Influence of the initial rupture size and tendon subregion on three-dimensional biomechanical properties of single-row and double-row rotator cuff reconstructions

Knee Surgery, Sports Traumatology, Arthroscopy

Volumn 20, Issue 11, 2012, Pages 2139-2147

  Lorbach, O ^a   Pape, D ^b   Raber, F ^a   Busch, L C ^c   Kohn, D ^a   Kieb, M ^a  

^a SAARLAND UNIVERSITY   (Germany)

^b CENTRE HOSPITALIER DE LUXEMBOURG   (Luxembourg)

^c UNIVERSITY OF LÜBECK   (Germany)

Author keywords

Cyclic displacement; Double row versus single row; Rotator cuff; Shoulder; Three dimensional

Indexed keywords

ARTICLE; BIOMECHANICS; CADAVER; COMPARATIVE STUDY; HUMAN; INJURY; PATHOLOGY; RADIOSTEREOMETRIC ANALYSIS; ROTATOR CUFF; SUTURING METHOD; WEIGHT BEARING;

BIOMECHANICS; CADAVER; HUMANS; RADIOSTEREOMETRIC ANALYSIS; ROTATOR CUFF; SUTURE TECHNIQUES; WEIGHT-BEARING;

EID: 84867879167     PISSN: 09422056     EISSN: 14337347     Source Type: Journal    
DOI: 10.1007/s00167-012-1892-y     Document Type: Article

References (49)

