Effect of various pore formers on the microstructural development of tape-cast porous ceramics

Ceramics International

Volumn 39, Issue 1, 2013, Pages 403-413

  Sarikaya, Ayhan ^a   Dogan, Fatih ^a  

^a University of Missouri Rolla   (United States)

Author keywords

A. Tape casting; B. Porosity; E. Fuel cells; Pore former

Indexed keywords

CONTROLLED POROSITY; E. FUEL CELLS; LASER DIFFRACTIONS; MACROSCOPIC DEFECTS; MERCURY INTRUSION POROSIMETRY; MICROSTRUCTURAL DEVELOPMENT; MORPHOLOGICAL FEATURES; PORE FORMERS; PORE FORMING; POROUS CERAMICS; PROCESSING PARAMETERS; RHEOLOGICAL PROPERTY; SURFACE AREA MEASUREMENT; TAPE CASTING; VOLUMETRIC LOADING; WARPAGES;

CRACKS; DIFFERENTIAL THERMAL ANALYSIS; MERCURY (METAL); POLYMETHYL METHACRYLATES; POLYSTYRENES; SCANNING ELECTRON MICROSCOPY; SINTERING; SUGAR (SUCROSE); THERMOGRAVIMETRIC ANALYSIS;

CERAMIC MATERIALS;

EID: 84869091976     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2012.06.041     Document Type: Article

References (56)

