-
1
-
-
33947272658
-
Evaluation of fibre bridging stress of short fatigue cracks in SCS-6/ Ti-15-3 composite
-
DOI 10.1111/j.1460-2695.2006.01079.x
-
Akiniwa, Y., Fujii, T., Kimura, H. & Tanaka, K. 2007 Evaluation of fibre bridging stress of short fatigue cracks in SCS-6/Ti-15-3 composite. Fatigue Fract. Eng. Mater. Struct. 30, 258-266. (doi:10.1111/j.1460-2695.2006. 01079.x) (Pubitemid 46416609)
-
(2007)
Fatigue and Fracture of Engineering Materials and Structures
, vol.30
, Issue.3
, pp. 258-266
-
-
Akiniwa, Y.1
Fujii, T.2
Kimura, H.3
Tanaka, K.4
-
2
-
-
0000733581
-
Experimental characterisation of fibre failure and its influence on crack growth resistance in fibre reinforced titanium metal matrix composites
-
Barney, C., Ibbotson, A. & Bowen, P. 1998 Experimental characterization of fibre failure and its influence on crack growth resistance in fibre reinforced titanium metal matrix composites. Mater. Sci. Tech. 14, 658-668. (doi:10.1179/026708398790290550) (Pubitemid 128501518)
-
(1998)
Materials Science and Technology
, vol.14
, Issue.7
, pp. 658-668
-
-
Barney, C.1
Ibbotson, A.R.2
Bowen, P.3
-
3
-
-
0001463467
-
Damage in aligned-fibre SiC/Al quantified using a laboratory X-ray tomographic microscope
-
(doi:10.1016/0010-4361(93)90165-5)
-
Breunig, T. M., Stock, S. R., Guvenilir, A., Elliott, J. C., Anderson, P. & Davis, G. R. 1993 Damage in aligned-fibre SiC/Al quantified using a laboratory X-ray tomographic microscope. Composites 24, 209-214. (doi:10.1016/0010-4361(93)90165-5)
-
(1993)
Composites
, vol.24
, pp. 209-214
-
-
Breunig, T.M.1
Stock, S.R.2
Guvenilir, A.3
Elliott, J.C.4
Anderson, P.5
Davis, G.R.6
-
4
-
-
0031397232
-
Determination of crack bridging stresses from crack opening displacements
-
(doi:10.1023/A:1007495331890)
-
Buchanan, D. J., John, R. & Johnson, D. A. 1997 Determination of crack bridging stresses from crack opening displacements. Int. J. Fract. 87, 101-117. (doi:10.1023/A:1007495331890)
-
(1997)
Int. J. Fract.
, vol.87
, pp. 101-117
-
-
Buchanan, D.J.1
John, R.2
Johnson, D.A.3
-
5
-
-
0024866705
-
Toughening by aligned, frictionally constrained fibres
-
(doi:10.1016/0022-5096(87)90006-8)
-
Budiansky, B. & Amaziago, J. C. 1989 Toughening by aligned, frictionally constrained fibres. J. Mech. Phys. Solids 37, 93-109. (doi:10.1016/0022-5096(87)90006-8)
-
(1989)
J. Mech. Phys. Solids
, vol.37
, pp. 93-109
-
-
Budiansky, B.1
Amaziago, J.C.2
-
6
-
-
0039239311
-
Micromodelling of effective stress intensities for bridged cracks in fiber-reinforced titanium metal-matrix composites
-
(doi:10.1016/0010-4361(93)90008-v)
-
Cardona, D. C., Barney, C. & Bowen, P. 1993 Micromodelling of effective stress intensities for bridged cracks in fiber-reinforced titanium metal-matrix composites. Composites 24, 122-128. (doi:10.1016/0010-4361(93) 90008-v)
-
(1993)
Composites
, vol.24
, pp. 122-128
-
-
Cardona, D.C.1
Barney, C.2
Bowen, P.3
-
7
-
-
0001137055
-
On matrix cracking in fiber reinforced ceramics
-
(doi:10.1016/0022-5096(93)90087-V)
-
