Evaluation of fibre bridging stress of short fatigue cracks in SCS-6/ Ti-15-3 composite

Fatigue and Fracture of Engineering Materials and Structures

Volumn 30, Issue 3, 2007, Pages 258-266

  Akiniwa, Y ^a   Fujii, T ^a   Kimura, H ^a   Tanaka, K ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

Bridging stress; Fatigue; Metal matrix composite; SiC fibre; Synchrotron radiation; Titanium alloy

Indexed keywords

DEBONDING; FATIGUE CRACK PROPAGATION; FIBER REINFORCED METALS; SHIELDING; STRESS INTENSITY FACTORS;

BRIDGING STRESS; CRACK BRIDGING; INTERFACIAL FRICTIONAL STRESS;

METALLIC MATRIX COMPOSITES;

EID: 33947272658     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2006.01079.x     Document Type: Article

References (29)

1. Liaw, P. K., Diaz, E. S., Chiang, K. T. and Loh, D. H. (1995) Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites: Part 1. Tensile and fatigue behaviour. Metall. Mater. Trans. A 26A, 3225-3247.
2. Brett, R. L., Cotterill, P. J. and Bowen, P. (1996) The influence of loading level, temperature and environment on fibre failure during the fatigue of an SiC fibre reinforced Ti-MMC. Int. J. Fatigue 18, 1-8.
3. Wang, P. C., Jeng, S. M., Yang, J. M. and Mal, K. (1996) Fatigue life prediction of fibre-reinforced titanium matrix composites. Acta Mater. 44, 1097-1108.
4. Soboyejo, W. O. (1994) Investigation of the effects of matrix microstructure and interfacial properties on the fatigue and fracture behaviour of a Ti-15V-3Al-3Sn/SCS9 composite. Mater. Sci. Eng. A183, 49-58.
5. Marshall, D. B., Cox, B. N. and Evans, A. G. (1985) The mechanics of matrix cracking in brittle-matrix fibre composites. Acta metall. 33, 2013-2021.
6. Evans, A. G. and McMeeking, R. M. (1986) On the toughening of ceramics by strong reinforcements. Acta Metall. 34, 2435-2441.
7. Budiansky, B. and Amazigo, J. C. (1989) Toughening by aligned, frictionally constrained fibres. J. Mech. Phys. Solids 37, 93-109.
8. Cox, B. N. and Marshall, D. B. (1991) The determination of crack bridging forces. Int. J. Fract. 49, 159-176.
9. Ghosn, L. J., Kantzos, P. and Telesman, J. (1992) Modeling of crack bridging in a unidirectional metal matrix composite. Int. J. Fract. 54, 345-357.
10. Nguyen, T. H. and Yang, J. M. (1994) Elastic bridging for modeling fatigue crack propagation in a fibre-reinforced titanium matrix composite. Fatigue Fract. Engng Mater. Struct. 17, 119-131.
11. Akiniwa, Y., Tanaka, K., Takezono, T., Hayashi, M., Minakawa, N. and Morii, Y. (1998) Neutron and X-ray diffraction measurements of phase stresses in SiC particulate reinforced aluminum composite. J. Soci. Mater. Sci. Japan 47, 755-761.
12. Akiniwa, Y., Tanaka, K. Minakawa, N. and Morii, Y. (2000) Neutron diffraction study of thermal residual stress in ceramic composites. Mater. Sci. Res. Int. 6, 281-286.
13. Akiniwa, Y., Tanaka, K., Minagawa, N. and Morii, Y. (2001) Thermal residual stresses in ceramic composites measured by neutron diffraction. Mater. Sci. Res. Int. Special Technical Publication 1, 427-730.
14. Povirk, G. L., Stout, M. G., Bourke, M., Goldstone, J. A., Lawson, A. C., Lovato, M., Macewen, S. R., Nutt, S. R. and Needleman, A. (1992) Thermally and Mechanically induced residual strains in Al-SiC composites. Acta Metall. Mater. 40, 2391-2412.
15. Withers, P. J. and Clarke, A. P. (1998) A neutron diffraction study of load partitioning in continuous Ti/SiC composites. Acta Mater. 46, 6585-6598.
16. Akiniwa, Y., Tanaka, K. and Kimura, H. (2005) Measurement of Stress Distribution Near Fatigue Crack in Ultra-Fine Grained Steel by Synchrotron Radiation. Mater. Sci. Forum, 490-491, 118-123.
17. Maire, E., Owen, A., Buffiere, J.-Y. and Withers, P. J. (2001) A synchrotron X-ray study of a Ti/SiC f composite during in situ straining. Acta Mater. 49, 153-163.
18. Preuss, M., Withers, P. J., Maire, E. and Buffiere, J.-Y. (2002) SiC single fibre full-fragmentation during straining in a Ti-6Al-4V matrix studied by synchrotron X-rays. Acta Mater. 50, 3177-3192.
19. Preuss, M., Rauchs, G., Withers, P. J., Maire, E. and Buffiere, J.-Y. (2002) Interfacial shear strength of Ti/SiC fibre composites measured by synchrotron strain measurement, Composites Part A. App. Sci. Manufact. 33, 1381-1385.
20. Sinclair, R., Preuss, M., Maire, E., Buffiere, J.-Y., Bowen, P. and Withers, P. J. (2004) The effect of fibre fractures in the bridging zone of fatigue cracked Ti-6Al-4V/SiC fibre composites. Acta Mater. 52, 1423-1438.
21. Tanaka, K. and Akiniwa, Y. (1988) Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches. Eng. Fract. Mech. 30, 863-876.
22. Hilley, M. E. (ed.) (1971) Residual Stress Measurement by X-Ray Diffraction. SAE J784a, 14-16, Soc. of Auto. Engrs.
23. McCartney, L. N. (1987) Mechanics of matrix cracking in brittle-matrix fibre-reinforced composites. Proc. R. Soc. Lond. A409, 329-350.
24. Evans, A. G. (1991) The mechanical properties of reinforced ceramic, metal and intermetallic composites. Mater. Sci. Eng. A143, 63-76.
25. Chiu, H. P. and Yang, J. M. (1995) Effect of fibre coating on the fracture and fatigue resistance of SCS-6/Ti3Al composite. Acta Metall. Mater. 43, 2581-2587.
26. Akiniwa, Y., Zhang, L. M. and Tanaka, K. (1997) Prediction of theFatigue Limit of Cracked Specimens based on the Cyclic R-Curve Method. Fatigue Fract. Eng. Mater. Struct. 20, 1387-1398.
27. Bueckner, H. F. (1971) Weight functions for notched bar. Zeitschrift fuer angewandte Mathematik und Mechanik 51, 97-109.
28. Warren, P. D., Mackin, T. J. and Evance, A. G. (1992) Design, analysis and application of an improved push-through test for the measurement of interface properties in composites. Acta Metall. Mater. 40, 1243-1249.
29. Walls, D. P., Bao, G. and Zok, F. W. (1993) Mode I fatigue cracking in a fibre reinforced metal matrix composite. Acta Metall. Mater. 41, 2061-2071.