An analytical elastic-plastic contact model

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011

Volumn 7, Issue PARTS A AND B, 2011, Pages 685-695

  Brake, M R ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

UNLOADING;

COEFFICIENT OF RESTITUTION; CONSERVATION OF VOLUME; ELASTIC -PLASTIC MODELS; ELASTIC-PLASTIC BEHAVIOR; ELASTIC-PLASTIC CONTACT; ELASTIC-PLASTIC DEFORMATION; FORCE-DISPLACEMENT RELATIONSHIPS; VON MISES YIELD CRITERION;

ELASTOPLASTICITY;

EID: 84869170298     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/imece2011-62436     Document Type: Conference Paper

References (44)

1. Hertz, H., 1882. "Über die berührung fester elastischer körper (On the contact of elastic solids)". Journal fur die Reine und Andgewandte Mathematik, 92, pp. 156-171.
2. Tabor, D., 1996. "Indentation hardness: Fifty years on - a personal view". Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 74, pp. 1207-1212.
3. Schwager, T., and Pöschel, T., 1998. "Coefficient of normal restitution of visous particles and cooling rate of granular gases". Physical Review E, 57, pp. 650-654.
4. Ramírez, R., Pöschel, T., Brilliantov, N. V., and Schwager, T., 1999. "Coefficient of restitution of colliding viscoelastic spheres". Physical Review E, 60, pp. 4465-4472.
5. Hill, R., 1950. The Mathematical Theory of Plasticity. Oxford University Press, New York.
6. Tabor, D., 1948. "A simple theory of static and dynamic hardness". Proceedings of the Royal Society of London, Series A, 192, pp. 247-274.
7. Hardy, C., Baronet, C. N., and Tordion, G. V., 1971. "The elasto-plastic indentation of a half-space by a rigid sphere". International Journal for Numerical Methods in Engineering, 3, pp. 451-462.
8. Lee, C. H., Masaki, S., and Kobayashi, S., 1972. "Analysis of ball indentation". International Journal of Mechanical Sciences, 14, pp. 417-426.
9. Biwa, S., and Storakers, B., 1995. "An analysis of fully plastic brinell indentation". Journal of the Mechanics and Physics of Solids, 43, pp. 1303-1333.
10. Follansbee, P. S., and Sinclair, G. B., 1984. "Quasi-static normal indentation of an elasto-plastic half-space by a rigid sphere - i analysis". International Journal of Solids and Structures, 20, pp. 81-91.
11. Sinclair, G. B., Follansbee, P. S., and Johnson, K. L., 1985. "Quasi-static normal indentation of an elasto-plastic halfspace by a rigid sphere - ii results". International Journal of Solids and Structures, 21, pp. 865-888.
12. Jackson, R. L., and Green, I., 2005. "A finite element study of elasto-plastic hemispherical contact against a rigid flat". ASME Journal of Tribology, 127, pp. 343-354.
13. Johnson, K. L., 1970. "The correlation of indentation experiments". Journal of the Mechanics and Physics of Solids, 18, pp. 115-126.
14. Stronge, W. J., 2000. Impacts in Mechanical Systems: Analysis and Modelling, Vol. 551. Springer, ch. Contact Problems for Elasto-Plastic Impact in Multi-Body Systems, pp. 189-234.
15. Johnson, K. L., 1985. Contact Mechanics. Cambridge University Press, Cambridge.
16. Lim, Y. Y., and Chaudhri, M. M., 1999. "The effect of the indenter load on the nanohardness of ductile metals: An experimental study on polycrystalline work-hardened and annealed oxygen-free copper". Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 79, pp. 2979-3000.
17. Alcalá, J., and de los Ojos, D. E., 2010. "Reassessing spherical indentation: Contact regimes and mechanical property extraction". International Journal of Solids and Structures, 47, pp. 2714-2732.
18. Abbott, E. J., and Firestone, F. A., 1933. "Specifying surface quality: A method based on accurate measurement and comparison". Mechanical Engineering, 55, pp. 569-572.
19. Greenwood, J. A., and Williamson, J. B. P., 1966. "Contact of nominally flat surfaces". Proceedings of the Royal Society of London, Series A, 295, pp. 300-319.
20. Chang, W. R., Etsion, I., and Bogy, D. B., 1987. "An elastic-plastic model for the contact of rough surfaces". ASME Journal of Tribology, 109, pp. 257-263.
21. Zhao, Y., Maietta, D. M., and Chang, L., 2000. "An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow". ASME Journal of Tribology, 122, pp. 86-93.
