-
1
-
-
0003712808
-
-
Kluwer Academic Publishers: Norwell, MA, ISBN: 0792386191
-
Rosato, D. V.; Rosato, D. V.; Rosato, M. G. Injection Molding Handbook; Kluwer Academic Publishers: Norwell, MA, 2001; ISBN: 0792386191.
-
(2001)
Injection Molding Handbook
-
-
Rosato, D.V.1
Rosato, D.V.2
Rosato, M.G.3
-
2
-
-
0032058033
-
Effect of processing conditions on shrinkage in injection molding
-
Jansen, K. M. B.; Van Dijk, D. J.; Husselman, M. H. Effect of processing conditions on shrinkage in injection molding Polym. Eng. Sci. 1998, 38, 838-846 (Pubitemid 128593134)
-
(1998)
Polymer Engineering and Science
, vol.38
, Issue.5
, pp. 838-846
-
-
Jansen, K.M.B.1
Van Dijk, D.J.2
Husselman, M.H.3
-
3
-
-
3042991489
-
Shrinkage prediction for slowly-crystallizing thermoplastic polymers in injection molding
-
Han, S.; Wang, K. K. Shrinkage prediction for slowly-crystallizing thermoplastic polymers in injection molding Int. Polym. Process. 1997, 12, 228-237 (Pubitemid 127531052)
-
(1997)
International Polymer Processing
, vol.12
, Issue.3
, pp. 228-237
-
-
Han, S.1
Wang, K.K.2
-
4
-
-
34247207614
-
Polymer crystallization under high cooling rate and pressure: A step towards polymer processing conditions
-
Reiter, G. Strobl, G. Springer: Berlin, Vol. Chapter 16
-
Sorrentino, A.; De Santis, F.; Titomanlio, G. Polymer crystallization under high cooling rate and pressure: a step towards polymer processing conditions. In Lecture Notes in Physics: Progress in Understanding of Polymer Crystallization; Reiter, G.; Strobl, G., Eds.; Springer: Berlin, 2007; Vol. 714, Chapter 16, pp 329-344.
-
(2007)
Lecture Notes in Physics: Progress in Understanding of Polymer Crystallization
, vol.714
, pp. 329-344
-
-
Sorrentino, A.1
De Santis, F.2
Titomanlio, G.3
-
5
-
-
84889970484
-
-
Schellenberg, J. John Wiley & Sons: New York, Chapter 9
-
Sorrentino, A.; Vittoria, V. In Syndiotactic Polystyrene: Synthesis, Characterization, Processing, and Applications; Schellenberg, J., Ed.; John Wiley & Sons: New York, 2010; Chapter 9, pp 155-193.
-
(2010)
Syndiotactic Polystyrene: Synthesis, Characterization, Processing, and Applications
, pp. 155-193
-
-
Sorrentino, A.1
Vittoria, V.2
-
6
-
-
0025700337
-
Polymorphism in melt crystallized syndiotactic polystyrene samples
-
Guerra, G.; Vitagliano, V.; De Rosa, C.; Petraccone, V.; Corradini, P. Polymorphism in melt crystallized syndiotactic polystyrene samples Macromolecules 1990, 23, 1539-1544 (Pubitemid 20659568)
-
(1990)
Macromolecules
, vol.23
, Issue.5
, pp. 1539-1544
-
-
Guerra Gaetano1
Vitagliano Vincenzo, M.2
De Rosa Claudio3
Petraccone Vittorio4
Corradini Paolo5
-
7
-
-
0037371997
-
Crystallization from the melt of α and β forms of syndiotactic polystyrene
-
DOI 10.1016/S0032-3861(02)00885-6, PII S0032386102008856
-
Ruiz de Ballesteros, O.; Di Gennaro, M.; Auriemma, F. Crystallization from the melt of α and β forms of syndiotactic polystyrene Polymer 2003, 44, 1861-1870 (Pubitemid 36232283)
-
(2003)
Polymer
, vol.44
, Issue.6
, pp. 1861-1870
-
-
De Rosa, C.1
De Ballesteros, O.R.2
Di Gennaro, M.3
Auriemma, F.4
-
8
-
-
0036040173
-
Molecular orientation and strain in injection moulding of thermoplastics
-
Pantani, R.; Speranza, V.; Sorrentino, A.; Titomanlio, G. Molecular orientation and strain in injection moulding of thermoplastics Macromol. Symp. 2002, 185, 293-307
-
(2002)
Macromol. Symp.
, vol.185
, pp. 293-307
-
-
Pantani, R.1
Speranza, V.2
Sorrentino, A.3
Titomanlio, G.4
-
9
-
-
34748841375
-
Solidification of syndiotactic polystyrene by a continuous cooling transformation approach
-
DOI 10.1002/polb.21254
-
La Carrubba, V.; Piccarolo, S.; Brucato, V. Solidification of syndiotactic polystyrene by a continuous cooling transformation approach J. Polym. Sci., Part B: Polym. Phys. 2007, 45, 2688-2699 (Pubitemid 47477630)
-
(2007)
Journal of Polymer Science, Part B: Polymer Physics
, vol.45
, Issue.19
, pp. 2688-2699
-
-
La Carrubba, V.1
Piccarolo, S.2
Brucato, V.3
-
10
-
-
0002466041
-
On the simulation of thermoplastic injection-molding process
-
Titomanlio, G.; Speranza, V.; Brucato, V. On the simulation of thermoplastic injection-molding process Int. Polym. Process. 1995, 10, 55-61
-
(1995)
Int. Polym. Process.
