Determination of mechanical properties by nanoindentation independently of indentation depth measurement

Journal of Materials Research

Volumn 27, Issue 19, 2012, Pages 2551-2560

  Guillonneau, Gaylord ^a   Kermouche, Guillaume ^b   Bec, Sandrine ^a   Loubet, Jean Luc ^a  

^a LABORATOIRE DE TRIBOLOGIE ET DYNAMIQUE DES SYSTÈMES   (France)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

calcite; dynamic measurement; elastic modulus; hardness; indentation depth; nano indentation; second harmonic

Indexed keywords

CONTACT RADIUS; DYNAMIC MEASUREMENT; HOMOGENEOUS MATERIALS; INDENTATION DEPTH; INDENTATION SIZE EFFECTS; MEASUREMENT TECHNIQUES; SECOND HARMONICS; YOUNG MODULUS;

CALCITE; ELASTIC MODULI; ESTERS; HARDNESS;

NANOINDENTATION;

EID: 84870274567     PISSN: 08842914     EISSN: 20445326     Source Type: Journal    
DOI: 10.1557/jmr.2012.261     Document Type: Article

References (24)

1. D. Tabor: The Hardness of Metals (Oxford University Press, Oxford, UK, 2000).
2. D. Tabor: The hardness of solids. Rev. Phys. Technol. 1, 145-179 (1970).
3. S.I. Bulychev, V.P. Alekhin, M.K. Shorshorov, A.P. Ternovskii, and G.D. Shnyrev: Determining Young modulus from the indenter penetration diagram. Ind. Lab. 41, 1409-1412 (1975). (English translation of Zavodskaya Laboratoriya).
4. J.L. Loubet, M. Bauer, A. Tonck, S. Bec, and B. Gauthier-Manuel: Nano-indentation with a surface force apparatus. In Mechanical Properties and Deformation of Materials Having Ultra-Fine Microstructure. (NATO ASI Series-Series E : Applied Sciences, vol. 233, Dordrecht, Netherlands, 1993); pp. 72-89.
5. J.L. Loubet, J.M. Georges, and G. Meille: Vickers Indentation Curves of Elastoplastic Materials. Microindentation Techniques in Materials Science and Engineering (American Society for Testing and Materials, Philadelphia, PA, 1986); pp. 72-89.
6. W.C. Oliver andG.M. Pharr:An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564-1583 (1992).
7. G.M. Pharr and A. Bolshakov: Understanding nanoindentation unloading curves. J. Mater. Res. 17, 2660-2671 (2002). (Pubitemid 35296291)
8. W.C. Oliver and G.M. Pharr: Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mater. Res. 19, 3-20 (2004).
9. M.F. Doerner and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601-609 (1986).
10. J.B. Pethica, R. Hutchings, and W.C. Oliver: Hardness measurement at penetration depths as small as 20-nm. Philos. Mag. A 48, 593-606 (1983). (Pubitemid 14471725)
11. S.A.S. Asif,K.J.Wahl, and R.J. Colton: Nanoindentation and contact stiffnessmeasurement using force modulation with a capacitive loaddisplacement transducer. Rev. Sci. Instrum. 70, 2408-2413 (1999). (Pubitemid 129582717)
12. G. Guillonneau, G. Kermouche, S. Bec, and J-L. Loubet: Extraction of mechanical properties with second harmonic detection for dynamic nanoindentation testing. Exp. Mech. 52, 933-944 (2012).
13. I.N. Sneddon: The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47-57 (1965).
14. B.N. Lucas, W.C. Oliver, G.M. Pharr, and J-L. Loubet: Time dependent deformation during indentation testing, in Thin Films: Stresses and Mechanical Properties VI, edited by W.W. Gerberich, H. Gao, J-E. Sundgren, and S.P. Baker (Mater. Res. Soc. Symp. Proc. 436, Pittsburgh, PA, 1997); p. 233.
15. A.C. Fischer-Cripps: Nanoindentation (Springer-Verlag New York Inc., New York, NY, 2002).
16. R.B. King: Elastic analysis of some punch problems for a layered medium. Int. J. Solids Struct. 23, 1657-1664 (1987). (Pubitemid 18546650)
17. S. Bec, A. Tonck, J-M. Georges, E. Georges, and J.-L. Loubet: Improvements in the indentation method with a surface force apparatus. Philos. Mag. A 74, 1061 (1996).
18. G. Hochstetter, A. Jimenez, and J.L. Loubet: Strain-rate effects on hardness of glassy polymers in the nanoscale range. Comparison between quasi-static and continuous stiffness measurements. J. Macromol. Sci. Part B Phys. 38, 681 (1999).
19. G.M. Pharr, W.C. Oliver, and F.R. Brotzen: On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. J. Mater. Res. 7, 613-617 (1992).
20. S. Zügner, K. Marquardt, and I. Zimmermann: Influence of nanomechanical crystal properties on the comminution process of particulate solids in spiral jet mills. Eur. J. Pharm. Biopharm. 62, 194-201 (2006). (Pubitemid 43143272)
21. G.M. Pharr, J.H. Strader, and W.C. Oliver: Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement. J. Mater. Res. 24, 653-666 (2009).
22. M. Broz, R. Cook, and D. Whitney: Microhardness, toughness, and modulus of Mohs scale minerals. Am. Mineral. 91, 135-142 (2006).
23. D.L. Whitney, M. Broz, and R.F. Cook: Hardness, toughness, and modulus of some common metamorphic minerals. Am. Mineral. 92, 281-288 (2007). (Pubitemid 46416355)
24. C.A. Schuh, C.E. Packard, and A.C. Lund: Nanoindentation and contact-mode imaging at high temperatures. J. Mater. Res. 3, 725-736 (2006).