Investigation of Plasma Treatment on Poly(3-hydroxybutyrate) Film Surface: Characterization and Invitro Assay

Polymer - Plastics Technology and Engineering

Volumn 51, Issue 13, 2012, Pages 1319-1326

  Mirmohammadi, Seyed Amin ^a   Khorasani, Mohammad Taghi ^a   Mirzadeh, Hamid ^b   Irani, Shiva ^c  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

^b AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^c ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Fibroblast cell; Morphology; Plasma treatment; Poly(3 hydroxybutyrate); Surface charge; Wettability

Indexed keywords

BACTERIAL SOURCE; BULK PROPERTIES; FIBROBLAST CELLS; FILM SURFACES; IN-VITRO ASSAYS; NANOPROTRUSIONS; PLASMA TREATMENT; POLY-3-HYDROXYBUTYRATE; SURFACE CHANGES; TWO PARAMETER;

BIOCOMPATIBILITY; CARBON DIOXIDE; CELL CULTURE; FIBROBLASTS; MORPHOLOGY; SURFACE CHARGE; SURFACE MORPHOLOGY; SURFACE PROPERTIES; WETTING;

PLASMA APPLICATIONS;

EID: 84867204525     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602559.2012.701365     Document Type: Article

References (44)

1. Kunze, C.; Freier, T.; Kramer, S.; Schmitz, K.P. Anti-inflammatory prodrugs as plasticizers for biodegradable implant materials based on poly(3-hydroxybutyrate). J. Mater. Sci. Mater. Med. 2002, 13, 1051-1055.
2. Ratnam, C.T.; Hill, D.J.T.; Rasoul, F.; Whittaker, I.A.K. Surface Plasma Modification of LLDPE for Biomedical Applications. Polym. Plast. Technol. Eng. 2009, 49, 1-7.
3. Fu, Y.F.; Xu, K.; Li, J.; Sun, Z.Y.; Zhang, F.Q. The influence of plasma surface treatment of carbon fibers on the interfacial adhesion properties of UHMWPE composite. Polym. Plast. Technol. Eng. 2012, 51, 273-276.
4. Changa, C.J.; Hsu, S.H. The effect of high outflow permeability in asymmetric poly(DL-lactic acid-co-glycolic acid) conduits for peripheral nerve regeneration. Biomaterials 2006, 27, 1035-1042.
5. Nakagawa, M.; Teraoka, F.; Fujimoto, S.; Hamada, Y.; Kibayashi, H.; Takahashi, J. Improvement of cell adhesion on poly(L-lactide) by atmospheric plasma treatment. J. Biomed. Mater. Res. A 2006, 77, 112-118.
6. Wan, Y.; Tu, C.; Yang, J.; Bei, J.; Wang, S. Influences of ammonia plasma treatment on modifying depth and degradation of poly(L-lactide) scaffolds. Biomaterials 2006, 27, 2699-2704.
7. Kai, Z.; Ying, D.; Guo-Qiang, C. Effects of surface morphology on the biocompatibility of polyhydroxyalkanoates. Biochem. Eng. J. 2003, 16, 115-123.
8. Martina, M.; Hutmacher, D.W. Biodegradable polymers applied in tissue engineering research: A review. Polym. Int. 2007, 56, 145-157.
9. Leal, T.L.; Carvalho, L.H.; Lira, H.L.; Júnior, C.A.; d'Almeida, J.R.M. Cold plasma surface treatment of UHMWPE membranes to improve fouling characteristics. Polym. Plast. Technol. Eng. 2011, 50, 466-473.
10. Griffin, G.J.L. Chemistry and Technology of Biodegradable Polymers, ed.; Springer: London, 1994.
11. Nitschke, M.; Schmack, G.; Janke, A.; Simon, F.; Pleul, D.; Werner, C. Low pressure plasma treatment of poly(3-hydroxybutyrate): Toward tailored polymer surfaces for tissue engineering scaffolds. J. Biomed. Mater. Res. A 2002, 59, 632-638.
