Finite element implementation of Puck's failure theory for fibre-reinforced composites under three-dimensional stress

Journal of Composite Materials

Volumn 46, Issue 19-20, 2012, Pages 2485-2513

  Matthias Deuschle, H ^a   Kröplin, Bernd H ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

Author keywords

3D stresses; finite element analysis; laminate shell; Puck's criterion; through thickness load; triaxial

Indexed keywords

3D STRESS; LAMINATE SHELLS; PUCK'S CRITERION; THROUGH-THICKNESS LOAD; TRIAXIAL;

FINITE ELEMENT METHOD; LAMINATES;

THREE DIMENSIONAL COMPUTER GRAPHICS;

EID: 84867301358     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998312451480     Document Type: Article

References (38)

1. Marsh G. Composites lift off in primary aerostructures. Reinforc Plast. 2004 ; 48: 22-27 (Pubitemid 38571360)
2. Failure criteria in fibre reinforced polymer composites: the world-wide failure exercise. Hinton MJ Kaddour AS Soden PD, ed. Amsterdam: Elsevier ; 2004 :
3. Knops M Analysis of failure in fiber polymer laminates: the theory of Alfred Puck. Berlin: Springer ; 2008 :
4. Puck A, Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol. 1998 ; 58: 1045-1067 (Pubitemid 28497257)
5. Puck A, Schürmann H. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol. 2002 ; 62: 1633-1662
6. ABAQUS V6.61 Analysis user's manual, ABAQUS Inc., Providence, RI, USA, 2006.
7. Kaddour AS, Hinton MJ. Input data for Test Cases used in benchmarking triaxial failure theories of composites. J Compos Mater. 2012 ; 46: 2293-2310
8. Coulomb CA Memoires de Mathematique et de Physique: Anné 1773. Paris, France: Academie Royal des Sciences par divers Savans ; 1776 :
9. Mohr O. Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials. Zeitschrift des VDI. 1900 ; 24: 1524-1541
10. Paul B. A modification of the Coulomb-Mohr theory of fracture. J Appl Mech. 1961 ; 28: 259-268
11. Lutz G. The Puck theory of failure in laminates in the context of the new guideline VDI2014 Part 3. In: Proceedings of Conference on Damage in Composite Materials, Stuttgart, 2006. http://www.ndt.net/v11n12.htm.
12. VDI-Gesellschaft Kunststofftechnik. Development of fibre-reinforced plastics components: analysis. VDI guideline 2014/3, Verein Deutscher Ingenieure e.V., Düsseldorf, 2006 [German and English].
13. Puck A, Kopp J, Knops M. Guidelines for the determination of the parameters in Puck's action plane strength criterion. Compos Sci Technol. 2002 ; 62 (3). 371-378 (Pubitemid 34209720)
14. Puck A. Should fibre-plastics composites be designed with strain or stress criteria. Kunststoffe. 1992 ; 82: 34-38
15. Puck A. Festigkeitsanalyse von Faser-Matrix-Laminaten: Modelle für die Praxis. München: Hanser Verlag, 1996 [German]. http://www.klub.tu- darmstadt.de/forschung/download.php.
16. Raischel F, Kun F, Hidalgo RC, et al Damage and its evolution in fiber-composite materials. Busse G Kröplin B-H Wittel FK, ed. Stuttgart: ISD Verlag ; 2006 :
17. Matthias Deuschle H, Wittel FK, Gerhard H, et al. Investigation of progressive failure in composites by combined simulated and experimental photoelasticity. Comput Mater Sci. 2006 ; 38: 1-8 (Pubitemid 44428139)
18. Correa E, París F, Mantic V. Numerical study of the inter-fibre failure under biaxial loads. Procedia Eng. 2011 ; 10: 2560-2565
19. Puck A. A failure criterion shows the direction. Kunststoffe. 1992 ; 82: 29-32
20. Fischer O. Fibre fracture behaviour in fibre reinforced plastics. PhD Thesis, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2003 [German].
21. Kopp JW. Contribution to the stress and strength analysis of unidirectionally fibre reinforced plastics. PhD Thesis, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2000 [German].
22. Mannigel M. Influence of shear stresses on the fibre failure behaviour in carbon fibre reinforced plastics (CFRP). PhD Thesis, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2007 [German].
23. Papadopoulos IV. Critical plane approaches in high-cycle fatigue: on the definition of amplitude and mean value of shear stress acting on the critical plane. Fatig Fract Eng Mater Struct. 1998 ; 21: 269-285 (Pubitemid 128498638)
24. Pagano NJ. Exact solutions for rectangular bidirectional composites and sandwich plates. J Compos Mater. 1969 ; 4: 20-34
25. Puck A, Mannigel M. Physically based nonlinear stress-strain relations for the inter-fibre fracture analysis of FRP laminates. Compos Sci Technol. 2007 ; 67: 1955-1964 (Pubitemid 46444621)
26. Puck A, Matthias Deuschle H. Application of the Puck failure theory for fibre reinforced composites under 3D-stress: comparison with experimental results. J Compos Mater. 2012 ; x: xx - xx
27. Camanho PP, Maimí P, Dávila CG. Prediction of size effects in notched laminates using continuum damage mechanics. Compos Sci Technol. 2007 ; 67: 2715-2727 (Pubitemid 47289213)
28. Hill R. Elastic properties of reinforced solids: some theoretical principles. J Mech Phys Solids. 1963 ; 11: 352-372
29. Nemat-Nasser S, Hori M Micromechanics: overall properties of heterogeneous materials. Amsterdam: North-Holland ; 1998 :
30. Wittel FK. Diskrete Elemente-Modelle zur Bestimmung der Festigkeitsevolution in Verbundwerkstoffen. PhD Thesis, ISD, Universität Stuttgart, 2006 [German].
31. Puck A, Matthias Deuschle H. A simple physically based degradation model for FRP-UD laminate after onset of cracking caused by inter fibre fracture. Compos Sci Technol. 2009 ;:
32. Knops M. Gradual failure process in fibre/polymer laminates. PhD Thesis, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2003 [German].
33. Knops M, Bögle C. Gradual failure process in fibre/polymer laminates. Compos Sci Technol. 2006 ; 66: 616-625 (Pubitemid 43055637)
34. D'Ottavio M, Wittel FK, Reiser J Damage and its evolution in fiber-composite materials. Busse G Kröplin B-H Wittel FK, ed. Stuttgart: ISD Verlag ; 2006 :
35. Lambrecht L. Numerische Experimente zur Analyse der Einflussgrö ßen auf die Degradation von mehrschichtigem GFK-Laminat. Master Thesis, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2003 [German].
36. Fischer O and Mannigel M. COMPOSITOR 3.0: Hilfsmittel zur Analyse von Laminaten aus Faserverbundkunststoffen, Institut für Kunststoffverarbeitung (IKV), RWTH Aachen, 2007 [German].
37. Hine PJ, Duckett RA, Kaddour AS, et al. The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites. Compos Appl Sci Manuf. 2005 ; 36: 279-289
38. Kaddour AS, Hinton MJ. Benchmarking of triaxial failure criteria for composite laminates: comparison between models of 'Part (A)' of 'WWFE-II'. J Compos Mater. 2012 ; 46: 2593-2632