In vivo evaluation of B-TCP containing 3D laser sintered poly(ether ether ketone) composites in pigs

Journal of Bioactive and Compatible Polymers

Volumn 24, Issue 2, 2009, Pages 169-184

  Von Wilmonsky, Cornelius ^a   Lutz, Rainer ^a   Meisel, Ulf ^a   Srour, Safwan ^a   Rupprecht, Stephan ^a   Toyoshima, Takeshi ^a   Nkenke, Emeka ^a   Schlegel, Karl Andreas ^a   Pohle, Dirk ^a   Münstedt, Helmut ^a   Rechtenwald, Thomas ^b   Schmidt, Michael ^b  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^b Bavarian Laser Center   (Germany)

Author keywords

TCP; 3D shaped implants; Bone reconstruction.; Bone substitution; In vivo; Individually shaped implants; Laser sintering; Poly(ether ether ketone) (PEEK); Sintered PEEK biocompatibility; Tissue engineering

Indexed keywords

BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; BONE; ETHERS; IMPLANTS (SURGICAL); KETONES; LASER HEATING; LASER SURGERY; LASERS; RESTORATION; SHEAR STRENGTH; THREE DIMENSIONAL; TISSUE ENGINEERING; TRANSMISSION CONTROL PROTOCOL;

3D SHAPED IMPLANTS; BONE RECONSTRUCTION.; BONE SUBSTITUTION; IN VIVO; INDIVIDUALLY SHAPED IMPLANTS; LASER SINTERING; POLY(ETHER ETHER KETONE) (PEEK); SINTERED PEEK BIOCOMPATIBILITY;

SINTERING;

BIOMATERIAL; CALCIUM PHOSPHATE; POLYETHERETHER KETONE; UNCLASSIFIED DRUG;

ANIMAL EXPERIMENT; ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; BONE DEFECT; BONE GRAFT; BONE REMODELING; COMPOSITE MATERIAL; COMPRESSION; EXPERIMENTAL PIG; LASER; MORPHOMETRICS; NONHUMAN; SHEAR STRENGTH; SKULL DEFECT; THREE DIMENSIONAL IMAGING; TISSUE ENGINEERING;

SUIDAE; SUS;

EID: 62249144294     PISSN: 08839115     EISSN: 15308030     Source Type: Journal    
DOI: 10.1177/0883911508101149     Document Type: Article

References (34)

