Submerged Membranes

Advanced Membrane Technology and Applications

Volumn , Issue , 2008, Pages 239-270

  Fane, Anthony G ^a,b,c  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

^b NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^c Australian Academy of Technological Sciences   (Australia)

Author keywords

Submerged membrane module geometries; Submerged membranes and two phase bubbly flow surface shear; Submerged membranes in advanced water and wastewater applications

Indexed keywords

EID: 84864772566     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470276280.ch10     Document Type: Chapter

References (39)

1. American Society for Testing and Materials (ASTM). (2006). Standard practice for integrity testing of water filtration membrane systems, revision 06. ASTM D 6908. ASTM, West Conshohocken, PA.
2. Benedek, A., and Cote, P. L. (2003). Long term experience with hollow fiber membrane bioreactors. In Proceedings IDAWorld Congress, Sept 28-Oct 3, 2003, Paradise Island, Bahamas, CDROM, ISBN 0-9745019-1-3.
3. Berube, P. R., and Lei, E. (2006). The effect of hydrodynamic conditions and system configurations on the permeate flux in a submerged hollow fiber system. J. Membr. Sci. 271(1-2), 29-37.
4. Chang, S., and Fane, A. G. (2000). Characteristics of microfiltration of suspensions with inter-fiber two-phase flow. J. Chem. Technol. Biotechnol. 75, 533-540.
5. Chang, S., and Fane, A. G. (2001). The effect of fibre diameter on filtration and flux distributionrelevance to submerged hollow fibre modules. J. Memb. Sci. 184(2), 221-231.
6. Chang, S., and Fane, A. G. (2002). Filtration of biomass with laboratory-scale submerged hollow fiber modules-Effect of operating conditions and module configuration. J. Chem. Technol. Biotechnol. 77, 1030-1038.
7. Chang, S., Fane, A. G., and Vigneswaran, S. (2002). Modeling and optimizing submerged hollow fiber membrane modules. AIChE J. 48(10), 2203-2212.
8. Chang, S., Yeo, A., Fane, A. G., Cholewa, M., Ping, Y., and Moser, M. (2007). Observation of flow characteristics in a hollow fiber lumen using non-invasive X-ray microimaging (XMI). J. Memb. Sci. 304(1-2), 181-189.
9. Childress, A., Le-Clech, P., Daugherty, J. L., Chen, C., and Leslie, G. (2005). Mechanical analysis of hollow fiber membrane integrity in water reuse applications. Desalination 180(1-3), 5-14.
10. Cornel, P., and Krause, S. (2003). State of the art of MBRs in Europe. Paper presented at Conference on Application and Perspective of MBRs in Wastewater Treatment and Reuse, Cremona, Italy, Apr. 28-29.
11. Cote, P. L., Smith, B. M., Deutschmann, A. A., Rodrigues, C. F., and Pedersen, S. K. (1994). Frameless array of hollow fiber membranes and method of maintaining clean fiber surfaces while filtering a substrate to withdraw a permeate, PCT WO 94/11094.
12. Cui, Z. F., Chang, S., and Fane, A. G. (2003). The use of gas bubbling to enhance membrane processes J. Membr. Sci. 221, 1-35.
13. DeCarolis, J. F., Hirani, Z., Adham, S. S., Tran, N., and Lagos, S. (2006). Commercially available membrane bioreactor systems. In S. S. Adham (Ed.), Proceedings of Short Course on Membrane Bioreactors. National Water Research Institute, Anaheim, pp. 11-17.
14. DiGiano, F. A., Andreottola, G., Adham, S. et al. (2004). Membrane bioreactor technology and sustainable water. Water Environ. Res. 76(3), 195-196.
15. Ducom, G., Puech, F. P., and Cabassud, C. (2002). Air sparging with flat-sheet nanofiltration: A link between wall shear stresses and flux enhancement. Desalination 145, 97-102.
16. DWI (2001). Review of the adequacy of existing proposals for membrane integrity monitoring. DWI Report 43/2/159. Available: www.dwi.gov.uk/reg/pdf/min.
