Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials

Composites Part B: Engineering

Volumn 44, Issue 1, 2013, Pages 517-523

  Seki, Yoldas ^a   Sarikanat, Mehmet ^b   Sever, Kutlay ^c   Durmuşkahya, Cenk ^d  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b EGE UNIVERSITY   (Turkey)

^c IZMIR KATIP CELEBI UNIVERSITY   (Turkey)

^d CELAL BAYAR UNIVERSITY   (Turkey)

Author keywords

A. Fibers; B. Mechanical properties; B. Thermal properties; D. Electron microscopy

Indexed keywords

ARCHIMEDES METHODS; ASH CONTENTS; CHEMICAL COMPOSITIONS; COMMUNIS PLANTS; COMPOSITES MATERIAL; CRYSTALLINITY INDEX; FOURIER TRANSFORM INFRARED; INTERFACIAL SHEAR STRENGTH; POLYESTER MATRIX; POLYMER COMPOSITE; PULL-OUT TEST; SINGLE FIBER; SURFACE FUNCTIONAL GROUPS; TENSILE TESTS; THERMAL BEHAVIORS; THERMOGRAVIMETRIC;

DIFFERENTIAL SCANNING CALORIMETRY; ETHANOL; FUNCTIONAL GROUPS; MECHANICAL PROPERTIES; PHOTOELECTRONS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; TENSILE TESTING; X RAY DIFFRACTION ANALYSIS; X RAY PHOTOELECTRON SPECTROSCOPY;

FIBERS;

EID: 84867497216     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2012.03.013     Document Type: Article

References (49)