1. T. Tsuru Inorganic porous membranes for liquid phase separation Separation & Purification Reviews 30 2001 191 220
2. J. She, T. Ohji, and Z.-Y. Deng Thermal shock behavior of porous silicon carbide ceramics Journal of the American Ceramic Society 85 2002 2125 2127
3. M.L. Dunn, and M. Taya Electromechanical properties of porous piezoelectric ceramics Journal of the American Ceramic Society 76 1993 1697 1706
4. C.P. Shaw, R.W. Whatmore, and J.R. Alcock Porous, functionally gradient pyroelectric materials Journal of the American Ceramic Society 90 2007 137 142
5. L. Yin, H.X. Peng, L. Yang, and B. Su Fabrication of three-dimensional inter-connective porous ceramics via ceramic green machining and bonding Journal of the European Ceramic Society 28 2008 531 537
6. A.R. Walpole, Z. Xia, C.W. Wilson, J.T. Triffitt, and P.R. Wilshaw A novel nano-porous alumina biomaterial with potential for loading with bioactive materials Journal of Biomedical Materials Research Part A 90 2009 46 54
7. X. Huang Separator technologies for lithium-ion batteries Journal of Solid State Electrochemistry 15 2011 649 672
8. S.F. Cobin, and P.S. Apté Engineered porosity via tape casting, lamination and the percolation of pyrolyzable particulates Journal of the American Ceramic Society 82 1999 1693 1701
9. G.T. Chandrappa, N. Steunou, and J. Livage Macroporous crystalline vanadium oxide foam Nature 416 2002 702
10. Z. Zivcová, E. Gregorová, and W. Pabst Low- and high-temperature processes and mechanisms in the preparation of porous ceramics via starch consolidation casting Starch/Stärke 62 2010 3 10
11. J.R. Wilson, and S.A. Barnett Solid oxide fuel cell Ni-YSZ anodes: effect of composition on microstructure and performance Electrochemical and Solid-State Letters 11 2008 B181 B185
12. D. Simwonis, F. Tietz, and D. Stöver Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells Solid State Ionics 132 2000 241 251
13. A. Sarikaya, V. Petrovsky, F. Dogan, Effect of the anode microstructure on the enhanced performance of solid oxide fuel cells, International Journal of Hydrogen Energy, doi: 10.1016/j.ijhydene.2012.05.007, in press.
14. D. Chen, B. Zhang, H. Zhuang, and W. Li Combustion synthesis of network silicon nitride porous ceramics Ceramics International 28 2003 363 364
15. K. Maca, P. Dobsak, and A.R. Boccaccini Fabrication of graded porous ceramics using alumina-carbon powder mixtures Ceramics International 27 2001 577 584
16. X. Mao, S. Wang, and S. Shimai Porous ceramics with tri-modal pores prepared by foaming and starch consolidation Ceramics International 34 2008 107 112
17. J.-M. Qian, Z.-H. Jin, and X.W. Wang Porous SiC ceramics fabricated by reactive infiltration of gaseous silicon into charcoal Ceramics International 30 2004 947 951
18. T. Fukasawa, M. Ando, T. Ohji, and S. Kanzaki Synthesis of porous ceramics with complex pore structure by freeze-dry processing Journal of the American Ceramic Society 84 2001 230 232
19. Y.-W. Kim, S.-H. Kim, C. Wang, and C.B. Park Fabrication of microcellular ceramics using gaseous carbon dioxide Journal of the American Ceramic Society 86 2003 2231 2233
20. A. Nakahira, F. Nishimura, S. Kato, M. Iwata, and S. Takeda Green fabrication of porous ceramics using an aqueous electrophoretic deposition process Journal of the American Ceramic Society 86 2003 1230 1232
21. Y. Gu, X. Liu, G. Meng, and D. Peng Porous YSZ ceramics by water-based gelcasting Ceramics International 25 1999 705 709
22. A. Mortensen, and S. Suresh Functionally graded metals and metal-ceramic composites: part 1 - processing International Materials Reviews 40 1995 239 265
23. J.F. Yang, G.J. Zhang, and T. Ohji Porosity and microstructure control of porous ceramics by partial hot pressing Journal of Materials Research 16 2001 1916 1918
24. S. Zhu, S. Ding, H. Xi, Q. Li, and R. Wang Preparation and characterization of SiC/cordierite composite porous ceramics Ceramics International 33 2007 115 118
25. L. Hu, C.-A. Wang, and Y. Huang Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity Journal of Materials Science 45 2010 3242 3246
26. H.L. Zhang, J.-F. Li, and B.-P. Zhang Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents Acta Materialia 55 2007 171 181
27. S.F. Corbin, J. Lee, and X. Qiao Influence of green formulation and pyrolyzable particulates on the porous microstructure and sintering characteristics of tape cast ceramics Journal of the American Ceramic Society 84 2001 41 47
28. M. Boaro, J.M. Vohs, and R.J. Goerte Synthesis of highly porous yttria-stabilized zirconia by tape-casting methods Journal of the American Ceramic Society 86 2003 395 400
