메뉴 건너뛰기




Volumn 7, Issue 3, 2012, Pages 3656-3669

Thermo-vacuum modification of spruce (picea abies karst.) and fir (abies alba mill.) wood

Author keywords

Color modification; Durability; Fir; Mass loss; Physical mechanical properties; Spruce; Thermally modified wood; Thermo vacuum method

Indexed keywords

COLOR MODIFICATION; FIR; MASS LOSS; PHYSICAL-MECHANICAL PROPERTIES; SPRUCE; THERMALLY MODIFIED WOOD; THERMO-VACUUM METHOD;

EID: 84865757499     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article
Times cited : (87)

References (24)
  • 1
    • 0036541262 scopus 로고    scopus 로고
    • Thermochemical behaviour of Norway spruce (Picea abies) at 180-225°C
    • Alen, R., Kotilainen, R., and Zaman, A. (2002). "Thermochemical behaviour of Norway spruce (Picea abies) at 180-225°C," Wood Sci. Technol. 36, 163-171.
    • (2002) Wood Sci. Technol. , vol.36 , pp. 163-171
    • Alen, R.1    Kotilainen, R.2    Zaman, A.3
  • 2
    • 0141853041 scopus 로고    scopus 로고
    • Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood
    • Bekhta, P., and Niemz, P. (2003). "Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood," Holzforschung 57, 539-546.
    • (2003) Holzforschung , vol.57 , pp. 539-546
    • Bekhta, P.1    Niemz, P.2
  • 3
    • 0036684250 scopus 로고    scopus 로고
    • Natural vibration analysis of clear wooden beams: A theoretical review
    • Brancheriau, L., and Baillères, H. (2002). "Natural vibration analysis of clear wooden beams: A theoretical review," Wood Sci. Technol. 36, 347-365.
    • (2002) Wood Sci. Technol. , vol.36 , pp. 347-365
    • Brancheriau, L.1    Baillères, H.2
  • 4
    • 33846302454 scopus 로고    scopus 로고
    • Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L* a* b* color data on homogenized wood samples
    • Brischke, C., Welzbacher, C., Brandt, K., and Rapp A.O. (2007). "Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L*a*b* color data on homogenized wood samples," Holzforschung 61, 19-22.
    • (2007) Holzforschung , vol.61 , pp. 19-22
    • Brischke, C.1    Welzbacher, C.2    Brandt, K.3    Rapp, A.O.4
  • 5
    • 76549115117 scopus 로고    scopus 로고
    • Wood modification by heat treatment: A review
    • Esteves, B. M., and Pereira, H. M. (2009). "Wood modification by heat treatment: A review," BioResources 4(1), 370-404.
    • (2009) BioResources , vol.4 , Issue.1 , pp. 370-404
    • Esteves, B.M.1    Pereira, H.M.2
  • 6
    • 0005988503 scopus 로고    scopus 로고
    • Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values
    • European Committee for Standardization, EN 113.
    • European Committee for Standardization (1996). EN 113. "Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values."
    • (1996)
  • 7
    • 0041410799 scopus 로고
    • Wood preservatives: Accelerated ageing of treated wood prior to biological testing: Leaching procedure
    • European Committee for Standardization, EN 84.
    • European Committee for Standardization (1989). EN 84. "Wood preservatives: Accelerated ageing of treated wood prior to biological testing: Leaching procedure."
    • (1989)
  • 8
    • 0007692244 scopus 로고
    • Durability of wood and wood-based products - Natural durability of solid wood. Part 1: Guide to the principles of testing and classification of the natural durability of wood
    • European Committee for Standardization, EN 350-1
    • European Committee for Standardization (1994). EN 350-1, "Durability of wood and wood-based products - Natural durability of solid wood. Part 1: Guide to the principles of testing and classification of the natural durability of wood."
    • (1994)
  • 9
    • 0007670885 scopus 로고
    • Durability of wood and wood-based products - Natural durability of solid wood. Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
    • European Committee for Standardization, EN 350-2
    • European Committee for Standardization (1994). EN 350-2. "Durability of wood and wood-based products - Natural durability of solid wood. Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe."
    • (1994)
  • 10
    • 4243433050 scopus 로고    scopus 로고
    • Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method
    • European Committee for Standardization, ENV 12037
    • European Committee for Standardization (1996). ENV 12037. "Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method."
    • (1996)
  • 11
    • 33644957768 scopus 로고    scopus 로고
    • Finnish ThermoWood Association, Helsinki, Finland.