, vol.10
, pp. 55-61
-
-
Titomanlio, G.1
Speranza, V.2
Brucato, V.3
-
11
-
-
0002506814
-
On the simulation of thermoplastic injection moulding process: II Relevance of interaction between flow and crystallization
-
Titomanlio, G.; Speranza, V.; Brucato, V. On the simulation of thermoplastic injection-molding process 2. Relevance of interaction between flow and crystallization Int. Polym. Process. 1997, 12, 45-53 (Pubitemid 127531046)
-
(1997)
International Polymer Processing
, vol.12
, Issue.1
, pp. 45-53
-
-
Titomanlio, G.1
Speranza, V.2
Brucato, V.3
-
12
-
-
0035516741
-
Relevance of mold-induced thermal boundary conditions and cavity deformation in the simulation of injection molding
-
DOI 10.1002/pen.10898
-
Pantani, R.; Speranza, V.; Titomanlio, G. Relevance of mould-induced thermal boundary conditions and cavity deformation in the simulation of injection moulding Polym. Eng. Sci. 2001, 41, 2022-2035 (Pubitemid 34005152)
-
(2001)
Polymer Engineering and Science
, vol.41
, Issue.11
, pp. 2022-2035
-
-
Pantani, R.1
Speranza, V.2
Titomanlio, G.3
-
13
-
-
77749268096
-
Analysis of Shrinkage Development of a Semicrystalline Polymer during Injection Molding
-
De Santis, F.; Pantani, R.; Speranza, V.; Titomanlio, G. Analysis of Shrinkage Development of a Semicrystalline Polymer during Injection Molding Ind. Eng. Chem. Res. 2010, 49, 2469-2476
-
(2010)
Ind. Eng. Chem. Res.
, vol.49
, pp. 2469-2476
-
-
De Santis, F.1
Pantani, R.2
Speranza, V.3
Titomanlio, G.4
-
14
-
-
27844551248
-
Modeling of morphology evolution in the injection molding process of thermoplastic polymers
-
DOI 10.1016/j.progpolymsci.2005.09.001, PII S0079670005001176
-
Pantani, R.; Coccorullo, I.; Speranza, V.; Titomanlio, G. Modeling of morphology evolution in the injection molding process of thermoplastic polymers Prog. Polym. Sci. 2005, 30, 1185-1222 (Pubitemid 41655103)
-
(2005)
Progress in Polymer Science (Oxford)
, vol.30
, Issue.12
, pp. 1185-1222
-
-
Pantani, R.1
Coccorullo, I.2
Speranza, V.3
Titomanlio, G.4
-
15
-
-
79951792498
-
Crystallization of syndiotactic polystyrene under high pressure and cooling rate
-
Sorrentino, A.; Pantani, R.; Titomanlio, G. Crystallization of syndiotactic polystyrene under high pressure and cooling rate Macromol. Res. 2010, 18, 1045-1052
-
(2010)
Macromol. Res.
, vol.18
, pp. 1045-1052
-
-
Sorrentino, A.1
Pantani, R.2
Titomanlio, G.3
-
16
-
-
77954960239
-
Two-phase crystallization kinetics for syndiotactic polystyrene
-
Sorrentino, A.; Pantani, R.; Titomanlio, G. Two-phase crystallization kinetics for syndiotactic polystyrene J. Polym. Sci., Part B: Polym. Phys. 2010, 48, 1757-1766
-
(2010)
J. Polym. Sci., Part B: Polym. Phys.
, vol.48
, pp. 1757-1766
-
-
Sorrentino, A.1
Pantani, R.2
Titomanlio, G.3
-
17
-
-
2342444321
-
Molecular orientation in injection molding: Experiments and analysis
-
DOI 10.1007/s00397-003-0325-8
-
Pantani, R.; Sorrentino, A.; Speranza, V.; Titomanlio, G. Molecular orientation in injection molding: Experiments and analysis Rheol. Acta 2004, 43, 109-118 (Pubitemid 38554928)
-
(2004)
Rheologica Acta
, vol.43
, Issue.2
, pp. 109-118
-
-
Pantani, R.1
Sorrentino, A.2
Speranza, V.3
Titomanlio, G.4
-
18
-
-
0242546029
-
A simple method for the assessment of molecular orientation in transparent plastics moldings
-
Hemsley, D. A.; Robinson, A. M. A simple method for the assessment of molecular orientation in transparent plastics moldings Polym. Test. 1992, 11, 373-385
-
(1992)
Polym. Test.
