANICAL PROPERTIES; SCANNING ELECTRON MICROSCOPY; SHAPE MEMORY EFFECT; SHAPE OPTIMIZATION; TOUGHENING;

RESINS;

EID: 84870542759     PISSN: 09540083     EISSN: 13616412     Source Type: Journal    
DOI: 10.1177/0954008312449846     Document Type: Article

References (44)

1. Liu C, Qin H, Mather P. Review of progress in shape-memory polymers. J Mater Chem. 2007 ; 17: 1543-1558
2. Xie T, Xiao X, Cheng YT. Revealing triple shape memory effect by polymer bilayers. Macromol Rapid Commun. 2009 ; 30: 1823-1827
3. Lendlein A, Jiang H, Jünger O, et al. Light-induced shape-memory polymers. Nature. 2005 ; 434: 879-882
4. Jiang H, Kelch S, Lendlein A. Polymers move in response to light. Adv Mater. 2006 ; 18: 1471-1475
5. Huang W, Yang B, An L, et al. Water-driven programmable polyurethane shape memory polymer: Demonstration and mechanism. Appl Phys Lett. 2005 ; 86: 114105-114105-3
6. Ahmad M, Luo J, Singh D, et al. Shape memory effect and thermomechanical properties of shape memory polymer fabric composite in tension mode. World J Eng. 2012 ; 9: 85-92
7. Ratna D, Karger-Kocsis J. Recent advances in shape memory polymers and composites: a review. J Mater Sci. 2008 ; 43: 254-269
8. Chung YC, Shim YS, Chun BC. Effect of glucose crosslinking on thermomechanical properties and shape memory effect of PET PEG copolymers. J. Appl. Polym. Science. 2008 ; 109: 3533-3539
9. Liu C, Chun SB, Mather PT, et al. Chemically cross-linked polycyclooctene: synthesis, characterization, and shape memory behavior. Macromolecules. 2002 ; 35: 9868-9874
10. Merline J, Reghunadhan Nair C, Gouri C, et al. Poly (urethane- oxazolidone): Synthesis, characterisation and shape memory properties. Eur Polym J. 2007 ; 43: 3629-3637
11. Yakacki CM, Shandas R, Safranski D, et al. Strong, tailored, biocompatible shape-memory polymer networks. Adv Funct Mater. 2008 ; 18: 2428-2435
12. Lake MS, Campbell D. The fundamentals of designing deployable structures with elastic memory composites. IEEE Aerospace Conference. 2004 ; 4: 2745-2756
13. Lan X, Liu Y, Lv H, et al. Fiber reinforced shape-memory polymer composite and its application in a deployable hinge. Smart Mater Struct. 2009 ; 18: 024002
14. Gall K, Dunn ML, Liu Y, et al. Shape memory polymer nanocomposites. Acta Mater. 2002 ; 50: 5115-5126
15. Campbell D, Lake MS, Scherbarth MR, et al 46th AIAA/ASME/ASCE/AHS/ASC Struct., Struct. Dyn., Mater. Conf. 2005: 1-12.
16. Mileti S, Guarrera G, Marchetti M, et al. The FLECS expandable module concept for future space missions and an overall description on the material validation. Acta Astronaut. 2006 ; 59: 220-229
17. Mather PT, Luo X, Rousseau IA. Shape memory polymer research. Annu Rev Res. 2009 ; 39: 445-471
18. Xie T, Rousseau IA. Facile tailoring of thermal transition temperatures of epoxy shape memory polymers. Polymer. 2009 ; 50: 1852-1856
19. Leonardi AB, Fasce LA, Zucchi IA, et al. Shape memory epoxies based on networks with chemical and physical crosslinks. Eur Polym J. 2010 ; 3: 362-369
20. Liu Y, Han C, Tan H, et al. Thermal, mechanical and shape memory properties of shape memory epoxy resin. Mater Sci Eng: A. 2010 ; 527: 2510-2514
21. Tian B, Chen F, Tong Y, et al. Bending properties of epoxy resin matrix composites filled with Ni-Mn-Ga ferromagnetic shape memory alloy powders. Mater Lett. 2009 ; 63: 1729-1732
22. Shimamoto A, Zhao H, Azakami T. Active control for stress intensity of crack-tips under mixed mode by shape memory TiNi fiber epoxy composites. Smart Mater Struct. 2007 ; 16: 13-21
