Interfacial shear strength of bioactive-coated carbon fiber reinforced polyetheretherketone after in vivo implantation

Journal of Orthopaedic Research

Volumn 30, Issue 10, 2012, Pages 1618-1625

  Nakahara, Ichiro ^a   Takao, Masaki ^a   Goto, Tomoyo ^b   Ohtsuki, Chikara ^b   Hibino, Shigeru ^c   Sugano, Nobuhiko ^a  

^a OSAKA UNIVERSITY GRADUATE SCHOOL OF MEDICINE   (Japan)

^b NAGOYA UNIVERSITY   (Japan)

^c BITEC Co Ltd   (Japan)

Author keywords

carbon fiber reinforced PEEK; coating adhesion; hydroxyapatite; interfacial shear strength; osseointegration

Indexed keywords

CARBON FIBER; HYDROXYAPATITE; POLYETHERETHERKETONE; TITANIUM;

ANIMAL EXPERIMENT; ANIMAL TISSUE; ARTICLE; COMPARATIVE STUDY; CONTROLLED STUDY; FEMUR; IMPLANT; IN VIVO STUDY; MATERIAL COATING; NONHUMAN; PRIORITY JOURNAL; SHEAR STRENGTH;

ANIMALS; BIOCOMPATIBLE MATERIALS; CARBON; DURAPATITE; KETONES; MATERIALS TESTING; POLYETHYLENE GLYCOLS; PROSTHESES AND IMPLANTS; PROSTHESIS IMPLANTATION; RABBITS; SHEAR STRENGTH;

EID: 84865524457     PISSN: 07360266     EISSN: 1554527X     Source Type: Journal    
DOI: 10.1002/jor.22115     Document Type: Article

References (41)

