Microcantilever array pressure measurement system for biomedical instrumentation

IEEE Sensors Journal

Volumn 10, Issue 2, 2010, Pages 321-330

  Qu, Wenchao ^a   Islam, Syed Kamrul ^a   Mahfouz, Mohamed R ^b   Haider, Mohammad R ^a   To, Gary ^b   Mostafa, Salwa ^a  

^a University of Tennessee   (United States)

^b The Center for Musculoskeletal Research   (United States)

Author keywords

Analog multiplexer; Analog to digital conversion (ADC); Instrumentation amplifier; Sample and hold

Indexed keywords

ANALOG MULTIPLEXER; ANALOG SIGNAL PROCESSING; BIOMEDICAL APPLICATIONS; BIOMEDICAL INSTRUMENTATION; CURRENT REFERENCE; DIGITAL CONTROL UNITS; INSTRUMENTATION AMPLIFIER; MEASUREMENT RANGE; METAL CMOS PROCESS; MICROCANTILEVER ARRAYS; ON CHIPS; PRESSURE MEASUREMENT SYSTEM; ROOT-SUM-SQUARE; SAMPLE-AND-HOLD; SAMPLE-AND-HOLD CIRCUITS; SIGNAL TO NOISE AND DISTORTION RATIO; SPURIOUS-FREE DYNAMIC RANGE; SUCCESSIVE APPROXIMATION REGISTER ANALOG-TO-DIGITAL CONVERTER;

ANALOG TO DIGITAL CONVERSION; APPLICATION SPECIFIC INTEGRATED CIRCUITS; APPROXIMATION THEORY; ATOMIC FORCE MICROSCOPY; CIRCUIT THEORY; COMPOSITE MICROMECHANICS; DIGITAL CONTROL SYSTEMS; INSTRUMENTS; INTEGRATED CIRCUITS; MULTICARRIER MODULATION; MULTIPLEXING; MULTIPLEXING EQUIPMENT; PRESSURE MEASUREMENT; PRESSURE SENSORS; SIGNAL PROCESSING; TIME VARYING SYSTEMS;

MEASUREMENTS;

EID: 73849116738     PISSN: 1530437X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JSEN.2009.2034134     Document Type: Article

References (31)