29. J.-H. Lee, J.-W. Heo, D.-S. Lee, J. Kim, G.-H. Kim, H.-W. Lee, H.S. Song, and H.-H. Moon The impact of anode microstructure on the power generating characteristics of SOFC Solid State Ionics 158 2003 225 232
30. A. Buyukaksoy, V. Petrovsky, and F. Dogan Stability and performance of solid oxide fuel cells with nanocomposite electrodes Journal of the Electrochemical Society 159 2012 B666 B669
31. J.M. Vohs, and R.J. Gorte High-performance SOFC cathodes prepared by infiltration Advanced Materials 21 2009 943 956
32. 2 composite cathodes fabricated by an infiltration method Journal of the Electrochemical Society 153 2006 A515 A520
33. A. Sanson, P. Pinasco, and E. Roncari Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs Journal of the European Ceramic Society 28 2008 1221 1226
34. J.H. Choi, T. Lee, T.-S. Park, K.-B. Yoo, and Y.-S. Yoo Microstructure and performance of anode supported cell by pore size of anode J. Weidner, S.R. Narayanan, Battery and Energy Technology (General) - 214th ECS Meeting/PRIME 2008, ECS Transactions vol. 16 2009 The Electrochemical Society Pennington, NJ 37 42
35. F. Tang, H. Fudouzi, T. Uchikoshi, and Y. Sakka Preparation of porous materials with controlled pore size and porosity Journal of the European Ceramic Society 24 2004 341 344
36. C. Wang, T. Kasuga, and M. Nogami Macroporous calcium phosphate glass-ceramic prepared by two-step pressing technique and using sucrose as a pore former Journal of Materials Science: Materials in Medicine 16 2005 739 744
37. A.-M. Le Raya, H. Gautier, J.-M. Bouler, P. Weiss, and C. Merle A new technological procedure using sucrose as porogen compound to manufacture porous biphasic calcium phosphate ceramics of appropriate micro- and macrostructure Ceramics International 36 2010 93 101
38. Y. de Hazan, V. Märkl, J. Heinecke, C. Aneziris, and T. Graule Functional ceramic and nanocomposite fibers, cellular articles and microspheres via radiation curable colloidal dispersions Journal of the European Ceramic Society 31 2011 2601 2611
39. 1.9 ceramics Journal of Materials Science and Technology 26 2010 523 528
40. T. Kim, G. Liu, M. Boaro, S.-I. Lee, J.M. Vohs, R.J. Gorte, O.H. Al-Madhi, and B.O. Dabbousi A study of carbon formation and prevention in hydrocarbon-fueled SOFC Journal of Power Sources. 155 2006 231 238
41. E. Gregorová, and W. Pabst Porosity and pore size control in starch consolidation casting of oxide ceramics - achievements and problems Journal of the European Ceramic Society 27 2007 669 672
42. E. Gregorová, W. Pabst, and I. Bohačenko Characterization of different starch types for their application in ceramic processing Journal of the European Ceramic Society 26 2006 1301 1309
43. R. Barea, M.I. Osendi, P. Miranzo, and J.M.F. Ferreira Fabrication of highly porous mullite materials Journal of the American Ceramic Society 88 2005 777 779
44. T. Allen 5th edition Particle Size Measurement vols. 1-2 1997 Chapman & Hall London, UK
45. R. Xu Particle Size Characterization: Light Scattering Methods 2000 Kluwer Academic Publishers Dordrecht, Netherlands
46. J.U. Keller, and R. Staudt Gas Adsorption Equilibria: Experimental Methods and Adsorption Isotherms 2005 Springer Berlin, Germany
47. X. Xu, R. Fu, and J.M.F. Ferreira Effect of homogenizing procedures on the slip casting of reaction sialon suspensions Ceramics International 30 2004 745 749
48. 4-SiC nano-composite ceramics through temperature-induced gelation and liquid phase sintering Journal of the European Ceramic Society 3 2006 337 341
49. P. Beringer Remington: the Science and Practice of Pharmacy 21st ed. 2006 Lippincott Williams & Wilkins Philadelphia, PA, USA
50. M. Asadi Beet-sugar Handbook 2007 John Wiley & Sons, Inc. Hoboken, NJ, USA
51. N. Suppakarn, H. Ishida, and J.D. Cawley Roles of poly(propylene glycol) during solvent-based lamination of ceramic green tapes Journal of the American Ceramic Society 84 2001 289 294
52. X. Wei, and A. Atkinson Ceramic-metal interpenetrating network composites formed by electrodeposition Journal of the Electrochemical Society 152 2005 C513 C519
53. R.E. Mistler, and E.R. Twiname Tape Casting: Theory and Practice 2000 The American Ceramic Society Westerville, OH, USA
54. N. Straue, M. Rauscher, M. Dressler, and A. Roosen Tape casting of ITO green tapes for flexible electroluminescent lamp Journal of the American Ceramic Society 95 2012 684 689
55. 3 addition on the properties of reaction-bonded porous SiC ceramics Ceramics International 32 2006 461 466
56. H. Birol, T. Maeder, and P. Ryser Application of graphite-based sacricial layers for fabrication of LTCC (low temperature co-fired ceramic) membranes and micro-channels Journal of Micromechanics and Microengineering 17 2007 50 60