17. Fane, A. G., Wei, X., and Wang, R. (2006). Membrane filtration processes and fouling. In G. Newcombe and D. Dixon (Eds.), Interface Science in Drinking Water Treatment:Fundamentals and Applications. Academic, New York, pp. 109-132.
18. Furukawa, D. (2006). Microfiltration and ultrafiltration: What's next? Paper presented at Microfiltration 4 Conference, National Water Research Institute, Anaheim, Mar. 20-21.
19. Futamura, D., Katoh, M., and Takeuchi, K. (1994). Organic waste water treatment by activated sludge process using integrated type membrane separation. Desalination 98, 17-25.
20. Gijsbertsen-Abrahamse, A. J., Cornelissen, E. R., and Hofmann, J. A. M. H. (2006). Fiber failure analysis and causes of hollow fiber integrity loss. Desalination 194, 251-258.
21. Guibert, D., Ben Aim, R., Rabie, H., and Cote, P. (2000). Aeration performance of immersed hollowfiber membranes in a bentonite suspension. Desalination 148, 395-400.
22. Ho, W. S., and Sirkar, K. K. (1992). Membrane Handbook. van Nostrand Reinhold, New York.
23. Judd, S. (2006). The MBR Book: Principles and Applications of Membrane Bioreactors in Water and Wastewater Treatment. Elsevier, New York.
24. Kim, J., and DiGiano, F. A. (2006). Defining critical flux in submerged membranes: Influence of length-distributed flux. J. Membr. Sci. 280, 752-761.
25. Le-Clech, P., Chen, V., and Fane, A. G. (2006). Fouling in membrane bioreactors used in wastewater treatment-A review. J. Membr. Sci. 284(1-2), 17-53.
26. Le-Clech, P., Fane, A. G., Leslie, G., and Childress, A. (2005, June). MBR focus: The operators perspective. Filtration and Separation, pp. 20-23.
27. Le-Clech, P., Jefferson, B., Chang, I. S., and Judd, S. J. (2003). Critical flux determination by the fluxstep method in a submerged membrane reactor. J. Membr. Sci. 227(1-2), 81-93.
28. Liu, R., Huang, X., Wang, C., Chen, L., and Qin, Y. (2000). Study on hydraulic characteristics in a submerged membrane bioreactor process. Process Biochem. 36, 249-254.
29. Madec, A. (2000). Influence d'un ecoulement diphasique sur les performances de filtration d'un procede a membranes immerges. PhD Thesis, L'Institut National Des Sciences Appliques De Toulouse.
30. Mallevialle, J., Odendaal, P. E., and Wiesner, M. R. (1996). Water Treatment Membrane Processes. McGraw-Hill, New York.
31. Mayer, M., Braun, R., and Fuchs, W. (2006). Comparison of various aeration devices for air sparging in crossflow membrane filtration. J. Memb. Sci. 277(1-2), 258-269.
32. Ndinisa, N. V., Fane, A. G., and Wiley, D. E. (2006). Fouling control in a submerged flat sheet membrane system, Part I-Bubbling and hydrodynamic effects. Separation Sci. Technol. 41(7), 1383-1410.
33. Ohkubo, K., Hayashi, T., and Nasgai, H. (1988). Hollow fiber filter device. U.S. Patent 4,876,006.
34. U.S. Environmental Protection Agency (EPA) (2006). Long term 2 enhanced water treatment rule. Available: www.epa.gov/safewater/disinfection.
35. Wang, Y., Brannock, M. W. D., Leslie, G. L., and Ong, K. W. (2008). Evaluation of membrane bioreactor performance via residence time distribution: effects of membrane configuration and mixing. Water Sci. Technol. 57(3), 353-359.
36. Wicaksana, F., Fane, A. G., and Chen, V. (2006). Fibre movement induced by bubbling using submerged hollow fibre membranes. J. Membr. Sci. 271(1-2), 186-195.
37. Yamamoto, K., Hiasa, M., Mahmood, T., and Matsuo, T. (1989). Direct solid-liquid separation using hollow fiber membrane in an activated sludge aeration tank. Water Sci. Technol. 21, 43-54.
38. Yeo, A. P. S., Law, A. W. K., and Fane, A. G. (2007). The relationship between performance of submerged hollow fibers and bubble-induced phenomena examined by particle image velocimetry. J. Memb. Sci. 304(1-2), 125-137.
39. Yusuf, C., and Moo-Young, M. (1993). Improve the performance of airlift reactors. Chem. Eng. Prog. 6, 38-45.