Elastohydrodynamic lubrication friction mapping - The influence of lubricant, roughness, speed, and slide-to-roll ratio

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 225, Issue 7, 2011, Pages 671-681

  Bjorling M ^a   Larsson, R ^a   Marklund, P ^a   Kassfeldt, E ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

EHL; Friction; Mapping; Roughness

Indexed keywords

ADDITIVE CONTENTS; BALL-ON-DISC TEST RIG; BASE OIL; EHL; EXTREME PRESSURE ADDITIVES; FRICTION BEHAVIOUR; FRICTION COEFFICIENTS; FRICTION MAPPING; FRICTION TEST; OIL TEMPERATURE; OPERATING TEMPERATURE; SLIDE-TO-ROLL RATIO;

ELASTOHYDRODYNAMICS; FRICTION; MAPPING; SURFACE PROPERTIES; SURFACE ROUGHNESS; TRIBOLOGY; VISCOSITY;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 79960218308     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650111403363     Document Type: Conference Paper

References (24)

1. Heingartner, P. and Mba, D. Determining power losses in the helical gear mesh. Gear Technol., 2005, 22(5), 32-37. (Pubitemid 44727222)
2. Changenet, C. Power loss predictions in geared transmissions using thermal networks-applications to a six-speed manual gearbox. J. Mech. Des., Trans. ASME, 2006, 128, 618-625.
3. Petry-Johnson, T., Kahraman, A., Anderson, N., and Chase, D. An experimental investigation of spur gear efficiency. J. Mech. Des., 2008,130, 62601-1-62601-10.
4. Dowson, D. and Higginson, G. Elastohydrodynamic lubrication, the fundamentals of roller and gear lubrication, 1966 (Pergamon, Oxford).
5. Gu, A. Elastohydrodynamic lubrication of involute gears. J. Eng. Ind., 1973, 95(4), 1164-1170.
6. Akbarzadeh, S. and Khonsari, M. Performance of spur gears considering surface roughness and shear thinning lubricant. J. Tribol, 2008, 130, 021503.1-021503.8.
7. Johnson, K., Greenwood, J., and Poon, S. A simple theory of asperity contact in elastohydrodynamic lubrication. Wear, 1972, 19(1), 91-108.
8. Greenwood, J. and Tripp, J. The contact of two nominally flat rough surfaces. Proc. Instn Mech. Engrs, 1971, 185, 625-633.
9. Akbarzadeh, S. and Khonsari, M. M. Thermoelastohydrodynamic analysis of spur gears with consideration of surface roughness. Tribol. Lett., 2008, 32, 129-141.
10. Castro, J. and Seabra, J. Coefficient of friction in mixed film lubrication: gears versus twin-discs. Proc. IMechE, Part J: J. Engineering Tribology, 2007, 221(3), 399-411. (Pubitemid 46929784)
11. Höhn, B.-R., Michaelis, K., and Doleschel, A. Frictional behaviour of synthetic gear lubricants. Tribology Series, 2001, 39, 759-768. (Pubitemid 32926311)
12. Martins, R., Seabra, J., Brito, A., Seyfert, C, Luther, R., and Igartua, A. Friction coefficient in FZG gears lubricated with industrial gear oils: biodegradable ester vs. mineral oil. Tribol. Int., 2006, 39(6), 512-521. (Pubitemid 43152357)
13. Martins, R., Cardoso, N., Bock, H., Igartua, A., and Seabra, J. Power loss performance of high pressure nitrided steel gears. Tribol. Int., 2009, 42(11-12), 1807-1815.
14. Amaro, R., Martins, R., Seabra, J., Yang, S., Teer, D., and Renevier, N. Carbon/chromium low friction surface coating for gears application. Ind. Lubr. Tribol, 2005, 57(6), 233-242. (Pubitemid 41563616)
15. Kleemola, J. and Lehtovaara, A. Experimental evaluation of friction between contacting discs for the simulation of gear contact. Tribotest, 2007, 13(1), 13-20. (Pubitemid 46189483)
16. Kleemola, J. and Lehtovaara, A. Experimental simulation of gear contact along the line of action. Tribol. Int., 2009, 42(10), 1453-1459.
17. Lord, J. and Larsson, R. Film-forming capability in rough surface EHL investigated using contact resistance. Tribol. Int., 2008, 41(9-10), 831-838.
18. Xu, H. Development of a generalized mechanical efficiency prediction methodology for gear pairs. PhD Thesis, 2005 (Graduate School of the Ohio State University).
19. Habchi, W., Eyheramendy, D., Bair, S., Vergne, P., and Morales-Espejel, G. Thermal elastohydrodynamic lubrication of point contacts using a Newtonian/generalized Newtonian lubricant. Tribol. Lett., 2008, 30(1), 41-52.
20. Johnson, K. and Tevaarkwerk, J. Shear behaviour of elastohydrodynamic oil films. Proc. R. Soc. Lond. A, Math. Phys. Sci, 1977, A356, 215-236. (Pubitemid 8545868)
21. Wikstrom, V. and Hoglund, E. Investigation of parameters affecting the limiting shear stress-pressure coefficient: a new model incorporating temperature. J. Tribol, 1994, 116(3), 612-620. (Pubitemid 283139)
22. Larsson, R., Larsson, P., Eriksson, E., Sjoberg, M., and Hoglund, E. Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses. Proc. IMech, Part J: J. Engineering Tribology, 2000, 214(1), 17-27.
23. Chou, C. and Lin, J. A new approach to the effect of EP additive and surface roughness on the pitting fatigue of a line contact system. J. Tribology, 2002, 124(2), 245-258. (Pubitemid 34455541)
24. Höglund, E. Influence of lubricant properties on elastohydrodynamic lubrication. Wear, 1999, 232(2), 176-184. (Pubitemid 30031732)