1. Kurtz, S.M. and Devine, J.N. (2007). PEEK Biomaterials in Trauma, Orthopedic, and Spinal Implants, Biomaterials, 28 (32). 4845-4869.
2. Hench, L.L. (1993). An Introduction to Bioceramics, pp. 1-24, World Scientific Publishing Co., Singapore.
3. Hing, K.A. and Best, S.M. (1997). Biochemical Assessment of Bone Ingrowth in Porous Hydroxyapatite, J. Mater. Sci.: Mater. Med., 8 (12). 731-736.
4. Damien, C.J. and Parsons, J.R. (1999). Bone Graft and Bone Graft Substitutes: A Review of Current Technology and Applications, J. Biomed. Mater. Res., 2 (3). 187-208.
5. Rechtenwald, T. (2004). An Investigation into Laser Sintering of PEEK, In: Proceedings of the 4th International Conference on Laser Assisted Net Shape Engineering, pp. 485-496, Meisenbach Verlag, Bamberg.
6. Williams, D. (2003). Revisiting the Definition of Biocompatibility, Med. Device Technol., 14 (8). 10-13.
7. von Wilmowsky, C. and Vairaktaris, E. (2008). Effects of Bioactive Glass and Beta-TCP Containing Three-dimensional Laser Sintered Polyetheretherketone Composites on Osteoblasts In Vitro, J. Biomed. Mater. Res. A., 87 (4). 896-902.
8. Pohle, D. and Ponader, S. (2007). Processing of 3D Laser Sintered Poly(ether ether ketone) Composites and Testing of Osteoblast Proliferation In Vitro, Macromolecular Symposia, 253 (1). 65-70.
9. Schmidt, M. and Pohle, D. (2007). Selective Laser Sintering of PEEK, CIRP Annals-Manufacturing Technology, Nr. 56 / 1, pp. 205-208, Elsevier, Amsterdam.
10. National Electrical Manufacturers Association (2007). Digital Imaging and Communications in Medicine (DICOM) Part 1: Introduction and Overview.
11. Pujol, S. and Kikinis, R. (2008). Lowering the Barriers Inherent in Translating Advances in Neuroimage Analysis to Clinical Research Applications, Acad. Radiol., 15 (1). 114-118.
12. Schroeder, W.J. (2001). VTK User's Guide: The Visualization Toolkit User's Guide. Kitware Inc.
13. Wohlers, T. (2003). Wohlers Report 2003: Rapid Prototyping, Tooling & Manufacturing State of the Industry, Annual Worldwide Progress Report, Wohlers Associates, Fort Collins, Colorado.
14. Godara, A. and Raabe, D. (2007). The Influence of Sterilization Processes on the Micromechanical Properties of Carbon Fiber-reinforced PEEK Composites for Bone Implant Applications, Acta Biomater., 3 (2). 209-220.
15. Laiblin, C. and Jaeschke, G. (1979). Clinical Chemistry Examinations of Bone and Muscle Metabolism Under Stress in the Gottingen Miniature Pig-an Experimental Study, Berl. Munch. Tierarztl. Wochenschr., 92 (6). 124-128.
16. Schlegel, K.A. and Lang, F.J. (2006). The Monocortical Critical Size Bone Defect as an Alternative Experimental Model in Testing Bone Substitute Materials, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod., 102 (1). 7-13.
17. von Wilmowsky, C. and Bauer, S. (2008). In Vivo Evaluation of Anodic TiO(2) Nanotubes: An Experimental Study in the Pig, J. Biomed. Mater. Res. B Appl. Biomater. September 8. [Epub ahead of print].
18. Donath, K. and Breuner, G. (1982). A Method for the Study of Undecalcified Bones and Teeth with Attached Soft Tissues. The Sage-Schliff (Sawing and Grinding) Technique, J. Oral Pathol., 11 (4). 318-326.
19. Katzer, A. and Marquardt, H. (2002). Poly(ether ether ketone)- Cytotoxicity and Mutagenicity In Vitro, Biomaterials, 23 (8). 1749-1759.
20. Schmitz, J.P. and Hollinger, J.O. (1986). The Critical Size Defect as an Experimental Model for Craniomandibulofacial Nonunions, Clin. Orthop. Relat. Res., 205: 299-308.
21. Wiltfang, J. and Schlegel, K.A. (2003). Sinus Floor Augmentation with Beta-tricalciumphosphate (beta-TCP): Does Platelet-rich Plasma Promote Its Osseous Integration and Degradation, Clin. Oral Implants Res., 14 (2). 213-218.
22. Hench, L.L. and Wilson, J. (1993). An Introduction to Bioceramics, World Scientific Publishing Co. Pvt. Ltd., Singapore, pp. 1-24.
23. Manley, M.T. (1993). Calcium Phosphate Biomaterials: A Review of the Literature, In: Geesink, R.G.T. (ed.), Hydroxylapatite Coatings in Orthopeadic Surgery, pp. 1-24, Raven Press, New York.
24. Osborn, J.F. (1980). Dynamic Aspects of the Implant Bone Interface, In: Heimke, G. (ed.), Dental Implants:Materials and Systems, pp. 111-123, Carl Hanser Verlag, Munich.
25. Linder, L. and Obrant, K. (1989). Osseointegration of Metallic Implants. II. Transmission Electron Microscopy in the Rabbit, Acta Orthop. Scand., 60 (2). 135-139.
26. Clokie, C.M. and Warshawsky, H. (1995). Morphologic and Radioautographic Studies of Bone Formation in Relation to Titanium Implants Using the Rat Tibia as a Model, Int. J. Oral Maxillofac. Implants, 10 (2). 155-165.
27. Wiltfang, J. and Merten, H.A. (2002). Degradation Characteristics of Alpha and Beta Tri-calcium-phosphate (TCP) in Minipigs, J. Biomed. Mater. Res., 63 (2). 115-121.
28. Dennis, P. and van den Dolder, J. (2006). Mechanical Evaluation of Implanted Calcium Phosphate Cement Incorporated with PLGA Microparticles, Biomaterials, 27 (28). 4941-4947.
29. Nishiguchi, S. and Kato, H. (2001). Titanium Metals Form Direct Bonding to Bone After Alkali and Heat Treatments, Biomaterials, 22 (18). 2525-2533.
30. Blauth, M. and Richter, M. (1999). Operative versus Non Operative Treatment of Odontoid Non Unions. How Dangerous is it Not to Stabilize a Non Union of the Dens ? Chirurg, 70 (11). 1225-1238.
31. Ashman, A. and Moss, M.L. (1977). Implantation of Porous Polymethylmethacrylate Resin for Tooth and Bone Replacement, J. Prosthet. Dent., 37 (6). 657-665.
32. Rechtenwald, T. and Pohle, D. (2007). Generation of Implants by Laser Sintering of PEEK-Process Development and Qualification of Parts, In: Geiger, M. (ed.), Proceedings of the 5th International Conference on Laser Assisted Net Shape Engineering, Nr. 5/1, pp. 491-501, Meisenbach Verlag, Bamberg.
33. Albrektsson, T. and Sennerby, L. (1999). A Comparison of Endosseous Dental Implant Surfaces, J. Periodontol., 71 (6). 1054-1055.
34. Kitsugi, T. and Nakamura, T. (1996). Bone-bonding Behaviour of Plasma-sprayed Coatings of BioglassR, AW-glass Ceramic, and Tricalcium Phosphate on Titanium Alloy, J. Biomed. Mater. Res., 30 (2). 261-269.