, vol.11
, pp. 373-385
-
-
Hemsley, D.A.1
Robinson, A.M.2
-
20
-
-
0030563716
-
Structural gradients developed in injection-molded syndiotactic polystyrene (sPS)
-
Ulcer, Y.; Cakmak, M.; Miao, J.; Hsiung, C. M. Structural gradients developed in injection-molded syndiotactic polystyrene (sPS) J. Appl. Polym. Sci. 1996, 60, 669-691 (Pubitemid 126539115)
-
(1996)
Journal of Applied Polymer Science
, vol.60
, Issue.5
, pp. 669-691
-
-
Ulcer, Y.1
Cakmak, M.2
Miao, J.3
Hsiung, C.M.4
-
21
-
-
0029326005
-
Morphological characterization of injection moulded syndiotactic polystyrene
-
Lopez, L. C.; Cieslinski, R. C.; Putzig, C. L.; Wesson, R. D. Morphological characterization of injection moulded syndiotactic polystyrene Polymer 1995, 36, 2331-2341
-
(1995)
Polymer
, vol.36
, pp. 2331-2341
-
-
Lopez, L.C.1
Cieslinski, R.C.2
Putzig, C.L.3
Wesson, R.D.4
-
22
-
-
0030785999
-
The structure and morphology of syndiotactic polystyrene injection molded coupons
-
Evans, A. M.; Kellar, J. C.; Knowles, J.; Galiotis, C.; Carriere, C. J.; Andrews, E. H. The structure and morphology of syndiotactic polystyrene injection molded coupons Polym. Eng. Sci. 1997, 37, 153-165 (Pubitemid 127602239)
-
(1997)
Polymer Engineering and Science
, vol.37
, Issue.1
, pp. 153-165
-
-
Evans, A.M.1
Kellar, E.J.C.2
Knowles, J.3
Galiotis, C.4
Carriere, C.J.5
Andrews, E.H.6
-
23
-
-
0029212232
-
The assessment of orientation, stress and density distributions in injection-molded amorphous polymers by optical techniques
-
Wimberger-Friedl, R. The assessment of orientation, stress and density distributions in injection-molded amorphous polymers by optical techniques Prog. Polym. Sci. 1995, 20, 369-401
-
(1995)
Prog. Polym. Sci.
, vol.20
, pp. 369-401
-
-
Wimberger-Friedl, R.1
-
24
-
-
22344437259
-
Pressure effect on viscosity for atactic and syndiotactic polystyrene
-
DOI 10.1007/s00289-005-0397-y
-
Pantani, R.; Sorrentino, A. Pressure effect on viscosity for atactic and syndiotactic polystyrene Polym. Bull. 2005, 54, 365-376 (Pubitemid 40997628)
-
(2005)
Polymer Bulletin
, vol.54
, Issue.4-5
, pp. 365-376
-
-
Pantani, R.1
Sorrentino, A.2
-
25
-
-
67349234911
-
Pressure dependent viscosity and free volume of atactic and syndiotactic polystyrene
-
Sorrentino, A.; Pantani, R. Pressure dependent viscosity and free volume of atactic and syndiotactic polystyrene Rheol. Acta 2009, 48, 467-478
-
(2009)
Rheol. Acta
, vol.48
, pp. 467-478
-
-
Sorrentino, A.1
Pantani, R.2
-
26
-
-
33846583614
-
Kinetics of melting and characterization of the thermodynamic and kinetic properties of syndiotactic polystyrene
-
DOI 10.1002/polb.21039
-
Sorrentino, A.; Pantani, R.; Titomanlio, G. Kinetics of melting and characterization of thermodynamic and kinetic properties of syndiotactic polystyrene J. Polym. Sci., Part B: Polym. Phys. 2007, 45, 196-207 (Pubitemid 46180320)
-
(2007)
Journal of Polymer Science, Part B: Polymer Physics
, vol.45
, Issue.2
, pp. 196-207
-
-
Sorrentino, A.1
Pantani, R.2
Titomanlio, G.3
-
27
-
-
26444532895
-
A novel apparatus for solidification of polymer samples under simultaneous high pressures and high cooling rates
-
Sorrentino, A.; Pantani, R.; Picarella, D.; Titomanlio, G. A novel apparatus for solidification of polymer samples under simultaneous high pressures and high cooling rates Rev. Sci. Instrum. 2005, 76, 083901-1-083901-5
-
(2005)
Rev. Sci. Instrum.
, vol.76
, pp. 0839011-0839015
-
-
Sorrentino, A.1
Pantani, R.2
Picarella, D.3
Titomanlio, G.4
-
28
-
-
17644393149
-
Validation of a model to predict birefringence in injection molding
-
DOI 10.1016/j.eurpolymj.2005.02.006, PII S001430570500073X
-
Pantani, R. Validation of a model to predict birefringence in injection molding Eur. Polym. J. 2005, 41, 1484-1492 (Pubitemid 40567605)
-
(2005)
European Polymer Journal
, vol.41
, Issue.7
, pp. 1484-1492
-
-
Pantani, R.1
|