Multi-dimensional transient temperature simulation and back-calculation for thermal properties of building materials

Building and Environment

Volumn 59, Issue , 2013, Pages 501-516

  Li, Hui ^a   Harvey, John ^a   Jones, David ^a  

^a University of California   (United States)

Author keywords

Heat transfer; Modeling and simulation; Thermal environment; Thermal properties

Indexed keywords

BUILT ENVIRONMENT; CONCRETE MATERIALS; COOL MATERIALS; CRITICAL CHALLENGES; FLOW CONDITION; MODELING AND SIMULATION; POROUS CONCRETES; SIZE AND SHAPE; STEADY-STATE HEAT TRANSFER; TARGET TEMPERATURE; THERMAL BEHAVIORS; THERMAL ENVIRONMENT; THERMAL PERFORMANCE; TRANSIENT METHOD; TRANSIENT MODEL; TRANSIENT TEMPERATURE; TRANSIENT TEMPERATURE SIMULATION;

BUILDING MATERIALS; COMPUTER SIMULATION; HEAT TRANSFER; TEMPERATURE; THERMODYNAMIC PROPERTIES;

THERMAL CONDUCTIVITY;

AIR TEMPERATURE; COMPUTER SIMULATION; CONSTRUCTION MATERIAL; HEAT FLOW; HEAT TRANSFER; THERMAL CONVECTION; THERMODYNAMIC PROPERTY; HEAT CAPACITY; MODELING; THERMAL CONDUCTIVITY;

CALLUNA VULGARIS;

EID: 84870418666     PISSN: 03601323     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.buildenv.2012.09.019     Document Type: Article

References (52)

