Erratum: Mechanical performance and dimensional stability of nano-silver impregnated densified spruce wood (European Journal of Wood and Wood Products DOI 10.1007/s00107-011-0590-7);Mechanical performance and dimensional stability of nano-silver impregnated densified spruce wood

European Journal of Wood and Wood Products

Volumn 70, Issue 5, 2012, Pages 595-600

  Rassam, Ghonche ^a   Ghofrani, Mohammad ^a   Taghiyari, Hamid Reza ^a   Jamnani, Behnam ^b   Khajeh, Mohamad Ali ^a  

^a SHAHID RAJAEE TEACHER TRAINING UNIVERSITY   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; DENSITY (SPECIFIC GRAVITY); DURABILITY; PRESSES (MACHINE TOOLS); WOOD;

DURABILITY TEST; EARTHQUAKE LOAD; LOW DENSITY WOOD; MECHANICAL PERFORMANCE; MODULUS OF RUPTURE; PHYSICAL AND MECHANICAL PROPERTIES; PRESS CONDITION; RADIAL DIRECTION;

SILVER;

BEND STRENGTH; IMPREGNATION; MECHANICAL PROPERTIES; PICEA; PRESSES; SILVER COMPOUNDS;

EID: 84865990265     PISSN: 00183768     EISSN: 1436736X     Source Type: Journal    
DOI: 10.1007/s00107-012-0598-7     Document Type: Erratum

References (24)

1. ASTM D 143 (2000) Standard test methods for small clear specimens of timber
2. Bodig J, Jayne BA (1982) Mechanics of wood and wood composites. Van Nostrand Reinhold Company, New York
3. Boonstra MJ, Blomberg J (2007) Semi-isostatic densification of heattreated radiata pine. Wood Sci Technol 41:607-617 (Pubitemid 47389357)
4. Cai A, Akhtar X, Feng M, Wan H, Zhang T (2009) Development of value-added products from BC low-quality wood resource using nano-based technology literature review. Prepared for FP Innovations FORITEK. Forestry Innovation Investment
5. Cai X, Riedl B, Zhang SY, Wan H (2007) Effects of nanofillers on water resistance and dimensional stability of solid wood modified by melamine-urea-formaldehyde resin. Wood Fiber Sci 39(2):307-318 (Pubitemid 46779629)
6. Dwianto W, Inoue M, Tanaka F, Norimoto M (1996) The permanent fixation of compressive deformation in wood by heat treatment. In: Proceeding from the 3rd Pacific Rim Bio-based composites symposium, Kyoto, Japan
7. Heger F, Groux M, Girardet F,Welzbacher C, Rapp AO, Navi P (2004) Mechanical and durability performance of THM-densified wood. In: Final workshop COST action E22 environmental optimization of wood protection, Lisbon, Portugal
8. Hsu WE, Schwald J, Shields A (1998) Chemical and physical changes required for producing dimensionally stable wood-based composites. Part 1: Steam pre-treatment. Wood Sci Technol 22:281-289
9. Inoue M, Norimoto M, Tanahashi M, Rowell RM(1993) Steam or heat fixation of compressed wood. Wood Fiber Sci 25(3):224-235
10. Inoue M, Sekino N, Morooka T, Norimoto M (1996) Dimensional stabilization of wood composites by steaming I. Fixation of compressed wood by pre-steaming. In: Proceeding from the 3rd pacific rim-bio-based composites symposium, Kyoto, Japan
11. Ito Y, Tanahashi M, Shigematsu M, Sinoda Y, Ohta C (1998) Compressive-molding of wood by high pressure steam. Part I. Development of compressively molded squares from thinnings. Holzforschung 52(2):211-216 (Pubitemid 128561941)
12. Kamke FA (2006) Densified radiata pine for structural composites. Maderas. Ciencia y technologia 8(2):83-92 (Pubitemid 44286737)
13. Kocaefe D, Poncsak S, Boluk Y (2008) Thermal treatment of aspen (effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen). Bio Resources 3(2):517-537
14. Kollmann F (1936) Technologie des Holzes und der Holzwerkstoffe. Springer, Berlin
15. Mohebby B, Sharifnia-Dizboni H, Kazemi-Najafi S (2009) Combined hydro-thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification. In: Proceeding from 4th European conference on wood Modification, Stockholm, Sweden
16. Morsing N (2000) Densification of wood. The influence of Hygrothermal treatment on compression of beech perpendicular to the grain. Department of Structural Engineering and Materials Technical University of Denmark. Series R No. 79
17. Navi P, Girardet F (2000) Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung 54:287-293 (Pubitemid 34044059)
18. Navi P, Heger F (2004) Combined densification and thermo-hydromechanical processing of wood. MRS bulletin
19. Rassam G, Taghiyari HR, Jamnani B, Khaje MA (2010) Effect of Nano-Silver treatment on densified wood properties. Part one: swelling, recovery set, bending strength, Biarritz, France: International Research Group of Wood Protection, Doc. No.: IRG/WP 10-40533
20. Siau JF (1984) Transport processes in wood. Springer, New York, 245 pp
21. Spiegelberg HL (1966) The effect of hemicelluloses on the mechanical properties of individual pulp fibers. Dissertation, Lawrence University
22. Taghiyari HR (2010) Study on the effect of nano-silver impregnation on mechanical properties of heat-treated Populus nigra.Wood Sci Technol 45(2):399-404
23. Welzbacher CR, Wehsener J, Haller P, Rapp AO (2006) Biologische und mechanische Eigenschaften von verdichteter und thermisch behandelter Fichte (Picea abies). Holztechnologie 3:13-18
24. Welzbacher CR, Wehsener J, Rapp AO, Haller P (2008) Thermomechanical densification combined with thermal modification of Norway spruce (Picea abies Karst) in industrial scaledimensional stability and durability aspects. Holz Roh Werkst 66:39-49 (Pubitemid 351185662)