Chiang, Y. C., Wang, A. S. D. & Chou, T. W. 1993 On matrix cracking in fiber reinforced ceramics. J. Mech. Phys. Solids 41, 1137-1154. (doi:10.1016/0022-5096(93)90087-V)
-
(1993)
J. Mech. Phys. Solids
, vol.41
, pp. 1137-1154
-
-
Chiang, Y.C.1
Wang, A.S.D.2
Chou, T.W.3
-
8
-
-
0010511515
-
Fatigue crack growth in a fibre-reinforced Ti MMC at ambient and elevated temperatures
-
(doi:10.1016/0010-4361(93)90166-6)
-
Cotterill, P. J. & Bowen, P. 1993 Fatigue crack growth in a fibre-reinforced Ti MMC at ambient and elevated temperatures. Composites 12, 214-221. (doi:10.1016/0010-4361(93)90166-6)
-
(1993)
Composites
, vol.12
, pp. 214-221
-
-
Cotterill, P.J.1
Bowen, P.2
-
9
-
-
0027684783
-
Matrix cracking in ceramic matrix composites
-
(doi:10.1111/j.1151-2916.1993.tb03972.x)
-
Danchaivijit, S. & Shetty, D. K. 1993 Matrix cracking in ceramic matrix composites. J. Am. Ceram. Soc. 76, 2497-2504. (doi:10.1111/j.1151-2916. 1993.tb03972.x)
-
(1993)
J. Am. Ceram. Soc.
, vol.76
, pp. 2497-2504
-
-
Danchaivijit, S.1
Shetty, D.K.2
-
10
-
-
51649136061
-
The micromechanics of fatigue crack growth at 25C in Ti-6Al-4V reinforced with SCS-6 fibers
-
(doi: 10.1007/BF02675564)
-
Davidson, D. L. 1992 The micromechanics of fatigue crack growth at 25C in Ti-6Al-4V reinforced with SCS-6 fibers. Metal Trans. 23A, 865-879.(doi: 10.1007/BF02675564)
-
(1992)
Metal Trans.
, vol.23 A
, pp. 865-879
-
-
Davidson, D.L.1
-
11
-
-
17644364378
-
Fast microtomography using high energy synchrotron radiation
-
(doi:10.1063/1.1884194)
-
Di Michiel, M., Merino, J. M., Fernandez-Carreiras, D., Buslaps, T., Honkimaki, V., Falus, P., Martins, T. & Svensson, O. 2005 Fast microtomography using high energy synchrotron radiation. Rev. Scient. Instrum. 76, 043702. (doi:10.1063/1.1884194)
-
(2005)
Rev. Scient. Instrum.
, vol.76
, pp. 043702
-
-
Di Michiel, M.1
Merino, J.M.2
Fernandez-Carreiras, D.3
Buslaps, T.4
Honkimaki, V.5
Falus, P.6
Martins, T.7
Svensson, O.8
-
13
-
-
0343889075
-
Specimen geometry effects on fiber bridging in composites
-
(eds J.-P. Bailon & J. I. Dickson), West Midlands, UK: Engineering Materials Advisory Services Ltd
-
Ghosn, L. J., Telesman, J. & Kantos, P. 1993 Specimen geometry effects on fiber bridging in composites. In Fatigue 93 (eds J.-P. Bailon & J. I. Dickson), pp. 1231-1238. West Midlands, UK: Engineering Materials Advisory Services Ltd.
-
(1993)
Fatigue
, vol.93
, pp. 1231-1238
-
-
Ghosn, L.J.1
Telesman, J.2
Kantos, P.3
-
14
-
-
0034444329
-
Metal matrix composites for aeroengines
-
Hooker, J. A. & Doorbar, P. J. 2000 Metal matrix composites for aeroengines. Mater. Sci. Tech. 16, 725-731. (doi: 10.1179/026708300101508414) (Pubitemid 32523359)
-
(2000)
Materials Science and Technology
, vol.16
, Issue.7-8
, pp. 725-731
-
-
Hooker, J.A.1
Doorbar, P.J.2
-
16
-
-
83455237248
-
Fibre bridging during high temperature fatigue crack growth in Ti/SiC composites
-
(doi:10.1016/j.actamat.2011.10.036)
-
Hung, Y.-C. & Withers, P. J. 2012 Fibre bridging during high temperature fatigue crack growth in Ti/SiC composites. Acta Mater. 60, 958-971. (doi:10.1016/j.actamat.2011.10.036)
-
(2012)
Acta Mater.