    • Finnish ThermoWood Association (2003). ThermoWood Handbook, Helsinki, Finland.
    • (2003) ThermoWood Handbook
  • 12
    • 84865731660 scopus 로고
    • Tecnologia del legno
    • Giordano, G. (1986). "Tecnologia del legno," UTET. Vol. I, 1140.
    • (1986) UTET. , vol.1 , pp. 1140
    • Giordano, G.1
  • 13
    • 67650517343 scopus 로고    scopus 로고
    • Color in thermally modified wood of beech, Norway spruce, and Scots pine. Part 1: color evolution and color changes
    • Gonzales-Peña, M., and Hale, M. (2009). "Color in thermally modified wood of beech, Norway spruce, and Scots pine. Part 1: color evolution and color changes," Holzforschung 63, 385-393.
    • (2009) Holzforschung , vol.63 , pp. 385-393
    • Gonzales-Peña, M.1    Hale, M.2
  • 14
    • 27844593389 scopus 로고    scopus 로고
    • Investigation of the reasons for fungal durability of heat-treated beech wood
    • Hakkou, M., Petrissans, M., Gerardin, P., and Zoulalian, A. (2006). "Investigation of the reasons for fungal durability of heat-treated beech wood," Polym Degrad Stab 9, 393-397.
    • (2006) Polym Degrad Stab , vol.9 , pp. 393-397
    • Hakkou, M.1    Petrissans, M.2    Gerardin, P.3    Zoulalian, A.4
  • 16
    • 10044240281 scopus 로고
    • Wood-Determination of moisture content for physical and mechanical tests
    • ISO 3130
    • ISO 3130 (1975). "Wood-Determination of moisture content for physical and mechanical tests."
    • (1975)
  • 17
    • 0012369185 scopus 로고
    • Wood-Determination of ultimate strength in static bending
    • ISO 3133
    • ISO 3133 (1975). "Wood-Determination of ultimate strength in static bending."
    • (1975)
  • 18
    • 0141428497 scopus 로고
    • Wood-Test methods-Determination of ultimate stress in compression parallel to grain
    • ISO 3787
    • ISO 3787 (1976). "Wood-Test methods-Determination of ultimate stress in compression parallel to grain."
    • (1976)
  • 19
    • 0141763181 scopus 로고
    • Wood-Determination of radial and tangential shrinkage
    • ISO 4469
    • ISO 4469 (1981). "Wood-Determination of radial and tangential shrinkage."
    • (1981)
  • 20
    • 64749093424 scopus 로고    scopus 로고
    • Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen
    • Kim, G., Yun, K., and Kim, J. (1998). "Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen," BioResources 3(2), 517-391.
    • (1998) BioResources , vol.3 , Issue.2 , pp. 517-391
    • Kim, G.1    Yun, K.2    Kim, J.3
  • 21
    • 84865731663 scopus 로고    scopus 로고
    • Preface of The second European Conference on Wood Modification
    • October 6-7 2005, Gottingen, Germany.
    • Militz, H. (2005), Preface of The second European Conference on Wood Modification, in Proceedings for the 2nd European conference on wood modification, October 6-7 2005, Gottingen, Germany.
    • (2005) Proceedings for the 2nd European conference on wood modification
    • Militz, H.1
  • 22
    • 34547209625 scopus 로고    scopus 로고
    • Mechanical behavior of Québec wood species heat-treated using ThermoWood process
    • Shi, J. L., Kocaefe, D. and Zhang, J. (2007). "Mechanical behavior of Québec wood species heat-treated using ThermoWood process," Holz Roh Werkst 65, 255-259.
    • (2007) Holz Roh Werkst , vol.65 , pp. 255-259
    • Shi, J.L.1    Kocaefe, D.2    Zhang, J.3
  • 23
    • 84865731662 scopus 로고    scopus 로고
    • Prediction of flooring-relevant properties based on color values of thermally modified timber (TMT)
    • September 20-21 2010, Riga, Latvia.
    • Welzbacher, C., Meyer, L. and Brischke, C. (2010). "Prediction of flooring-relevant properties based on color values of thermally modified timber (TMT)," In: Proceedings for the 5th European Conference on Wood Modification, September 20-21 2010, Riga, Latvia.
    • (2010) Proceedings for the 5th European Conference on Wood Modification
    • Welzbacher, C.1    Meyer, L.2    Brischke, C.3
  • 24
    • 84856567401 scopus 로고    scopus 로고
    • Mechanische und physikalische Eigenschaften von mit dem Vakuumpress-Trocknungsverfahren thermisch behandeltem Holz
    • Wetzig, M., Sieverts, T., Bergemann, H., and Niemz, P. (2012). "Mechanische und physikalische Eigenschaften von mit dem Vakuumpress-Trocknungsverfahren thermisch behandeltem Holz," Bauphysik 34, 1-10.
    • (2012) Bauphysik , vol.34 , pp. 1-10
    • Wetzig, M.1    Sieverts, T.2    Bergemann, H.3    Niemz, P.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.