1. Synnefa A., Karlessi T., Gaitani N., Santamouris M., Assimakopoulos D.N., Papakatsikas C. Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate. Build Environ 2011, 46:38-44.
2. Xu T., Sathaye J., Akbari H., Garg V., Tetali S. Quantifying the direct benefits of cool roofs in an urban setting: reduced cooling energy use and lowered greenhouse gas emissions. Build Environ 2012, 48:1-6.
3. Santamouris M., Gaitani N., Spanou A., Saliari M., Giannopoulou K., Vasilakopoulou K., et al. Using cool paving materials to improve microclimate of urban areas - design realization and results of the Flisvos project. Build Environ 2012, 53:128-136.
4. Santamouris M. Cooling the cities - a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments. Solar Energy in press. Available from: http://dx.doi.org/10.1016/j.solener.2012.07.003.
5. Akbari H., Matthews H.D., Donny S. The long-term effect of increasing the albedo of urban areas. Environ Res Lett 2012, 7:024004.
6. Akbari H, Matthews HD. Global cooling updates: reflective roofs and pavements. Energy Buildings in press. Available from: http://dx.doi.org/10.1016/j.enbuild.2012.02.055.
7. Green infrastructure programs 2010, EPA U, [cited 2011 Mar. 10]; Available from:. http://cfpub.epa.gov/npdes/greeninfrastructure/gicasestudies.cfm.
8. Mahmoud A.H.A. Analysis of the microclimatic and human comfort conditions in an urban park in hot and arid regions. Build Environ 2011, 46:2641-2656.
9. Kültür S., Türkeri N. Assessment of long term solar reflectance performance of roof coverings measured in laboratory and in field. Build Environ 2012, 48:164-172.
10. Karlessi T., Santamouris M., Synnefa A., Assimakopoulos D., Didaskalopoulos P., Apostolakis K. Development and testing of PCM doped cool colored coatings to mitigate urban heat island and cool buildings. Build Environ 2011, 46:570-576.
11. Jo J.H., Carlson J.D., Golden J.S., Bryan H. An integrated empirical and modeling methodology for analyzing solar reflective roof technologies on commercial buildings. Build Environ 2010, 45:453-460.
12. Wanphen S., Nagano K. Experimental study of the performance of porous materials to moderate the roof surface temperature by its evaporative cooling effect. Build Environ 2009, 44:338-351.
13. Asaeda T., Ca V.T. Characteristics of permeable pavement during hot summer weather and impact on the thermal environment. Build Environ 2000, 35:363-375.
14. Scholz M., Grabowiecki P. Review of permeable pavement systems. Build Environ 2007, 42:3830-3836.
15. Tan Siew A., Fwa Tien F. Pavement evaluation for thermal/glare comfort during footdrills. Build Environ 1997, 32:257-269.
16. Tan S.-A., Fwa T.-F. Influence of pavement materials on the thermal environment of outdoor spaces. Build Environ 1992, 27:289-295.
17. Starke P., Wallmeyer C., Rölver S., Göbel P., Coldewey W.G. Development of a new laboratory evaporation measurement device as decision support for evaporation-optimized building. Build Environ 2011, 46:2552-2561.
18. Wong N.H., Kwang Tan A.Y., Chen Y., Sekar K., Tan P.Y., Chan D., et al. Thermal evaluation of vertical greenery systems for building walls. Build Environ 2010, 45:663-672.
19. Wang D.C., Wang L.C., Cheng K.Y., Lin J. Benefit analysis of permeable pavement on sidewalks. Int J Pavement Res Technol 2010, 3:207-215.
20. Yamagata H., Nasu M., Yoshizawa M., Miyamoto A., Minamiyama M. Heat island mitigation using water retentive pavement sprinkled with reclaimed wastewater. Water Sci Technol 2008, 57:763-771.
21. Mrawira D.M., Luca J. Thermal properties and transient temperature response of full-depth asphalt pavements. Des Rehabil Pavements 2002, 2002:160-171.
22. Schindler A.K., Ruiz J.M., Rasmussen R.O., Chang G.K., Wathne L.G. Concrete pavement temperature prediction FHWA HIPERPAV and case studies with the models. Cement Concr Compos 2004, 26:463-471.
23. Hermansson A. Mathematical model for calculation of pavement temperatures - comparison of calculated and measured temperatures. Assess Evaluat Pavements 2001, 180-188.
24. Li H, Harvey J. Numerical simulation and sensitivity analysis of asphalt pavement temperature and near-surface air temperature using integrated local modeling (11-3125). In: Transportation Research Board 90th annual meeting. Washington, D.C., 2011.
25. Hermansson A. Simulation model for calculating pavement temperatures including maximum temperature. Pavement Manag Monit 2000, 134-141.
26. Gui J., Phelan P.E., Kaloush K.E., Golden J.S. Impact of pavement thermophysical properties on surface temperatures. J Mater Civil Eng 2007, 19:683-690.
27. Tapkin S. The effect of polypropylene fibers on asphalt performance. Build Environ 2008, 43:1065-1071.
28. Ibrahim H., Wahhab A.-A., Hasnain J. Laboratory study of asphalt concrete durability in Jeddah. Build Environ 1998, 33:219-230.
29. Abo-Qudais S., Al-Shweily H. Effect of antistripping additives on environmental damage of bituminous mixtures. Build Environ 2007, 42:2929-2938.
30. Roy S.K., Poh K.B., Northwood Do Durability of concrete - accelerated carbonation and weathering studies. Build Environ 1999, 34:597-606.
31. Ramadhan R.H., Al-Abdul Wahhab H.I. Temperature variation of flexible and rigid pavements in eastern Saudi Arabia. Build Environ 1997, 32:367-373.
32. Carlson J.D., Bhardwaj R., Phelan P.E., Kaloush K.E., Golden J.S. Determining thermal conductivity of paving materials using cylindrical sample geometry. J Mater Civil Eng 2010, 22:186-195.
33. Mrawira D.M., Luca J. Effect of aggregate type, gradation, and compaction level on thermal properties of hot-mix asphalts. Can J Civil Eng 2006, 33:1410-1417.
34. Luca J., Mrawira D. New measurement of thermal properties of superpave asphalt concrete. J Mater Civil Eng 2005, 17:72-79.
35. Xu Q.W., Solaimanian M. Modeling temperature distribution and thermal property of asphalt concrete for laboratory testing applications. Construct Building Mater 2010, 24:487-497.
36. Nguyen Q.T., Di Benedetto H., Sauzéat C. Determination of thermal properties of asphalt mixtures as another output from cyclic tension-compression test. Road Mater Pavement Des 2012, 13:85-103.
37. Wolfe R.K., Heath G.L., Colony D.C. University of Toledo time temperature model laboratory and field validation 1980, Rep. no. FHWA/OH-80/006, Dept. of Industrial Engineering, Univ. of Toledo, Toledo, Ohio.
38. Highter W.H., Wall D.J. Thermal properties of some asphaltic concrete mixes. Transport Res Board 1984, 38-45.
39. Tan S.A., Fwa T.F., Chuai C.T., Low B.H. Determination of thermal properties of pavement materials and unbound aggregates by transient heat conduction. J Test Eval 1997, 25:15-22.
40. Solaimanian M., Bolzan P. Analysis of the integrated model of climatic effects on pavements 1993, Strategic Highway research program, U.S. Federal Highway Administration, Research Rep., Washington, D.C.
41. Nellis G., Klein S.A. Heat transfer 2009, Ebrary Inc., Cambridge University Press, Cambridge, New York, p. xxxvii, 1107 pp.
42. Annaratone D. Engineering heat transfer 2010, Springer, Heidelberg.
43. Arpaci V.S., Kao S.-H., Selamet A. Introduction to heat transfer 1999, Prentice Hall, Upper Saddle River, NJ.
44. Rathore M.M., Kapuno R.R. Engineering heat transfer 2011, Jones & Bartlett Learning, Sudbury, Mass.
45. Bejan A. Convection heat transfer 2004, Wiley, Hoboken, NJ.
46. Wang Z.H., Tan K.H. Temperature prediction for multi-dimensional domains in standard fire. Commun Numer Meth Eng 2007, 23:1035-1055.
47. Wang Z.H., Tan K.H. Temperature prediction of concrete-filled rectangular hollow sections in fire using Green's function method. J Eng Mech 2007, 133:688-700.
48. Epperson J.F. An introduction to numerical methods and analysis 2007, Wiley-Interscience, Hoboken, NJ.
49. Sauer T. Numerical analysis 2012, Pearson, Boston.
50. Kyurkchiev N.V. Initial approximations and root finding methods 1998, Wiley-VCH, Berlin, New York.
51. Wang Z.H., Tan K.H. Temperature prediction for contour-insulated concrete-filled CHS subjected to fire using large time Green's function solutions. J Construct Steel Res 2007, 63:997-1007.
52. Wang Z.H., Tan K.H. Green's function solution for transient heat conduction in concrete-filled CHS subjected to fire. Eng Struct 2006, 28:1574-1585.