, vol.60
, pp. 958-971
-
-
Hung, Y.-C.1
Withers, P.J.2
-
17
-
-
57949083319
-
Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ
-
(doi:10.1016/j.actamat.2008.09.042)
-
Hung, Y.-C., Bennett, J. A., Michiel, M. D., Buffière, J.-Y., Doel, T. J. A., Bowen, P. & Withers, P. J. 2009 Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ. Acta Mater. 57, 590-599. (doi:10.1016/j.actamat.2008.09.042)
-
(2009)
Acta Mater.
, vol.57
, pp. 590-599
-
-
Hung, Y.-C.1
Bennett, J.A.2
Michiel, M.D.3
Buffière, J.-Y.4
Doel, T.J.A.5
Bowen, P.6
Withers, P.J.7
-
18
-
-
0012705260
-
Analysis of bridged fatigue cracks in unidirectional SCS6/ Ti24Al11Nb composites
-
(eds J.-P. Bailon & J. I. Dickson), West Midlands, UK: Engineering Materials Advisory Services Ltd
-
John, R., Jira, J. R., Larsen, J. M. & Ashbaugh, N. E. 1993 Analysis of bridged fatigue cracks in unidirectional SCS6/ Ti24Al11Nb composites. In Fatigue 93 (eds J.-P. Bailon & J. I. Dickson), pp. 1091-1096. West Midlands, UK: Engineering Materials Advisory Services Ltd.
-
(1993)
Fatigue
, vol.93
, pp. 1091-1096
-
-
John, R.1
Jira, J.R.2
Larsen, J.M.3
Ashbaugh, N.E.4
-
19
-
-
0348016803
-
Effect of stress and geometry on fatigue crack growth perpendicular to fibers in Ti-6Al-4V reinforced with unidirectional SiC fibers
-
John, R., Jira, J. R. & Larsen, J. M. 1998 Effect of stress & geometry on fatigue crack growth perpendicular to fibers in Ti-6Al-4V reinforced with unidirectional SiC fibers. In Composite materials: Fatigue & fracture (ed. R. B. Bucinell). ASTM Special Technical Publication Series, vol. 1330, pp. 122-144. West Conshohoken, PA: ASTM International. (Pubitemid 128604061)
-
(1998)
ASTM Special Technical Publication
, vol.1330
, pp. 122-144
-
-
John, R.1
Jira, J.R.2
Larsen, J.M.3
-
20
-
-
0030686843
-
The effect of interfacial strength on the response of Ti MMCs to single fibre push-out and transverse tensile testing
-
Kalton, A. F., Miracle, D. B. & Clyne, T. W. 1997 The effect of interfacial strength on the response of Ti MMCs to single fibre push-out and transverse tensile testing. Key Eng. Mater. 127-131, 659-670. (doi:10.4028/www.scientific.net/KEM.127-131.659) (Pubitemid 127601820)
-
(1997)
Key Engineering Materials
, vol.127-131
, pp. 659-670
-
-
Kalton, A.F.1
Miracle, D.B.2
Clyne, T.W.3
-
21
-
-
38749145197
-
Effect of increased interfacial strength on the fatigue crack growth resistance and crack opening displacement of β Ti21S/SCS 6 composites
-
DOI 10.1016/j.msea.2007.04.096, PII S0921509307007691
-
Kaya, F. & Bowen, P. 2008 Effect of increased interfacial strength on the fatigue crack growth resistance and crack opening displacement of beta Ti21S/SCS 6 composites. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 476, 301-307. (doi:10.1016/j.msea.2007.04.096) (Pubitemid 351176610)
-
(2008)
Materials Science and Engineering A
, vol.476
, Issue.1-2
, pp. 301-307
-
-
Kaya, F.1
Bowen, P.2
-
22
-
-
67651156275
-
Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources
-
(doi:10.1016/j.nima.2009.06.030)
-
Kyrieleis, A., Ibison, M., Titarenko, V. & Withers, P. J. 2009 Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources. Nucl. Instr. Meth. Phys. Res. A 607, 677-684. (doi:10.1016/j.nima.2009.06.030)
-
(2009)
Nucl. Instr. Meth. Phys. Res. A
, vol.607
, pp. 677-684
-
-
Kyrieleis, A.1
Ibison, M.2
Titarenko, V.3
Withers, P.J.4
-
23
-
-
84871025746
-
Overload effects on fatigue crack-tip fields under plane stress conditions: Surface and bulk analysis
-
