Water-blown rigid biofoams from soy-based biopolyurethane and microcrystalline cellulose

JAOCS, Journal of the American Oil Chemists' Society

Volumn 89, Issue 11, 2012, Pages 2057-2065

  Luo, Xiaogang ^a,b   Mohanty, Amar ^a,c   Misra, Manju ^a,c  

^a UNIVERSITY OF GUELPH   (Canada)

^b WUHAN INSTITUTE OF TECHNOLOGY   (China)

^c UNIVERSITY OF GUELPH   (Canada)

Author keywords

Microcrystalline cellulose; Poly(diphenylmethane diisocyanate); Polyurethane biofoam; Soybean phosphate ester polyol

Indexed keywords

CELL MORPHOLOGY; CHARACTERISTIC PEAKS; COMPRESSIVE MODULI; FLEXURAL MODULUS; FT-IR STUDY; MICROCRYSTALLINE CELLULOSE; PETROCHEMICAL POLYOL; PHOSPHATE ESTERS; POLY(DIPHENYLMETHANE DIISOCYANATE); SCANNING ELECTRON MICROSCOPE; SIMPLE METHOD;

BLOWING AGENTS; CRYSTALLINE MATERIALS; MECHANICAL PROPERTIES; OILSEEDS; PETROLEUM RESEARCH; PHOTOGRAPHY; POLYURETHANES; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS;

ALCOHOLS;

GLYCINE MAX;

EID: 84870058177     PISSN: 0003021X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11746-012-2100-4     Document Type: Article

References (31)

1. Bonderer LJ, Feldman K, Gauckler LJ (2010) Platelet-reinforced polymer matrix composites by combined gel-casting and hotpressing. Part II: thermoplastic polyurethane matrix composites. Compos Sci Technol 70:1966-1972
2. Fernández-d'Arlas B, Khan U, Rueda L, Coleman JN, Mondragon I, Corcuera MA, Eceiza A (2011) Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites. Compos Sci Technol 71:1030-1038
3. Özgür Seydibeyoglu M, Oksman K (2008) Novel nanocomposites based on polyurethane and micro fibrillated cellulose. Compos Sci Technol 68:908-914
4. Narine S, Kong X, Bouzidi L, Sporns P (2007) Physical properties of polyurethanes produced from polyols from seed oils: I. Elastomers. J Am Oil Chem Soc 84:55-63
5. Narine S, Kong X, Bouzidi L, Sporns P (2007) Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: II. Foams. J Am Oil Chem Soc 84:65-72
6. Trovatti E, Oliveira L, Freire CSR, Silvestre AJD, Pascoal Neto C, Cruz Pinto JJC, Gandini A (2010) Novel bacterial celluloseacrylic resin nanocomposites. Compos Sci Technol 70:1148-1153
7. Matadi R, Hablot E, Wang K, Bahlouli N, Ahzi S, Avérous L (2011) High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres. Compos Sci Technol 71:674-682
8. Raquez JM, Deléglise M, Lacrampe MF, Krawczak P (2010) Thermosetting (bio) materials derived from renewable resources: a critical review. Prog Polym Sci 35:487-509
9. Ionescu M (2005) Chemistry and technology of polyols for polyurethanes. Smithers Rapra Technology, Rapra Technology, Ltd., UK
10. Campanella A, Bonnaillie LM, Wool RP (2009) Polyurethane foams from soyoil-based polyols. J Appl Polym Sci 112:2567-2578
11. Dwan'Isa JPL, Mohanty AK, Misra M, Drzal LT, Kazemizadeh M (2003) Novel biobased polyurethanes synthesized from soybean phosphate ester polyols: thermomechanical properties evaluations. J Polym Environ 11:161-168
12. Xu Z, Tang X, Gu A, Fang Z (2007) Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites. J Appl Polym Sci 106:439-447
13. Silva MC, Takahashi JA, Chaussy D, Belgacem MN, Silva GG (2010) Composites of rigid polyurethane foam and cellulose fiber residue. J Appl Polym Sci 117:3665-3672
14. Luo X, Zhang L (2010) New solvents and functional materials prepared from cellulose solutions in alkali/urea aqueous system. Food Res Int. doi:10.1016/j.foodres.2010.05.016
15. Adel AM, Abd El-Wahab ZH, Ibrahim AA, Al-Shemy MT (2011) Characterization of microcrystalline cellulose prepared from lignocellulosic materials. Part II: physicochemical properties. Carbohydr Polym 83:676-687
16. Bilbao-Sáinz C, Avena-Bustillos RJ, Wood DF, Williams TG, McHugh TH (2010) Composite edible films based on hydroxypropyl methylcellulose reinforced with microcrystalline cellulose nanoparticles. J Agric Food Chem 58:3753-3760
17. Kiziltas A, Gardner D, Han Y, Yang H-S (2010) Determining the mechanical properties of microcrystalline cellulose (MCC)-filled PET-PTT blend composites. Wood Fiber Sci 42:165-176
18. Suryanegara L, Nakagaito A, Yano H (2010) Thermo-mechanical properties of microfibrillated cellulose-reinforced partially crystallized PLA composites. Cellulose 17:771-778
19. Wu Q, Henriksson M, Liu X, Berglund LA (2007) A high strength nanocomposite based on microcrystalline cellulose and polyurethane. Biomacromolecules 8:3687-3692
20. Latere Dwan'isa JP, Mohanty AK, Misra M, Drzal LT, Kazemizadeh M (2004) Biobased polyurethane and its composite with glass fiber. J Mater Sci 39:2081-2087
21. Dolomanova V, Rauhe JC (2011) Mechanical properties and morphology of nano-reinforced rigid PU foam. J Cell Plast 47:81
22. Banik I, Sain MM (2008) Role of refined paper fiber on structure of water blown soy polyol based polyurethane foams. J Reinf Plast Compos 27:1515-1524
23. Cao X, Dong H, Li CM (2007) New nanocomposite materials reinforced with flax cellulose nanocrystals in waterborne polyurethane. Biomacromolecules 8:899-904
24. Szycher M (1999) Handbook of polyurethanes. CardioTech International, Woburn
25. Yeung P, Broutman LJ (1977) In: Proceedings of SPI. 32nd Annual Technical Conference, Rein forced Plastics Division, Section 9-B
26. Bledzki AK, Zhang W, Chate A (2001) Natural-fibre-reinforced polyurethane microfoams. Compos Sci Technol 61:2405-2411
27. Gedde U (1995) Polymer Physics, chap 8. Chapman and Hall, London
28. Wirpsza Z, Kemp TJ, Skup A (1993) Polyurethanes: chemistry, technology and applications. Ellis Horwood, Chichester
29. Bandyopadhyay-Ghosh S, Ghosh S, Sain M (2010) Synthesis of Soy-Polyol by two step continuous route and development of soybased polyurethane foam. J Polym Environ 18:437-442
30. Yang WP, Macosko CW, Wellinghoff ST (1986) Thermal degradation of urethanes based on 4, 40-diphenylmethane diisocyanate and 1, 4-butanediol (MDI/BDO). Polymer 27:1235-1240
31. Guo A, Javni I, Petrovic Z (2000) Rigid polyurethane foams based on soybean oil. J Appl Polym Sci 77:467-473