1. H.N. Dhakal, Z.Y. Zhang, and M.O.W. Richardson Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites Compos Sci Technol 67 7-8 2007 1674 1683
2. N. Sgriccia, M.C. Hawley, and M. Misra Characterization of natural fiber surfaces and natural fiber composites Compos Part A - Appl S 39 10 2008 1632 1637
3. C. Bellmann, A. Caspari, V. Albrecht, T.T.L. Doan, E. Mader, and T. Luxbacher Electrokinetic properties of natural fibres Colloid Surface A 267 1-3 2005 19 23
4. C. Baley Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase Compos Part A - Appl S 33 7 2002 939 948
5. J. Gassan, and A.K. Bledzki Composites reinforced with cellulose based fibres Prog Polym Sci 24 2 1999 221 274
6. G. Hinrichsen, A.K. Mohanty, and M. Misra Biofibres, biodegradable polymers and biocomposites: an overview Macromol Mater Eng 276 3-4 2000 1 24
7. C. Santulli, I.M. De Rosa, J.M. Kenny, D. Puglia, and F. Sarasini Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites Compos Sci Technol 70 1 2010 116 122
8. R. Joseph, M.K. Joshy, and L. Mathew Studies on short isora fibre-reinforced polyester composites Compos Interface 13 4-6 2006 377 390
9. V. Fiore, A. Valenza, and G. Di Bella Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures Compos Sci Technol 71 8 2011 1138 1144
10. M.G. Pimenov, and M.V. Leonov The genera of umbelliferae 1993 Kew Publishing England
11. F. Maggi, C. Cecchini, A. Cresci, M.M. Coman, B. Tirillini, and G. Sagratini Chemical composition and antimicrobial activity of the essential oil from Ferula glauca L. (Ferula communis L. subsp glauca) growing in Marche (central Italy) Fitoterapia 80 1 2009 68 72
12. A. Marchi, G. Appendino, I. Pirisi, M. Ballero, and M.C. Loi Genetic differentiation of two distinct chemotypes of Ferula communis (Apiaceae) in Sardinia (Italy) Biochem Syst Ecol 31 12 2003 1397 1408
13. Keskin M, Biçer O, Gül S, Can EA. Study on Using Ferula communis (Chakshir) for oestrus synchronization in shami (damascus) goats under east-mediterranean condition of Turkey. In: 55th Annual meeting of the european association for animal production. Bled: Slovenia; 2004. p. 234.
14. L. Segal, J.J. Creely, A.E.M. Jr, and C.M. Conrad An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer Text Res J 29 1959 786 794
15. M.B. Roncero, A.L. Torres, J.F. Colom, and T. Vidal The effect of xylanase on lignocellulosic components during the bleaching of wood pulps Bioresource Technol 96 1 2005 21 30
16. D. Dai, and M. Fan Characteristic and performance of elementary hemp fibre Mater Sci Appl 1 2010 336 342
17. N. Reddy, and Y. Yang Structure and properties of high quality natural cellulose fibers from cornstalks Polymer 46 15 2005 5494 5500
18. P.J.V. Soest Use of detergents in the fibrous feeds. I. Preparation of fiber residues of low nitrogen J Assoc Off Anal Chem 46 1963 825 829
19. P.J.V. Soest, and R.H. Wine Use of detergents in the analysis of fibrous foods. IV. Determination of plant cell-wall constituents J Assoc Off Anal Chem 50 1967 50 55
20. P.J.V. Soest, and R.H. Wine Determination of lignin and cellulose in acid-detergent fiber with permanganate J Assoc Off Anal Chem 51 1968 780 785
21. E. Bozaci, K. Sever, A. Demir, Y. Seki, M. Sarikanat, and E. Ozdogan Effect of the atmospheric plasma treatment parameters on surface and mechanical properties of jute fabric Fiber Polym 10 6 2009 781 786
22. W. Liu, A.K. Mohanty, L.T. Drzal, P. Askel, and M. Misra Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites J Mater Sci 39 3 2004 1051 1054
23. Mohanty AK, Drzal LT, Askeland P, Misra M. Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites (vol 39, pg 1051, 2004). J Mater Sci. 2004;39(6):2271-.
24. A. Alemdar, and M. Sain Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties Compos Sci Technol 68 2 2008 557 565
25. S. Elanthikkal, U. Gopalakrishnapanicker, S. Varghese, and J.T. Guthrie Cellulose microfibres produced from banana plant wastes: Isolation and characterization Carbohyd Polym 80 3 2010 852 859
26. Z.T. Liu, Y.N. Yang, L.L. Zhang, Z.W. Liu, and H.P. Xiong Study on the cationic modification and dyeing of ramie fiber Cellulose 14 4 2007 337 345
27. D. Treheux, B. Kechaou, M. Salvia, B. Beaugiraud, D. Juve, and Z. Fakhfakh Mechanical and dielectric characterization of hemp fibre reinforced polypropylene (HFRPP) by dry impregnation process Express Polym Lett 4 3 2010 171 182
28. L.Y. Mwaikambo, and M.P. Ansell Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization J Appl Polym Sci 84 12 2002 2222 2234
29. L. Averous, and F. Le Digabel Properties of biocomposites based on lignocellulosic fillers Carbohyd Polym 66 4 2006 480 493
30. C.W. Yu, and H.Q. Yu Study on microbe retting of kenaf fiber Enzyme Microb Tech 40 7 2007 1806 1809
31. Seki Y, Sever K, Erden S, Sarikanat M, Neser G, Ozes C. Characterization of Luffa cylindrica fibers and the effect of water aging on the mechanical properties of its composite with polyester. J Appl Polym Sci; 2011.
32. E. Sjostrom Wood chemistry fundamentals and applications 1993 Academic Press San Diego
33. Razera IAT, Trindade WG, Leão A, Frollini E. Jute and curaua fibers as reinforcement in phenolic and lignophenolic matrix composites. In: Mattoso LHC, Leão A, Frollini E, editors. 4th International symposium on natural polymers and composites (ISNaPol 2002) proceedings. Brasil: São Pedro; 2002. p. 507-14.
34. T. Hatakeyama, K. Nakamura, and H. Hatakeyama Studies on heat-capacity of cellulose and lignin by differential scanning calorimetry Polymer 23 12 1982 1801 1804
35. A. Demir, E. Bozaci, K. Sever, Y. Seki, M. Sarikanat, and E. Ozdogan Effect of the atmospheric plasma treatment parameters on surface and mechanical properties of jute fabric Fiber Polym 10 6 2009 781 786
36. Satyanarayana KG, Guilmaraes JL, Wypych F. Studies on lignocellulosic fibers of Brazil. Part I: source, production, morphology, properties and applications. Compos Part A - Appl S. 2007; 38(7): 1694-709.
37. G.G. Silva, D.A. De Souza, J.C. Machado, and D.J. Hourston Mechanical and thermal characterization of native Brazilian coir fiber J Appl Polym Sci 76 7 2000 1197 1206
38. Toledo RDF, Ghavami K. Behaviour under indirect tension of vegetable fiber reinforced mortar composites. In: I. Third international symposium of natural polymers and composites-ISNaPol/2000 and the workshop on progress in production and processing of cellulosic fibres and natural polymers. Sao Pedro 2000. p. 399-407.
39. S.J. Eichhorn, C.A. Baillie, N. Zafeiropoulos, L.Y. Mwaikambo, M.P. Ansell, and A. Dufresne Review: current international research into cellulosic fibres and composites J Mater Sci 36 9 2001 2107 2131
40. M. Shibata, K.I. Takachiyo, K. Ozawa, R. Yosomiya, and H. Takeishi Biodegradable polyester composites reinforced with short abaca fiber J Appl Polym Sci 85 1 2002 129 138
41. F. Sarasini, I.M. De Rosa, J.M. Kenny, D. Puglia, and C. Santulli Tensile behavior of New Zealand flax (phormium tenax) fibers J Reinf Plast Comp 29 23 2010 3450 3454
42. P.J. Herrera-Franco, A. Valadez-Gonzalez, J.M. Cervantes-Uc, and R. Olayo Effect of fiber surface treatment on the fiber-matrix bond strength of natural fiber reinforced composites Compos Part B - Eng 30 3 1999 309 320
43. A.K. Mohanty, S. Mishra, L.T. Drzal, M. Misra, and G. Hinrichsen A review on pineapple leaf fibers, sisal fibers and their biocomposites Macromol Mater Eng 289 11 2004 955 974
44. D. Mohan, C.U. Pittman, and P.H. Steele Pyrolysis of wood/biomass for bio-oil: a critical review Energ Fuel 20 3 2006 848 889
45. I.S. Goldstein Organic chemicals from biomass E.J. Soltes, T.J. Elder, Pyrolysis 1981 CRC Press Boca Raton
46. J.L. Guimaraes, E. Frollini, C.G. da Silva, F. Wypych, and K.G. Satyanarayana Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil Ind Crop Prod 30 3 2009 407 415
47. M. Poletto, V. Pistor, M. Zeni, and A.J. Zattera Crystalline properties and decomposition kinetics of cellulose fibers in wood pulp obtained by two pulping processes Polym Degrad Stabil 96 4 2011 679 685
48. S.H. Aziz, and M.P. Ansell The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 1 - polyester resin matrix Compos Sci Technol 64 9 2004 1219 1230
49. P.J. Herrera-Franco, and A. Valadez-Gonzalez A study of the mechanical properties of short natural-fiber reinforced composites Compos Part B - Eng 36 8 2005 597 608