(doi: 10.1111/j.1460-2695.2012.01670.x)
-
Lopez-Crespo, P., Withers, P. J., Yusof, F., Dai, H., Steuwer, A., Kelleher, J. F. & Buslaps, T. 2012 Overload effects on fatigue crack-tip fields under plane stress conditions: Surface and bulk analysis. Fatigue Fract. Eng. Mater. Struct. (doi: 10.1111/j.1460-2695.2012.01670.x)
-
(2012)
Fatigue Fract. Eng. Mater. Struct
-
-
Lopez-Crespo, P.1
Withers, P.J.2
Yusof, F.3
Dai, H.4
Steuwer, A.5
Kelleher, J.F.6
Buslaps, T.7
-
24
-
-
0026877848
-
Effects of fibre roughness on interface sliding in composites
-
(doi:10.1016/0956-7151(92)90424-D)
-
Mackin, T. J., Warren, P. D. & Evans, A. G. 1992 Effects of fibre roughness on interface sliding in composites. Acta Met. Mat. 40, 1251-1257. (doi:10.1016/0956-7151(92)90424-D)
-
(1992)
Acta Met. Mat.
, vol.40
, pp. 1251-1257
-
-
Mackin, T.J.1
Warren, P.D.2
Evans, A.G.3
-
25
-
-
0022152449
-
The mechanics of matrix cracking in a brittlematrix fiber composite
-
DOI 10.1016/0001-6160(85)90124-5
-
Marshall, D. B., Cox, B. N. & Evans, A. G. 1985 The mechanics of matrix cracking in a brittlematrix fiber composite. Acta Metall. 33, 2013-2021. (doi:10.1016/0001-6160(85)90124-5) (Pubitemid 16460094)
-
(1985)
Acta Metallurgica
, vol.33
, Issue.11
, pp. 2013-2021
-
-
Marshall, D.B.1
Cox, B.N.2
Evans, A.G.3
-
26
-
-
39849100765
-
Analysis of load transfer behaviour and determination of interfacial shear strength in single-fibre-reinforced titanium alloys
-
Matikas, T. E. 2007a Analysis of load transfer behaviour and determination of interfacial shear strength in single-fibre-reinforced titanium alloys. Adv. Compos. Lett. 16, 181-192. (Pubitemid 351313776)
-
(2007)
Advanced Composites Letters
, vol.16
, Issue.5
, pp. 181-192
-
-
Matikas, T.E.1
-
27
-
-
42449123668
-
Characterization of interphase environmental degradation at elevated temperature of fibre-reinforced titanium matrix composites
-
Matikas, T. E. 2007b Characterization of interphase environmental degradation at elevated temperature of fibre-reinforced titanium matrix composites. Adv. Compos. Lett. 16, 223-232. (Pubitemid 351561271)
-
(2007)
Advanced Composites Letters
, vol.16
, Issue.6
, pp. 223-232
-
-
Matikas, T.E.1
-
28
-
-
42649089439
-
High temperature fiber fragmentation characteristics of SiC single-fiber composite with titanium matrices
-
DOI 10.1163/156855108X295663
-
Matikas, T. E. 2008 High temperature fiber fragmentation characteristics of SiC single-fiber composite with titanium matrices. Adv. Compos. Mater. 17, 75-87. (doi:10.1163/156855108 x295663) (Pubitemid 351598511)
-
(2008)
Advanced Composite Materials
, vol.17
, Issue.1
, pp. 75-87
-
-
Matikas, T.E.1
-
30
-
-
0037125192
-
SiC single fibre full-fragmentation during straining in a Ti-6Al-4V matrix studied by synchrotron X-rays
-
PII S1359645402001349
-
Preuss, M., Withers, P. J., Maire, E. & Buffiere, J.-Y. 2002 SiC single fibre full-fragmentation during straining in a Ti-6Al-4V matrix studied by synchrotron X-rays. Acta Mater. 50, 3175-3190. (doi: 10.1016/S1359-6454(02) 00134-9) (Pubitemid 34771963)
-
(2002)
Acta Materialia
, vol.50
, Issue.12
, pp. 3175-3190
-
-
Preuss, M.1
Withers, P.J.2
Maire, E.3
Buffiere, J.-Y.4
-
31
-
-
0037465239
-
Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites
-
(doi:10.1016/S1359-6454(02)00508-6)
-
Preuss, M., Rauchs, G., Doel, T., Steuwer, A., Bowen, P. & Withers, P. J. 2003 Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites. Acta Mater. 51, 1045-1057. (doi:10.1016/S1359- 6454(02)00508-6)
-
(2003)
Acta Mater.
