Low-power circuits for the wireless ligament balance measurement system in TKA

Analog Integrated Circuits and Signal Processing

Volumn 72, Issue 2, 2012, Pages 293-302

  Chen, Hong ^a   Zhang, Xu ^b   Liu, Ming ^a   Hao, Wenhan ^c   Jia, Chen ^a   Jiang, Hanjun ^a   Zhang, Chun ^a   Wang, Zhihua ^a  

^a TSINGHUA UNIVERSITY   (China)

^b INSTITUTE OF SEMICONDUCTORS   (China)

^c ANALOG DEVICES INC   (United States)

Author keywords

Integrated circuit; Ligament balance; Power circuit; Sub threshold; Total knee arthroplasty (TKA)

Indexed keywords

8-BIT MICROPROCESSORS; BALANCE MEASUREMENT; BATTERY APPLICATIONS; CMOS PROCESSS; DYNAMIC POWER; FORCE SENSOR; KNEE JOINT; LEAKAGE POWER; LOW-POWER CIRCUIT; LOW-POWER SYSTEMS; MEASURING SYSTEMS; OPERATING VOLTAGE; POWER CIRCUIT; REAL TIME; RF TRANSCEIVERS; SENSORS ARRAY; SUBTHRESHOLD; SUPPLY VOLTAGES; TESTING RESULTS; TOTAL KNEE ARTHROPLASTY; VOLTAGE SUPPLY;

APPLICATION SPECIFIC INTEGRATED CIRCUITS; CMOS INTEGRATED CIRCUITS; DATA COMMUNICATION SYSTEMS; ELECTROSTATIC DEVICES; INTEGRATED CIRCUITS; JOINTS (ANATOMY); MEASUREMENTS; MICROPROCESSOR CHIPS; SENSOR ARRAYS; SIGNAL CONDITIONING CIRCUITS; SPACE OPTICS; THRESHOLD VOLTAGE;

ARTHROPLASTY;

EID: 84864571709     PISSN: 09251030     EISSN: 15731979     Source Type: Journal    
DOI: 10.1007/s10470-011-9800-9     Document Type: Article

References (31)