1. G. Bergmann, F. Graichen, and A. Rohlmann, "Instrumentation of a hip joint prosthesis, " Implantable Telemetry in Orthopaedics, pp. 35-63, 1990.
2. F. Graichen and G. Bergmann, "Four-channel telemetry system for in vivo measurement of hip joint forces, " J. Biomed. Eng., vol. 13, pp. 370-374, 1991.
3. D. D. D'Lima, C. P. Townsend, S. W. Arms, B. A. Morris, and C. W. Colwell, Jr., "An implantable telemetry device to measure intraarticular tibial forces, " J. Biomech., vol. 38, pp. 299-304, 2005.
4. W. Claes, W. Sansen, and R. Puers, "A 40 μA/channel compensated 18-channel strain gauge measurement system for stress monitoring in dental implants, " IEEE J. Solid-State Circuits, vol.37, pp. 293-301,
5. G. To, "Development of the Telemetrical Intraoperative soft tissues tension monitoring system in total knee replacement (TKR) with MEMS and ASIC Technologies, " M. Sc. thesis, Department of MABE, Univ. Tennessee, Knoxville, TN, Dec. 2007.
6. D. T. Davy, G.M. Kotzar, R. H. Brown, K. G. Heiple, V. M. Goldberg, K. G. Heiple, Jr., J. Berilla, and A. H. Burstein, "Telemetric force measurements across the hip after total arthroplasty, " J. Bone Joint Surg. Amer., vol. 70, pp. 45-50, 1988.
7. G. M. Kotzar, D. T. Davy, V. M. Goldberg, K. G. Heiple, J. Berilla, K. G. Heiple, Jr, R. H. Brown, and A. H. Burstein, "Telemeterized in vivo hip joint force data: A report on two patients after total hip surgery, " J. Orthop. Res., vol.9, pp. 621-633, 1991.
8. W. Claes, W. Sansen, and R. Puers, Design of Wireless Autonomous Datalogger IC's. New York: Springer, 2005.
9. E. J. Bassey, J. J. Littlewood, and S. J. G. Taylor, "Relations between compressive axial forces in an instrumented massive femoral implant, ground reaction forces, and integrated electromyographs from vastus lateralis during various psteogenic exercises, " J. Biomechanics, vol.30, pp. 213-223, 1997.
10. S. J. G. Taylor and P. S. Walker, "Forces and momemts telemetered from two distal femoral replacements during various activities, " J. Biomechanics, vol.34, pp. 839-848, 2001.
11. S. J. G. Taylor, P. S.Walker, J. S. Perry, S. R. Cannon, and R.Woledge, "The forces in the distal femur and the knee during walking and other activities measured by telemetry, " J. Arthoplasty, vol.13, pp. 428-437, 1998.
12. K. R. Kaufman, N. Kovacevic, S. E. Irby, and C. W. Colwell, "Instrumented implant for measuring tibiofemoral forces, " J. Biomechanics, vol.29, pp. 667-671, 1996.
13. B. A. Morris, D. D. D'Lima, J. Slamin, N. Kovacevic, S. W. Arms, C. P. Townsend, and C. W. Colwell, "e-Knee: Evolution of the electronics knee prosthesis: Telemetry technology development, " J. Bone Joint Sur., vol. 83A, no. Suppl 2, pp. 62-66, 2001.
14. D. D. D'Lima, C. P. Townsend, S. W. Arms, B. A. Morris, and C. W. Colwell, "An implantable telemetry device to measure intra-articular tibial forces, " J. Biomechanics, vol.38, pp. 299-304, 2005.
15. A. L. Wallace, M. L. Harris, W. R. Walsh, and J. M. Bruce, "Intraoperative assessment of tibiofemoral contact stresses in total knee arthoplasy, " J. Arthoplasty, vol.13, pp. 923-927, 1998.
16. R. C. Wasielewski, D. D. Galat, and R. D. Komistek, "An intraoperative pressure-measuring device used in total knee arthoplasties and its kinematics correlations, " Clinical Orthopaedics and Related Res., no.427, pp. 171-178, 2004.
17. R. C. Wasielewski, D. D. Galat, and R. D. Komistek, "Correlation of compartment pressure data from an intraoperative sensing device with postoperative fluoroscopic kinematic results in TKA patients, " J. Biomechanics, vol.38, pp. 333-339, 2005.
18. M. L. Harris, P. Morberg, W. J. M. Bruce, and W. R. Walsh, "An improved method for measuring tibiofemoral contact areas in total knee arthoplasty: A comparison of K-scan sensor and fuji film, " J. Biomechanics, vol.32, pp. 951-958, 1999.
19. D. Crottet, T. Maeder, D. Fritschy, H. Bleuler, L.-P. Nolte, and I. P. Pappas, "Development of a force amplitude-and-location-sensing device designed to improve the ligament balancing procedure in TKA, " IEEE Trans. Biomed. Eng., vol.52, pp. 1609-1611, 2005.
20. C. Kitchin and L. Counts, A Designer's Guide to Instrumentation Amplifiers, 3rd ed., Analog Devices, b 2000.
21. R. G. Meyer and P. Gray, Analysis and Design of Analog Integrated Circuits. New York: Wiley, 1993.
22. A. P. Brokaw, "A simple three-terminal IC bandgap reference, " IEEE J. Solid-State Circuits, vol.9, pp. 388-393, 1974.
23. M. E.Waltari and K. A. I. Halonen, Circuit Techniques for Low-Voltage and High-Speed A/D Converters. Boston, MA: Kluwer Academic, 2002.
24. L. A. Bienstman and H. J. De Man, "An eight-channel 8 bit microprocessor compatible NMOS D/A converter with programmable scaling, " IEEE J. Solid-State Circuits, vol.15, pp. 1051-1059, 1980.
25. M. D. Scott, B. E. Boser, and K. S. J. Pister, "An ultralow-energy ADC for smart dust, " IEEE J. Solid-State Circuits, vol.38, pp. 1123-1129, 2003.
26. T. O. Anderson, "Optimum control logic for successive approximation AD converters, " Comput. Design, vol.11, pp. 81-86, 1972.
27. M. Gustavsson, J. J. Wikner, and N. Tan, CMOS Data Converters for Communications. Boston, MA: Kluwer Academic, 2000.
28. W. C. Song, H. W. Choi, S. U. Kwak, and B. S. Song, "A 10-b 20-Msample/s low-power CMOS ADC, " IEEE J. Solid-State Circuits, vol.30, pp. 514-521, 1995.
29. A. V. D. Bosch, M. Steyaert, and W. M. C. Sansen, Static and Dynamic Performance Limitations for High Speed D/A Converters. Boston, MA: Kluwer Academic, 2004.
30. H. Kohno, Y. Nakamura, A. Kondo, H. Amishiro, T. Miki, and K. Okada, "A 350-MS/s 3.3-V 8-bit CMOS D/A converter using a delayed driving scheme, " in Proc. IEEE 1995 Custom Integr. Circuits Conf., 1995, pp. 211-214.
31. R. J. V. d. Plassche, CMOSIntegrated Analog-to-Digital and Digital-to-Analog Converters, 2nd ed. Boston, MA: Kluwer Academic, 2003.