, vol.51
, pp. 1045-1057
-
-
Preuss, M.1
Rauchs, G.2
Doel, T.3
Steuwer, A.4
Bowen, P.5
Withers, P.J.6
-
32
-
-
0036883768
-
Computational assessment of the influence of load ratio on fatigue crack growth in fibre-reinforced metal matrix composites
-
DOI 10.1016/S0142-1123(02)00047-6, PII S0142112302000476
-
Rauchs, G. & Withers, P. J. 2002 Computational assessment of the influence of load ratio on fatigue crack growth in fibre reinforced metal matrix composites. Int. J. Fatigue 24, 1205-1211. (doi:10.1016/S0142-1123(02)00047-6) (Pubitemid 35011246)
-
(2002)
International Journal of Fatigue
, vol.24
, Issue.12
, pp. 1205-1211
-
-
Rauchs, G.1
Withers, P.J.2
-
33
-
-
2042431271
-
Implications of interface friction for crack growth in fibre-reinforced metal matrix composites by three-dimensional finite element modelling
-
Rauchs, G., Thomason, P. F. & Withers, P. J. 2004 Implications of interface friction for crack growth in fibre-reinforced metal matrix composites by three dimensional finite element modelling. Int. J. Fract. 125, 281-305. (doi:10.1023/B:FRAC.0000022283.54186.65) (Pubitemid 38536468)
-
(2004)
International Journal of Fracture
, vol.125
, Issue.3-4
, pp. 281-305
-
-
Rauchs, G.1
Thomason, P.F.2
Withers, P.J.3
-
34
-
-
1542401316
-
The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites
-
(doi:10.1016/j.actamat.2003.11.024)
-
Sinclair, R., Preuss, M., Maire, E., Buffiere, J.-Y., Bowen, P. & Withers, P. J. 2004 The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites. Acta Mater. 52, 1423-1438. (doi:10.1016/j.actamat.2003.11.024)
-
(2004)
Acta Mater.
, vol.52
, pp. 1423-1438
-
-
Sinclair, R.1
Preuss, M.2
Maire, E.3
Buffiere, J.-Y.4
Bowen, P.5
Withers, P.J.6
-
35
-
-
17044410828
-
Imaging and strain mapping fibre by fibre in the vicinity of a fatigue crack in a Ti/SiC fibre composite
-
DOI 10.1179/174328005X14375
-
Sinclair, R., Preuss, M. & Withers, P. J. 2005 Imaging and strain mapping fibre by fibre in the vicinity of a fatigue crack in a Ti/SiC fibre composite. Mater. Sci. Tech. 21, 27-34. (doi:10.1179/174328005X14375) (Pubitemid 40493707)
-
(2005)
Materials Science and Technology
, vol.21
, Issue.1
, pp. 27-34
-
-
Sinclair, R.1
Preuss, M.2
Withers, P.J.3
-
36
-
-
78449263067
-
The evolution of crack-tip stresses during a fatigue overload event
-
(doi:10.1016/j.actamat.2010.03.013)
-
Steuwer, A., Rahman, M., Shterenlikht, A., Fitzpatrick, M. E., Edwards, L. & Withers, P. J. 2010 The evolution of crack-tip stresses during a fatigue overload event. Acta Mater. 58, 4039-4052. (doi:10.1016/j.actamat.2010. 03.013)
-
(2010)
Acta Mater.