1. Adam F, Pape D, Kohn D, Seil R (2002) Length of the patellar tendon after anterior cruciate ligament reconstruction with patellar tendon autograft: a prospective clinical study using Roentgen stereometric analysis. Arthroscopy 18: 859-864.
2. Adam F, Pape D, Schiel K et al (2004) Biomechanical properties of patellar and hamstring graft tibial fixation techniques in anterior cruciate ligament reconstruction: experimental study with roentgen stereometric analysis. Am J Sports Med 32: 71-78.
3. Barber FA, Herbert MA, Schroeder FA et al (2010) Biomechanical advantages of triple-loaded suture anchors compared with double-row rotator cuff repairs. Arthroscopy 26: 316-323.
4. Barber F, Aziz-Jacobo J, Rapley JH, et al (2010) Biomechanical advantages of triple-loaded suture anchors compared with double-row rotator cuff repairs-Author′s Reply. 26 874-876.
5. Bateman JE (1963) The diagnosis and treatment of ruptures of the rotator cuff. Surg Clin N Am 43: 1523-1530.
6. Baums MH, Spahn G, Steckel H et al (2009) Comparative evaluation of the tendon-bone interface contact pressure in different single- versus double-row suture anchor repair techniques. Knee Surg Sports Traumatol Arthrosc 17: 1466-1472.
7. Burks RT, Crim J, Brown N et al (2009) A prospective randomized clinical trial comparing arthroscopic single- and double-row rotator cuff repair: magnetic resonance imaging and early clinical evaluation. Am J Sports Med 37: 674-682.
8. Castagna A, Garofalo R, Conti M et al (2007) Arthroscopic rotator cuff repair using a triple-loaded suture anchor and a modified Mason-Allen technique (Alex stitch). Arthroscopy 23: 440-444.
9. Charousset C, Grimberg J, Duranthon LD et al (2007) Can a double-row anchorage technique improve tendon healing in arthroscopic rotator cuff repair?: a prospective, nonrandomized, comparative study of double-row and single-row anchorage techniques with computed tomographic arthrography tendon healing assessment. Am J Sports Med 35: 1247-1253.
10. Cummins CA, Strickland S, Appleyard RC et al (2003) Rotator cuff repair with bioabsorbable screws: an in vivo and ex vivo investigation. Arthroscopy 19: 239-248.
11. Dahlberg G (1940) Statistical methods for medical and biological students. Interscience, New York.
12. Franceschi F, Ruzzini L, Longo UG et al (2007) Equivalent clinical results of arthroscopic single-row and double-row suture anchor repair for rotator cuff tears: a randomized controlled trial. Am J Sports Med 35: 1254-1260.
13. Galatz LM, Ball CM, Teefey SA, et al (2004) The outcome and repair integrity of completely arthroscopically repaired large and massive rotator cuff tears. J Bone Joint Surg Am 86-A: 219-224.
14. Gates JJ, Gilliland J, McGarry MH et al (2010) Influence of distinct anatomic subregions of the supraspinatus on humeral rotation. J Orthop Res 28: 12-17.
15. Gazielly DF, Gleyze P, Montagnon C (1994) Functional and anatomical results after rotator cuff repair. Clin Orthop Relat Res 304: 43-53.
16. Gerber C, Schneeberger AG, Beck M, Schlegel U (1994) Mechanical strength of repairs of the rotator cuff. J Bone Joint Surg Br 76: 371-380.
17. Gerber C, Schneeberger AG, Perren SM, Nyffeler RW (1999) Experimental rotator cuff repair. A preliminary study. J Bone Joint Surg Am 81: 1281-1290.
18. Grasso A, Milano G, Salvatore M et al (2009) Single-row versus double-row arthroscopic rotator cuff repair: a prospective randomized clinical study. Arthroscopy 25: 4-12.
19. Harryman DT, Mack LA, Wang KY et al (1991) Repairs of the rotator cuff. Correlation of functional results with integrity of the cuff. J Bone Joint Surg Am 73: 982-989.
20. Ide J, Maeda S, Takagi K (2005) A comparison of arthroscopic and open rotator cuff repair. Arthroscopy 21: 1090-1098.
21. Karrholm J (1989) Roentgen stereophotogrammetry. Review of orthopedic applications. Acta Orthop Scand 60: 491-503.
22. Kim DH, Elattrache NS, Tibone JE et al (2006) Biomechanical comparison of a single-row versus double-row suture anchor technique for rotator cuff repair. Am J Sports Med 34: 407-414.
23. Koganti AK, Adamson GJ, Gregersen CS et al (2006) Biomechanical comparison of traditional and locked suture configurations for arthroscopic repairs of the rotator cuff. Am J Sports Med 34: 1832-1838.
24. Lorbach O, Anagnostakos K, Vees J et al (2010) Three-dimensional evaluation of the cyclic loading behavior of different rotator cuff reconstructions. Arthroscopy 26: S95-S105.
25. Lorbach O, Bachelier F, Vees J et al (2008) Cyclic loading of rotator cuff reconstructions: single-row repair with modified suture configurations versus double-row repair. Am J Sports Med 36: 1504-1510.
26. Lorbach O, Pape D, Raber F et al (2011) Arthroscopic rotator cuff repair using a single-row of triple-loaded suture anchors with a modified suture configuration. Arch Orthop Trauma Surg 131: 1073-1076.
27. Ma CB, Comerford L, Wilson J, Puttlitz CM (2006) Biomechanical evaluation of arthroscopic rotator cuff repairs: double-row compared with single-row fixation. J Bone Joint Surg Am 88: 403-410.
28. Mazzocca AD, Millett PJ, Guanche CA et al (2005) Arthroscopic single-row versus double-row suture anchor rotator cuff repair. Am J Sports Med 33: 1861-1868.
29. Meier SW, Meier JD (2006) The effect of double-row fixation on initial repair strength in rotator cuff repair: a biomechanical study. Arthroscopy 22: 1168-1173.
30. Milano G, Grasso A, Zarelli D et al (2008) Comparison between single-row and double-row rotator cuff repair: a biomechanical study. Knee Surg Sports Traumatol Arthrosc 16: 75-80.
31. Nho SJ, Yadav H, Pensak M et al (2007) Biomechanical fixation in arthroscopic rotator cuff repair. Arthroscopy 23: 94-102.
32. Nyström L (1990) Algorithms and program system for roentgen stereophotogrammetric analysis. Institute of Information and Processing, Department of Computer Science, University of Umea, Umea.
33. Park JY, Lhee SH, Choi JH et al (2008) Comparison of the clinical outcomes of single- and double-row repairs in rotator cuff tears. Am J Sports Med 36: 1310-1316.
34. Park MC, Jun BJ, Park CJ et al (2007) The biomechanical effects of dynamic external rotation on rotator cuff repair compared to testing with the humerus fixed. Am J Sports Med 35: 1931-1939.
35. Park MC, Tibone JE, Elattrache NS et al (2007) Part II: biomechanical assessment for a footprint-restoring transosseous-equivalent rotator cuff repair technique compared with a double-row repair technique. J Shoulder Elbow Surg 16: 469-476.
36. Pauly S, Kieser B, Schill A et al (2010) Biomechanical comparison of 4 double-row suture-bridging rotator cuff repair techniques using different medial-row configurations. Arthroscopy 26: 1281-1288.
37. Postel JM, Goutallier D, Lavau L, Bernageau J (1994) Anatomical results of rotator cuff repairs. Study of 57 cases controlled by arthrography. J Shoulder Elbow Surg 3: 20.
38. Ryd L (1992) Roentgen stereophotogrammetric analysis of prosthetic fixation in the hip and knee joint. Clin Orthop Relat Res 276: 56-65.
39. Sano H, Yamashita T, Wakabayashi I, Itoi E (2007) Stress distribution in the supraspinatus tendon after tendon repair: suture anchors versus transosseous suture fixation. Am J Sports Med 35: 542-546.
40. Saridakis P, Jones G (2010) Outcomes of single-row and double-row arthroscopic rotator cuff repair: a systematic review. J Bone Joint Surg Am 92: 732-742.
41. Schneeberger AG, von RA, Kalberer F, et al (2002) Mechanical strength of arthroscopic rotator cuff repair techniques: an in vitro study. J Bone Joint Surg Am 84-A: 2152-2160.
42. Selvik G (1990) Roentgen stereophotogrammetric analysis. Acta Radiol 31: 113-126.
43. Sharma P, Maffulli N (2005) Tendon injury and tendinopathy: healing and repair. J Bone Joint Surg Am 87: 187-202.
44. Shea KP, O'Keefe RM Jr, Fulkerson JP (1992) Comparison of initial pull-out strength of arthroscopic suture and staple Bankart repair techniques. Arthroscopy 8: 179-182.
45. Smith CD, Alexander S, Hill AM et al (2006) A biomechanical comparison of single and double-row fixation in arthroscopic rotator cuff repair. J Bone Joint Surg Am 88: 2425-2431.
46. Smith CK, Hull ML, Howell SM (2005) Migration of radio-opaque markers injected into tendon grafts: a study using roentgen stereophotogrammetric analysis (RSA). J Biomech Eng 127: 887-890.
47. Sugaya H, Maeda K, Matsuki K, Moriishi J (2005) Functional and structural outcome after arthroscopic full-thickness rotator cuff repair: single-row versus dual-row fixation. Arthroscopy 21: 1307-1316.
48. Wall LB, Keener JD, Brophy RH (2009) Clinical outcomes of double-row versus single-row rotator cuff repairs. Arthroscopy 25: 1312-1318.
49. Waltrip RL, Zheng N, Dugas JR, Andrews JR (2003) Rotator cuff repair. A biomechanical comparison of three techniques. Am J Sports Med 31: 493-497.