22. Kogut, L., and Etsion, I., 2002. "Elastic-plastic contact analysis of a sphere and a rigid flat". ASME Journal of Applied Mechanics, 69, pp. 657-662.
23. Lin, L. P., and Lin, J. F., 2006. "A new method for elastic-plastic contact analysis of a deformable sphere and a rigid flat". ASME Journal of Tribology, 128, pp. 221-229.
24. Jamari, J., and Schipper, D. J., 2006. "An elastic-plastic contact model of ellipsoid bodies". Tribology Letters, 21, pp. 262-271.
25. Horng, J. H., 1998. "An elliptic-elastic-plastic asperity microcontact model for rough surfaces". ASME Journal of Tribology, 120, pp. 82-88.
26. Jeng, Y.-R., and Wang, P.-Y., 2003. "An elliptical microcontact model considering elastic, elastoplastic, and plastic deformation". ASME Journal of Tribology, 125, pp. 232-240.
27. Jamari, J., and Schipper, D. J., 2006. "Experimental investigation of fully plastic contact of a sphere against a hard flat". ASME Journal of Tribology, 128, pp. 230-235.
28. Jackson, R. L., and Green, I., 2006. "A statistical model of elasto-plastic asperity contact between rough surfaces". Tribology International, 39, pp. 906-914.
29. Yan, S. L., and Li, L. Y., 2003. "Finite element analysis of cyclic indentation of an elastic-perfectly plastic half-space by a rigid sphere". Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 217, pp. 505-514.
30. Etsion, I., Kligerman, Y., and Kadin, Y., 2005. "Unloading of an elastic-plastic loaded spherical contact". International Journal of Solids and Structures, 42, pp. 3716-3729.
31. Jackson, R. L., Chusoipin, I., and Green, I., 2005. "A finite element study of the residual stress and deformation in hemispherical contacts". ASME Journal of Tribology, 127, pp. 484-493.
32. Thornton, C., 1997. "Coefficient of restitution for collinear collisions of elastic-perfectly plastic spheres". ASME Journal of Applied Mechanics, 64, pp. 383-386.
33. Du, Y., and Wang, S., 2009. "Energy dissipation in normal elastoplastic impact between two spheres". ASME Journal of Applied Mechanics, 76, pp. 061010-1-8.
34. Vu-Quoc, L., and Zhang, X., 1999. "An elasto-plastic contact force-displacement model in the normal direction: Displacement-driven version". Proceedings of the Royal Society of London, Series A, 455, pp. 4013-4044.
35. Vu-Quoc, L., Zhang, X., and Lesburg, L., 2000. "A normal force-displacement model for contacting spheres accounting for plastic deformation: Force-driven formulation". ASME Journal of Applied Mechanics, 67, pp. 363-371.
36. Wu, C.-Y., Thornton, C., and Li, L.-Y., 2010. "A semi-analytical model for oblique impacts of elastoplastic spheres". Proceedings of the Royal Society of London, Series A, 465, pp. 937-960.
37. Chang, L., and Zhang, H., 2007. "A mathematical model for frictional elastic-plastic sphere-on-flat contacts at sliding incipient". ASME Journal of Applied Mechanics, 74, pp. 100-106.
38. Jackson, R. L., Green, I., and Marghitu, D. B., 2010. "Predicting the coefficient of restitution of impacting elastic-perfectly plastic spheres". Nonlinear Dynamics, 60, pp. 217-229.
39. Tatara, Y., 1989. "Extensive theory of force-approach relations of elastic spheres in compression and in impact". ASME Journal of Engineering Materials and Technology, 111, pp. 163-168.
40. Minamoto, H., and Kawamura, S., 2009. "Effects of material strain rate sensitivity in low speed impact between two identical spheres". International Journal of Impact Engineering, 36, pp. 680-686.
41. Minamoto, H., and Kawamura, S., 2011. "Moderately high speed impact of two identical spheres". International Journal of Impact Engineering, 38, pp. 123-129.
42. Tatara, Y., and Moriwaki, N., 1982. "Study on impact of equivalent two bodies (coefficients of restitution of spheres of brass, lead, glass, porcelain and agate, and the material properties)". Bulletin of the JSME, 25, pp. 631-637.
43. Zhang, X., and Vu-Quoc, L., 2002. "Modeling the dependence of the coefficient of restitution on the impact velocity in elasto-plastic collisions". International Journal of Impact Engineering, 27, pp. 317-341.
44. Kharaz, A. H., and Gorham, D. A., 2000. "A study of the restitution coefficient in elastic-plastic impact". Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 80, pp. 549-559.