12. Jagur-Grodzinski, J. Polymers for targeted and/or sustained drug delivery. Polym. Adv. Tech. 2009, 20, 595-606.
13. Wu, A.K.; Grndahlb, L.; Jackc, K.S.; Foob, M.X.; Trauc, M.; Humea, D.A.; Cassady, A.L. Reduction of the in vitro pro-inflammatory response by macrophages to poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Biomaterials 2006, 27, 4715-4725.
14. Song, C.; Wang, S.; Ono, S.; Zhang, B.; Shimasaki, C. The biodegradation of Poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHB/V) and PHB/V-degrading microorganisms in soil. Polym. Adv. Tech. 2003, 14, 184-188.
15. Wang, Y.; Bian, Y.; Wu, Q.; Chen, G. Evaluation of three-dimensional scaffolds prepared from poly(3-hydroxybutyrateco-3-hydroxyhexanoate) for growth of allogeneic chondrocytes for cartilage repair in rabbits. Biomaterials 2008, 29, 2858-2868.
16. Zhao, K.; Deng, Y.; Chen, J.C.; Chen, G.Q. Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility. Biomaterials 2003, 24, 1041-1045.
17. Nebe, B.; Forster, C.; Pommerenke, H.; Fulda, G.; Behrend, D.; Bernewski, U. Structural alterations of adhesion mediating components in cells cultured on poly-beta-hydroxybutyric acid. Biomaterials 2001, 22, 2425-2434.
18. Deng, Y.; Zhao, K.; Zhang, Z.F.; Hu, P.; Chen, G.Q. Study on the three-dimensional proliferation of rabbit articular cartilage-derived chondrocytes on polyhydroxyalkanoate scaffolds. Biomaterials. 2002, 23, 4049-4056.
19. Zhang, D.M.; Cui, F.Z.; Luo, Z.S.; Lin, Y.B.; Zhao, K.; Chen, G.Q. Wettability improvement of bacterial polyhydroxyalkanoates via ion implantation. Surf. Coat. Technol. 2000, 131, 350-354.
20. Khorasani, M.T.; Mirmohammadi, S.A.; Irani, S. Polyhydroxybutyrate (PHB) scaffolds as a model for nerve tissue engineering application: Fabrication and in vitro assay. Int. J. Polym. Mater. 2011, 60, 562-575.
21. Ying, T.H.; Ishii, D.; Mahara, A.; Murakami, S. Scaffolds from electrospun polyhydroxyalkanoate copolymers: Fabrication, characterization, bioabsorption and tissue response. Biomaterials 2008, 29, 1307-1317.
22. Altankov, G.; Groth, T. Reorganization of substratum-bound fibronection on hydrophilic and hydrophobic materials is related to biocompatibility. J. Mater. Sci. Mater. Med. 1994, 5, 732-737.
23. Leung, V.; Ko, F. Biomedical applications of nanofibers. Polym. Adv. Tech. 2011, 22, 350-365.
24. Wang, Y.; Lu, L.; Zheng, Y.; Chen, X. Improvement in hydrophilicity of PHBV films by plasma treatment. J. Biomed. Mater. Res. A 2006, 76, 589-595.
25. Pasquier, N.; Keul, H.; Moeller, M. Polymers with specific adhesion properties for surface modification: Synthesis, characterization and applications. Des Monomers Polym. 2005, 8, 679-703.
26. Poll, H.U.; Schreiter, S. Penetration of plasma effects into textile structures. Surf. Coat. Technol. 2001, 489, 142-144.
27. Doi, Y.; Kunioka, M.; Nakamura, Y.; Soga, K. Nuclear magnetic resonance studies on poly(β-hydroxybutyrate) and a copolyester of β-hydroxybutyrate and β-hydroxyvalerate isolated from Alcaligenes eutrophus H16. Macromolecules 1986, 19, 2860-2864.
28. Li, J., Zhou, Z. The TPB properties of plasma-treated carbon fiber-reinforced polystyrene composites. Polym. Plast. Technol. Eng. 2009, 49, 20-23.