, vol.58
, pp. 4039-4052
-
-
Steuwer, A.1
Rahman, M.2
Shterenlikht, A.3
Fitzpatrick, M.E.4
Edwards, L.5
Withers, P.J.6
-
37
-
-
0242334712
-
Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography
-
(doi:10.1080/147864303100015754)
-
Toda, H., Sinclair, I., Buffiere, J. Y., Maire, E., Connolley, T., Joyce, M., Khor, K. H. & Gregson, P. 2003 Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography. Phil. Mag. 83, 2429-2448. (doi:10.1080/147864303100015754)
-
(2003)
Phil. Mag.
, vol.83
, pp. 2429-2448
-
-
Toda, H.1
Sinclair, I.2
Buffiere, J.Y.3
Maire, E.4
Connolley, T.5
Joyce, M.6
Khor, K.H.7
Gregson, P.8
-
38
-
-
0028480127
-
Interfacial fatigue in a fiber reinforced metal matrix composite
-
(doi:10.1016/0956-7151(94)90208-9)
-
Walls, D. P. & Zok, F. W. 1994 Interfacial fatigue in a fiber reinforced metal matrix composite. Acta Metall. Mater. 42, 2675-2681. (doi:10.1016/0956-7151(94)90208-9)
-
(1994)
Acta Metall. Mater.
, vol.42
, pp. 2675-2681
-
-
Walls, D.P.1
Zok, F.W.2
-
39
-
-
0027628246
-
Mode I fatigue cracking in a fiber reinforced metal matrix composite
-
DOI 10.1016/0956-7151(93)90375-3
-
Walls, D. P., Bao, G. & Zok, F. W. 1993 Mode I fatigue cracking in a fiber reinforced metal matrix composite. Acta Metal. Mater. 41, 2061-2071. (doi:10.1016/0956-7151(93)90375-3) (Pubitemid 23688363)
-
(1993)
Acta metallurgica et materialia
, vol.41
, Issue.7
, pp. 2061-2071
-
-
Walls, D.P.1
Bao, G.2
Zok, F.W.3
-
40
-
-
84864983961
-
Titanium matrix composites
-
(eds B. Cantor, H. Assender & P. Grant),. Boca Raton, FL: CRC Press
-
Ward-Close, M., Godfrey, S. & Robertson, J. 2001 Titanium matrix composites. In Aerospace materials (eds B. Cantor, H. Assender & P. Grant), pp. 241-252. Boca Raton, FL: CRC Press.
-
(2001)
Aerospace Materials
, pp. 241-252
-
-
Ward-Close, M.1
Godfrey, S.2
Robertson, J.3
-
41
-
-
85136357190
-
Bearing pressures and cracks
-
Westergaard, H. M. 1939 Bearing pressures and cracks. Trans. ASME 61, A49-A53.
-
(1939)
Trans. ASME
, vol.61
-
-
Westergaard, H.M.1
-
42
-
-
84855918328
-
Metal-based composite materials for high temperature application
-
(eds R. Blockley & W. Shyy), New York, NY: Wiley
-
Withers, P. J. 2010 Metal-based composite materials for high temperature application. In Encyclopedia of aerospace engineering (eds R. Blockley & W. Shyy), pp. 1-10. New York, NY: Wiley.
-
(2010)
Encyclopedia of Aerospace Engineering
, pp. 1-10
-
-
Withers, P.J.1
-
43
-
-
83455208349
-
3D Crack-tip microscopy: Illuminating micro-scale effects on crack-tip behavior
-
(doi:10.1002/adem.201100092)
-
Withers, P. J. 2011 3D Crack-tip microscopy: Illuminating micro-scale effects on crack-tip behavior. Adv. Eng. Mater. 13, 1096-1100. (doi:10.1002/adem.201100092)
-
(2011)
Adv. Eng. Mater.