1. Platt, S. R., Farritor, S., & Haider, H. (2005). On low-frequency electric power generation with PZT ceramics. ITTT/ASME Transactions on Mechatronics, 10(2), 240-252.
2. Chen, H., Chen, J., Chen, Y., Liu, M., Zhang, C., Wang, Z. (2008). A Low-Power IC Design for the Wireless Monitoring System of the Orthopedic Implants. In Proceeding of 2008 custom integrated circuits conference (CICC2008) (pp. 363-366). San Jose, September 21-24.
3. Almouahed, S., Gouriou, M., Hamitouche, C., Stindel, E., & Roux, C. (2011). Design and evaluation of instrumented smart knee implant. IEEE Transactions on Biomedical Engineering, 58(4), 971-982.
4. Insall, J. N., Binazzi, R., Soudry, M., & Mestriner, L. A. (1985). Total knee arthroplasty. Clinical Orthopaedics and Related Research, 192, 13-22.
5. Dorr, L. D., & Boiardo, R. A. (1986). Technical considerations in total knee arthroplasty. Clinical Orthopaedics and Related Research, 205, 5-11.
6. Wasielewski, R. C., & Komistek, R. D. (2007). Computerassisted ligament balancing of the femoral tibial joint using pressure sensors. In J. B. Stiehl, W. H. Konermann, R. G. Haaker, & A. M. DiGioia (Eds.), Navigation and MIS in orthopedic surgery (pp. 175-181). Springer: Heidelberg.
7. Viskontas, D. G., Skrinskas, T. V., Johnson, J. A., King, G. J., Winemaker, M. J., & Chess, D. G. (2007). Computer-assisted gap equalization in total knee arthroplasty. The Journal of Arthroplasty, 22(3), 334-342.
8. Winemaker, M. J. (2002). Perfect balance in total knee arthroplasty: The elusive compromise. The Journal of Arthroplasty, 17(1), 2-10.
9. Morris, B. A., D'Lima, D. D., Slamin, J., Kovacevic, N., Arms, S. W., Townsend, C. P., et al. (2001). e-knee: Evolution of the electronic knee prosthesis-telemetry technology development. The Journal of Bone and Joint Surgery, 83-A, 62-66.
10. Takahashi, T., Wada, Y., & Yamamoto, H. (1997). Soft-tissue balancing with pressure distribution during total knee arthroplasty. The Journal of Bone and Joint Surgery, 79(2), 235-239.
11. Wallace, A. L., Harris, M. L., Walsh, W. R., & Bruce, W. J. M. (1998). Intraoperative assessment of tibiofemoral contact stresses in total knee arthroplasty. The Journal of Arthroplasty, 13(8), 923-927.
12. Crottet, D., Maeder, T., Fritschy, D., Bleuler, H., Nolte, L.-P., & Pappas, I. P. (2005). Development of a force amplitude-andlocation-sensing device designed to improve the ligament balancing procedure in TKA. IEEE Transactions on Biomedical Engineering, 52, 1609-1611.
13. Wasielewski, R. C., Galat, D. D., & Komistek, R. D. (2004) An intraoperative pressure-measuring device used in total knee arthoplasties and its kinematics correlations. Clinical Orthopaedics and Related Research, 427, 171-178.
14. Wasielewski, R. C., Galat, D. D., & Komistek, R. D. (2005). Correlation of compartment pressure data from an intraoperative sensing device with postoperative fluoroscopic kinematic results in TKA patients. Journal of Biomechanics, 38, 333-339.
15. Le, T. T., Han, J., von Jouanne, A., et al. (2006). Piezoelectric micro-power generation interface circuits. IEEE Journal of Solid-State Circuits, 41(6), 1411-1420.
16. Taylor, S. J. G., & Walker, P. S. (2001). Forces and moments telemetered from two distal femoral replacements during various activities. Journal of Biomechanics, 34, 839-848.
17. Gerrish, P.,Herrmann, E., Tyler, L.,&Walsh,K. (2005). Challenges and Constraints in Designing Implantable Medical ICs. IEEE Transactions on Device and Materials Reliability, 5(3), 435-444.
18. Chen, H., Liu, M., Hao, W., Chen, Y., Zhang, C., & Wang, Z. (2009). Low-power circuits for the bidirectional wireless monitoring system of the orthopedic implants. IEEE Transactions on Biomedical Circuits and Systems, 3(6), 437-443.
19. Chen, H., Liu, M., Jia, C., & Wang, Z. (2009). Power Harvesting Using PZT Ceramics in Orthopedic Implants. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 56(9), 2010-2014.
20. Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2008). A piezo-powered floating-gate sensor array for long-term fatigue monitoring in biomechanical implants. IEEE Transactions on Biomedical Circuits and Systems, 2(3), 164-172.
21. Claes, W., Sansen, W., & Puers, R. (2002). A 40 μA/channel compensated 18-channel strain gauge measurement system for stress monitoring in dental implants. IEEE Journal of Solid-State Circuits, 37, 293-301.
22. Wenchao, Q., Islam, S. K., Mahfouz, M. R., Haider, M. R., Gary, T., Mostafa, S., et al. (2010). Microcantilever array pressure measurement system for biomedical instrumentation. IEEE Sensors Journal, 10(2), 321-330.
23. Mohamed El-Nozahi, Ahmed Amer, Joselyn Torres,et al. (2009). A 25 mA 0.13 lm CMOS LDO regulator with power-supply rejection better than -56 dB up to 10 MHz using a feedforward ripple-cancellation technique (pp. 330-332). IEEE Solid-State Circuits Conference (ISSCC'2009), San Francisco.
24. Lam, Y.-H.,&Ki,W.-H. (2008).A0.9 V0.35 lmAdaptively-Biased CMOS LDORegulator with Fast Transient Response (pp. 442-444). IEEE Solid-State Circuits Conference (ISSCC'2008), Analog Tech.
25. Hao, W., Chen J., Chen H., Zhang C., & Wang, Z. (2009). Variable ratio step-down switched capacitor DC-DC converter in WMSoOI. Journal of Semiconducotors 30(12), 1-5.
26. Hanjun, J., Li, F., Chen, X., Ning, Y., Xu, Z., Zhang, B., Ma, T., Wang, Z. (2010). A SoC with 3.9 mW 3 Mbps UHF transmitter and 240 lW MCU for capsule endoscope with bidirectional communication (pp 1-4(9-3)). Beijing: 2010 IEEE Asian Solid State Circuits Conference (A-SSCC), 8-10 Nov.
27. ADS1234 datasheet. Retrieved from http://www.ti.com/cn/lit/gpn/ads1234.
28. AD7794 datasheet. Retrieved from http://www.analog.com/static/imported- files/data-sheets/AD7794-7795.pdf
29. UTI datasheet. Retrieved from http://www.smartec.nl/pdf/DSUTI.pdf.
30. FSS15000NGT datasheet. Retrieved from http://sensing.honey well.com/index.cfm/ci-id/156199/la-id/1/document/1/re-id/0
31. Makowski, M.S., Maksimovic, D. (1995). PESC'95 Record, 26th Annual IEEE(2), Atlanta, pp 1215-1221.