29. Yen, C.; He, H.; Fei, Z.; Zhang, X.; Lee, L.J.; Ho, W.S.W. Surface modification of nanoporous polycaprolactone membrane with poly(ethylene glycol) to prevent biofouling: Part I. Effects of plasma power and treatment time. Int. J. Polym. Mater. 2010, 59, 923-942.
30. Pascu, M.; Vasile, C.; Popa, G.; Mihaila, I.; Pohoata, V. Modification of polymer blends properties by plasma/electron beam treatment. I. Plasma diagnosis and bulk properties of plasma treated blends. Int. J. Polym. Mater. 2002, 51, 181-192.
31. Zhou, Z.; Liu, X.; Liu, L.; Yi, Q.Fabrication and properties of composite biomaterials composed of poly(L-Lactide) and bovine bone. Des Monomers Polym.2009, 12, 57-67.
32. Li, G.; He, Y.; Yang, C.; Yang, F.; Yu, X.; Ren, F.; Cui, Y. Plasma-induced polymerization of 2-methacryloyloxyethyl trimethyl ammonium chloride. Des Monomers Polym. 2006, 9, 317-323.
33. El-Ola, S.M.A. Recent developments in finishing of synthetic fibers for medical applications. Des Monomers Polym. 2008, 11, 483-533.
34. Magga, Y.; Dérail, C.; Guerton, F.; Ponche, A.; Soulem, N. Surface modification of polymer using AC-pulsed plasma optimization of the electrical parameters and characterization by contact angle and probe-tack tests. Surf. Coat. Technol. 2009, 203, 1573-1579.
35. Shen, J.; Li, Y.; Zuo, Y.; Zou, Q.; Zhang, L.; Liu, H. Surface modification of polyamide 6 immobilized with collagen: Characterization and cytocompatibility. Int. J. Polym. Mater. 2011, 60, 907-921.
36. Vesel, A.; Junkar, I.; Cvelbar, U.; Kovac, J.; Mozetic, M. Surfacemodification of polyester by oxygenand nitrogen-plasma treatment. Surf. Interf. Anal. 2008, 40, 1444-1453.
37. Yen, C.; He, H.; Fei, Z.; Zhang, X.; Lee, L.J.; Ho, W.S.W. Surface modification of nanoporous poly(ε{lunate}-caprolactone) membrane with poly(ethylene glycol) to prevent biofouling: Part II. Effects of graft density and chain length. Int. J. Polym. Mater. 2010, 59, 943-957.
38. Khorasani, M.T.; Mirzadeh, H.; Irani, S. Plasma surface modification of poly(L-lactic acid) and poly(lactic-co-glycolic acid) films for improvement. of nerve cells adhesion. Rad. Phys. Chem. 2008, 77, 280-287.
39. Khorasani, M.T.; Mirzadeh, H. Effect of oxygen plasma treatment on surface charge and wettability of PVC blood bag-In vitro assay. Rad. Phys. Chem. 2007, 76, 1011-1016.
40. Gawish, S.M.; Ramadan, A.M.; Matthews, S.R.; Bourham, M.A. Modification of PA6,6 by atmospheric plasma and grafting 2-hydroxy ethyl methacrylate (HEMA) to improve fabric properties. Polym. Plast. Tec. Eng. 2008, 47, 473-478.
41. 2 filler. Polym. Plast. Tech. Eng. 2012, 51, 696-700.
42. Fallahi, D.; Mirzadeh, H.; Khorasani, M.T. Physical, mechanical, and biocompatibility evaluation of three different types of silicone rubber. J. Appl. Polym. Sci. 2003, 88, 2522-2529.
43. Parvin, A.; Mirzadeh, H.; Khorasani, M.T. Physicochemical and biological evaluation of plasma-induced graft polymerization of acrylamide onto polydimethylsiloxane. J. Appl. Polym. Sci. 2008, 107, 2343-2349.
44. Khorasani, M.T.; Mirzadeh, H. BHK cells behaviour on laser treated polydimethylsiloxane surface. Coll. Surf. B Biointerf. 2004, 35, 67-71.