23. Liu Y, Gall K, Dunn ML, et al. Thermomechanical recovery couplings of shape memory polymers in flexure. Smart Mater Struct. 2003 ; 12: 947-954
24. Liu Y, Gall K, Dunn ML, et al. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Int J Plast. 2006 ; 22: 279-313
25. Hsieh T, Kinloch A, Taylor A, et al. The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer. J Appl Polym Sci. 2011 ; 119: 2135-2142
26. Gojny F, Wichmann M, Kopke U, et al. Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Compos Sci Technol. 2004 ; 64: 2363-2371
27. González-Domínguez JM, Ansón-Casaos A, Díez-Pascual AM, et al. Solvent-free preparation of high-toughness epoxy- SWNT composite materials. ACS Appl Mater Interfaces. 2011 ; 3: 1441-1450
28. Bortz DR, Heras EG, Martin-Gullon I.. Impressive fatigue life and fracture toughness improvements in graphene oxide/epoxy composites. Macromolecules. 2011 ; 45: 238-245
29. Zhu J, Wei S, Yadav A, et al. Rheological behaviors and electrical conductivity of epoxy resin nanocomposites suspended with in-situ stabilized carbon nanofibers. Polymer. 2010 ; 51: 2643-2651
30. Zhu J, Wei S, Ryu J, et al. In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites. J Mater Chem. 2010 ; 20: 4937-4948
31. Zhu J, Wei S, Ryu J, et al. Magnetic epoxy resin nanocomposites reinforced with core-shell structured Fe@FeO nanoparticles: fabrication and property analysis. ACS Appl Mater Interfaces. 2010 ; 2: 2100-2107
32. Wang Z, Yang X, Wang Q, et al. Epoxy resin nanocomposites reinforced with ionized liquid stabilized carbon nanotubes. Int JSmart Nano Mater. 2011 ; 2: 176-193
33. Hollertz R, Chatterjee S, Gutmann H, et al. Improvement of toughness and electrical properties of epoxy composites with carbon nanotubes prepared by industrially relevant processes. Nanotechnol. 2011 ; 22: 125702-125710
34. Hsieh T, Kinloch A, Taylor A, et al. The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer. J Mater Sci. 2011 ; 46: 7525-7535
35. LiuF.Study on Preparation of Shape Memory Epoxy Resin and Properties of Its Composites. Master dissertation, Harbin Institute of Technology, 2009.
36. Gurrappa I, Binder L.. Electrodeposition of nanostructured coatings and their characterization-a review. Sci Technol Adv Mater. 2008 ; 9: 043001-043011
37. KaelbleJohn DH Physical Chemistry of Adhesion. New York: Wiley & Sons ; 1971:
38. Li F, Larock RC. New soybean oil-styrene-divinylbenzene thermosetting copolymers. v. shape memory effect. J Appl Polym Sci. 2002 ; 84: 1533-1543
39. Lin J, Chen L.. Study on shape memory behavior of polyether based polyurethanes. I. Influence of the hard segment content. J Appl Polym Sci. 1998 ; 69: 1563-1574
40. Shishmakov A, Erankin S, Mikushina YV, et al. Activated carbon and carbon-oxide composite materials derived from powdered cellulose. Russ J Appl Chem. 2010 ; 83: 307-311
41. Sánchez-Soto M, Pages P, Lacorte T, et al. Curing FTIR study and mechanical characterization of glass bead filled trifunctional epoxy composites. Compos Sci Technol. 2007 ; 67: 1974-1985
42. Levita G. Matrix ductility and toughening of epoxy resins. Adv Chem Ser. 1989 ; 222: 93-118
43. Hodgkin J, Simon G, Varley R. Thermoplastic toughening of epoxy resins: a critical review. Polym Adv Technol. 1998 ; 9: 3-10
44. Guo Z, Pereira T, Choi O, et al. Surface functionalized alumina nanoparticle filled polymeric nanocomposites with enhanced mechanical properties. J Mater Chem. 2006 ; 16: 2800-2808