, vol.13
, pp. 1096-1100
-
-
Withers, P.J.1
-
44
-
-
0032203494
-
A neutron diffraction study of load partitioning in continuous Ti/SiC composites
-
PII S1359645498002973
-
Withers, P. J. & Clarke, A. P. 1998 A neutron diffraction study of load partitioning in continuous Ti/SiC composites. Acta Mater. 46, 6585-6598. (doi:10.1016/S1359-6454(98)00297-3) (Pubitemid 128412106)
-
(1998)
Acta Materialia
, vol.46
, Issue.18
, pp. 6585-6598
-
-
Withers, P.J.1
Clarke, A.P.2
-
45
-
-
0024765126
-
Application of the Eshelby method of internal stress determination to short fibre metal matrix composites
-
DOI 10.1016/0001-6160(89)90341-6
-
Withers, P. J., Stobbs, W. M. & Pedersen, O. B. 1989 The application of the Eshelby method of internal stress determination for short fibre metal matrix composites. Acta Met. 37, 3061-3084. (doi:10.1016/0001-6160(89)90341-6) (Pubitemid 20622880)
-
(1989)
Acta Metallurgica
, vol.37
, Issue.11
, pp. 3061-3084
-
-
Withers, P.J.1
Stobbs, W.M.2
Pedersen, O.B.3
-
46
-
-
33749581294
-
Crack opening displacements during fatigue crack growth in Ti-SiC fibre metal matrix composites by X-ray tomography
-
DOI 10.1179/174328406X114108
-
Withers, P. J., Bennett, J., Hung, Y.-C. & Preuss, M. 2006 Crack opening displacements during fatigue crack growth in Ti-SiC fibre metal matrix composites by X-ray tomography. Mater. Sci. Tech. 22, 1052-1058. (doi:10.1179/174328406X114108) (Pubitemid 44535919)
-
(2006)
Materials Science and Technology
, vol.22
, Issue.9
, pp. 1052-1058
-
-
Withers, P.J.1
Bennett, J.2
Hung, Y.-C.3
Preuss, M.4
-
47
-
-
80052778013
-
Interfacial shear strength behaviour of Ti/SiC metal matrix composites at room and elevated temperature
-
(doi:10.1016/j.actamat.2010.07.027)
-
Withers, P. J., Bennett, J. A. & Kuroda, M. 2010 Interfacial shear strength behaviour of Ti/SiC metal matrix composites at room and elevated temperature. Acta Mater. 58, 6090-6103. (doi:10.1016/j.actamat.2010.07.027).
-
(2010)
Acta Mater.
, vol.58
, pp. 6090-6103
-
-
Withers, P.J.1
Bennett, J.A.2
Kuroda, M.3
-
48
-
-
0021197744
-
Approximate weight functions for center and edge cracks in finite bodies
-
DOI 10.1016/0013-7944(84)90113-9
-
Wu, X. R. 1984 Approximate weight functions for center and edge cracks in finite bodies. Eng. Fract. Mech. 20, 35-49. (doi:10.1016/0013-7944(84)90113-9) (Pubitemid 14601930)
-
(1984)
Engineering Fracture Mechanics
, vol.20
, Issue.1
, pp. 35-49
-
-
Wu, X.R.1
-
49
-
-
0036753073
-
Interfacial bond strength and fracture energy at room and elevated temperature in titanium matrix composites (SCS-6/Timetal 834)
-
DOI 10.1016/S1359-835X(02)00089-1, PII S1359835X02000891
-
Zeng, W. D., Peters, P. W. M. & Tanaka, Y. 2002 Interfacial bond strength and fracture energy at room temperature and elevated temperature in titanium matrix composites (SCS-6/Timetal 834). Composites A33, 1159-1170. (doi:10.1016/S1359-835x(02)00089-1) (Pubitemid 35213917)
-
(2002)
Composites Part A: Applied Science and Manufacturing
, vol.33
, Issue.9
, pp. 1159-1170
-
-
Zeng, W.D.1
Peters, P.W.M.2
Tanaka, Y.3
|