1. Rohner B, Wieling R, Magerl F, et al. 2005. Performance of a composite flow moulded carbon fibre reinforced osteosynthesis plate. Vet Comp Orthop Traumatol 18: 175-182. (Pubitemid 41252885)
2. Toth JM, Wang M, Estes BT, et al. 2006. Polyetheretherketone as a biomaterial for spinal applications. Biomaterials 27: 324-334. (Pubitemid 41457235)
3. Scotchford CA, Garle MJ, Batchelor J, et al. 2003. Use of a novel carbon fibre composite material for the femoral stem component of a THR system: in vitro biological assessment. Biomaterials 24: 4871-4879. (Pubitemid 37188667)
4. Scholes SC, Unsworth A., 2009. Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials. J Mater Sci Mater Med 20: 163-170.
5. Wenz LM, Merritt K, Brown SA, et al. 1990. In vitro biocompatibility of polyetheretherketone and polysulfone composites. J Biomed Mater Res 24: 207-215. (Pubitemid 20123724)
6. Morrison C, Macnair R, MacDonald C, et al. 1995. In vitro biocompatibility testing of polymers for orthopaedic implants using cultured fibroblasts and osteoblasts. Biomaterials 16: 987-992.
7. Hennessy DW, Callaghan JJ, Liu SS., 2009. Second-generation extensively porous-coated THA stems at minimum 10-year followup. Clin Orthop Relat Res 467: 2290-2296.
8. Yildiz H, Ha SK, Chang FK., 1998. Composite hip prosthesis design. I. Analysis. J Biomed Mater Res 39: 92-101. (Pubitemid 128751762)
9. Yildiz H, Chang FK, Goodman S., 1998. Composite hip prosthesis design. II. Simulation. J Biomed Mater Res 39: 102-119. (Pubitemid 128751763)
10. Skinner HB., 1988. Composite technology for total hip arthroplasty. Clin Orthop Relat Res 235: 224-236.
11. Götze C, Tschugunow A, Götze HG, et al. 2006. Long-term results of the metal-cancellous cementless Lübeck total hip arthroplasty: a critical review at 12.8 years. Arch Orthop Trauma Surg 126: 28-35. (Pubitemid 43124295)
12. Kishida Y, Sugano N, Ohzono K, et al. 2002. Stem fracture of the cementless spongy metal Lübeck hip prosthesis. J Arthroplasty 17: 1021-1027. (Pubitemid 35462945)
13. Zhang G, Latour RA Jr, Kennedy JM, et al. 1996. Long-term compressive property durability of carbon fibre-reinforced polyetheretherketone composite in physiological saline. Biomaterials 17: 781-789. (Pubitemid 26108346)
14. Krüger T, Alter C, Reichel H, et al. 1998. Possibilities of follow-up imaging after implantation of a carbon fiber-reinforced hip prosthesis. Aktuelle Radiol 8: 81-86.
15. Thyssen JP, Jakobsen SS, Engkilde K, et al. 2009. The association between metal allergy, total hip arthroplasty, and revision. Acta Orthop 80: 646-652.
16. Ramirez MA, Rodriguez EK, Zurakowski D, et al. 2007. Detection of orthopaedic implants in vivo by enhanced-sensitivity, walk-through metal detectors. J Bone Joint Surg Am 89: 742-746. (Pubitemid 46564277)
17. Adam F, Hammer DS, Pfautsch S, et al. 2002. Early failure of a press-fit carbon fiber hip prosthesis with a smooth surface. J Arthroplasty 17: 217-223. (Pubitemid 34160576)
18. Magee FP, Weinstein AM, Longo JA, et al. 1988. A canine composite femoral stem. An in vivo study. Clin Orthop Relat Res 235: 237-252.
19. Wang A, Lin R, Polineni K, et al. 1998. Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement. Tribol Int 31: 661-667.
20. Auclair-Daigle C, Bureau MN., Legoux J-G, et al. 2005. Bioactive hydroxyapatite coatings on polymer composites for orthopedic implants. J Biomed Mater Res A 73: 398-408. (Pubitemid 40791387)
21. Ha SW, Gisep A, Mayer J, et al. 1997. Topographical characterization and microstructural interface analysis of vacuum-plasma-sprayed titanium and hydroxyapatite coatings on carbon fibre-reinforced poly(etheretherketone). J Mater Sci Mater Med 8: 891-896. (Pubitemid 28008893)
22. Yu S, Hariram KP, Kumar R, et al. 2005. In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites. Biomaterials 26: 2343-2352. (Pubitemid 39610465)
23. Fan JP, Tsui CP, Tang CY, et al. 2004. Influence of interphase layer on the overall elasto-plastic behaviors of HA/PEEK biocomposite. Biomaterials 25: 5363-5373. (Pubitemid 38586751)
24. Meenan BJ, McClorey C, Akay M., 2000. Thermal analysis studies of poly(etheretherketone)/hydroxyapatite biocomposite mixtures. J Mater Sci Mater Med 11: 481-489. (Pubitemid 30624112)
25. Dimitrievska S, Whitfield J, Hacking SA, et al. 2009. Novel carbon fiber composite for hip replacement with improved in vitro and in vivo osseointegration. J Biomed Mater Res 91: 37-51.
26. Abu Bakar MS, Cheng MHW, Tang SM, et al. 2003. Tensile properties, tension-tension fatigue and biological response of polyetheretherketone- hydroxyapatite composites for load-bearing orthopedic implants. Biomaterials 24: 2245-2250. (Pubitemid 36434042)
27. von Wilmowsky C, Lutz R, Meisel U, et al. 2009. In vivo evaluation of β-TCP containing 3D laser sintered poly(ether ether ketone) composites in pigs. J Bioactive Compatible Polym 24: 169-184.
28. Geesink RG, de Groot K, Klein CP., 1988. Bonding of bone to apatite-coated implants. J Bone Joint Surg Br 70: 17-22. (Pubitemid 18059151)
29. Cook SD, Thomas KA, Dalton JE, et al. 1992. Hydroxyapatite coating of porous implants improves bone ingrowth and interface attachment strength. J Biomed Mater Res 26: 989-1001.
30. Briem D, Strametz S, Schröder K, et al. 2005. Response of primary fibroblasts and osteoblasts to plasma treated polyetheretherketone (PEEK) surfaces. J Mater Sci Mater Med 16: 671-677. (Pubitemid 40908902)
31. Ha SW, Kirch M, Birchler F, et al. 1997. Surface activation of polyetheretherketone (PEEK) and formation of calcium phosphate coatings by precipitation. J Mater Sci Mater Med 8: 683-690. (Pubitemid 27485097)
32. Bobyn JD, Pilliar RM, Cameron HU, et al. 1980. The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone. Clin Orthop Relat Res 150: 263-270. (Pubitemid 10039063)
33. Feighan JE, Goldberg VM, Davy D, et al. 1995. The influence of surface-blasting on the incorporation of titanium-alloy implants in a rabbit intramedullary model. J Bone Joint Surg Am 77: 1380-1395.
34. Tisdel CL, Goldberg VM, Parr JA, et al. 1994. The influence of a hydroxyapatite and tricalcium-phosphate coating on bone growth into titanium fiber-metal implants. J Bone Joint Surg Am 76: 159-171. (Pubitemid 24116346)
35. Wang BC, Lee TM, Chang E, et al. 1993. The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone: the effect of coating thickness. J Biomed Mater Res 27: 1315-1327. (Pubitemid 23289654)
36. Capello WN, D'Antonio JA, Jaffe WL, et al. 2006. Hydroxyapatite-coated femoral components: 15-year minimum followup. Clin Orthop Relat Res 453: 75-80. (Pubitemid 44900962)
37. McNally SA, Shepperd JA, Mann CV, et al. 2000. The results at nine to twelve years of the use of a hydroxyapatite-coated femoral stem. J Bone Joint Surg Br 82: 378-382. (Pubitemid 30248919)
38. Suckel A, Geiger F, Kinzl L, et al. 2009. Long-term results for the uncemented Zweymuller/Alloclassic hip endoprosthesis. A 15-year minimum follow-up of 320 hip operations. J Arthroplasty 24: 846-853.
39. Reikerås O, Gunderson RB., 2002. Failure of HA coating on a gritblasted acetabular cup: 155 patients followed for 7-10 years. Acta Orthop Scand 73: 104-108. (Pubitemid 34218832)
40. Yang CY, Wang BC, Lee TM, et al. 1997. Intramedullary implant of plasma-sprayed hydroxyapatite coating: an interface study. J Biomed Mater Res 36: 39-48. (Pubitemid 27270996)
41. Simank HG, Stuber M, Frahm R, et al. 2006. The influence of surface coatings of dicalcium phosphate (DCPD) and growth and differentiation factor-5 (GDF-5) on the stability of titanium implants in vivo. Biomaterials 27: 3988-3994.