Effects of activator type/concentration and curing temperature on alkali-activated binder based on copper mine tailings

Journal of Materials Science

Volumn 47, Issue 16, 2012, Pages 5933-5945

  Ahmari, Saeed ^a   Zhang, Lianyang ^a   Zhang, Jinhong ^a  

^a University of Arizona   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALKALI-ACTIVATED BINDER; ALKALINE ACTIVATORS; COPPER MINE TAILINGS; CRYSTALLINE PHASE; CURING TEMPERATURE; GEOPOLYMERIZATION; HETEROGENEOUS MICROSTRUCTURE; MICRO-STRUCTURAL; NAOH CONCENTRATION; NAOH SOLUTIONS; RECYCLING AND UTILIZATION; SEM/EDX; SI/AL RATIO; SODIUM ALUMINATE; SODIUM HYDROXIDES; SODIUM SILICATE; UNCONFINED COMPRESSIVE STRENGTH; XRD PATTERNS;

BINDERS; COPPER MINES; INORGANIC POLYMERS; SILICON COMPOUNDS; SODIUM; TAILINGS; X RAY DIFFRACTION; X RAY SPECTROSCOPY;

CURING;

EID: 84864461264     PISSN: 00222461     EISSN: 15734803     Source Type: Journal    
DOI: 10.1007/s10853-012-6497-9     Document Type: Article

References (59)

1. Meyer C (2009) Cement Concr Compos 31:601-605.
2. World Business Council for Sustainable Development (2010) Cement sustainability initiative. http://wbcsdcement.org.
3. Davidovits J (1994) In: Metha PK (ed) Proceedings of V. Mohan Malhotra symposium: concrete technology, past, present and future. ACI SP-144, p 383-397.
4. Malhotra VM (2000) In: Gjorv OE, K Sakai (eds) Concrete technology for a sustainable development in the 21st century. E & FN Spon, London, p 226.
5. McCaffrey R (2002) Climate change and the cement industry. Glob Cem Lime Mag (Environmental Special Issue): 15.
6. Arm M (2003) Mechanical properties of residues as unbound road materials-experimental tests on MSWI bottom ash, crushed concrete and blast furnace slag. KTH Land and Water Resources Engineering, Stockholm.
7. USEPA (2009) Wastes-resource conservation-reduce, reuse, recycle-construction & demolition materials. http://www.epa.gov/epawaste/ conserve/rrr/imr/cdm/index.htm.
8. Pacheco-Torgal F, Castro-Gomes J, Jalali S (2008) Constr Build Mater 22(11):2212-2219.
9. Rattanasak U, Chindaprasirt P (2009) Miner Eng 22:1073-1078.
10. Alonso S, Palomo A (2001) Cem Concr Res 31(1):25-30.
11. Duxson P, Provis JL, Lukey GC, Mallicoat SW, Kriven WM, Van Deventer JSJ (2005) Colloids Surf A 269:47-58.
12. Duxson P, Fernandez-Jimenez A, Provis JL, Lukey GC, Palomo A, Van Deventer JSJ (2007) J Mater Sci 42:2917-2933.
13. Li Z, Ding Z, Zhang Y (2004) In: Proceedings of international workshop on sustainable development and concrete technology, Beijing, China, p 55.
14. Drechsler M, Graham A (2005) Innovative material technologies: bringing resources sustainability to construction and mining industries. 48th Institute of Quarrying Conference, Adelaide.
15. Shi C, Fernandez-Jimenez A (2006) J Hazard Mater B137 1656-1663.
16. Majidi B (2009) Mater Technol 24(2):79-87.
17. Giannopoulou IP, Panias D (2006) In: 2nd International conference on advances in mineral resources management and environmental geotechnology, Greece.
18. Southam DC, Brent GF, Felipe F, Carr C, Hart RD, Wright K (2007) Towards more sustainable mine fills-replacement of ordinary Portland cement with geopolymer cements. World Gold Conference, Australia.
19. Pacheco-Torgal F, Castro-Gomes J, Jalali S (2008) Constr Build Mater 22(6):1201-1211.
20. Pacheco-Torgal F, Castro-Gomes J, Jalili S (2010) J Mater Civ Eng 22:897-904.
21. Collins RJ, Ciesielski SK (1994) Recycling and use of waste materials and by-products in highway construction. National Cooperative Highway Research Program Synthesis of Highway Practice 199. Transportation Research Board, Washington, DC.
22. FHWA (Federal Highway Administration) (2008) User guidelines for byproduct and secondary use materials in pavement construction. Report no. FHWA-RD-97-148.
23. Pacheco-Torgal F, Castro-Gomes JP, Jalali S (2008) Constr Build Mater 22:1939-1949.
24. Xu H, Van Deventer JSJ (2000) Int J Miner Process 59(3): 247-266.
25. Chindaprasirt P, Chareerat T, Siricicatnanon V (2007) Cement Concr Compos 29(3):224-229.
26. Guo X, Shi H, Dick WA (2010) Cement Concr Compos 32: 142-147.
27. Yunfen H, Dongmin W, Wenjuan Z, Hongbo L, Lin W (2009) J Wuhan Univ Technol Mater Sci Ed 24(5):711-715.
28. Villa C, Pecina ET, Torres R, Gómez L (2010) Constr Build Mater 24:2084-2090.
29. Chindaprasirt P, Rattanasak U (2008) In: Technology and innovation for sustainable development conference (TISD2008), p 77.
30. Cheng TW, Chiu JP (2003) Miner Eng 16:205-210.
31. Provis JL, Yong CZ, Duxson P, Van Deventer JSJ (2009) Colloids Surf A 336:57-63.
32. Detphan S, Chindaprasirt P (2008) In: Technology and innovation for sustainable development conference (TISD2008), p 111.
33. Ma Y, Hu J, Ye G (2012) J Mater Sci. doi:10.1007/s10853- 012-6316-3.
34. Law DW, Adam A, Molyneaux TK, Patnaikuni I (2012) Mater Struc. doi:10.1617/s11527-012-9842-1.
35. Silva PD, Sagoe-Crenstil K, Sirivivatnanon V (2007) Cem Concr Res 37:512-518.
36. Bernal SA, Rodriguez ED, de Gutierrez RM, Provis JL, Delvasto S (2012) J Mater Sci 3(1):99-108.
37. Lee WKW, Van Deventer JSJ (2002) Colloid Surf 211:115-126.
38. Duxson P, Lukey GC, Separovic F, Van Deventer JSJ (2005) Ind Eng Chem Res 44:832-839.
39. Sindhunata Van, Deventer JSJ, Lukey GC, Xu H (2006) Ind Eng Chem Res 45(10):3559-3568.
40. Fernandez-Jimenez A, Palomo A, Sobrados I, Sanz J (2006) Microporous Mesoporous Mater 91(1-3):111-119.
41. Rowles M, O'Connor B (2003) J Mater Chem 13:1161-1165.
42. Schmucker M, MacKenzie KJD (2005) Ceram Int 31(3):433-437.
43. Hajimohammadi A, Provis JL, Van Deventer JSJ (2008) Ind Eng Chem Res 47(23):9396-9405.
44. Krivenko PV, Kovalchuk GY (2002) In: International conference on geopolymer-2002-turn potential into profit, Melbourne, October 28-29.
45. Fletcher RA, MacKenzie KJD, Nicholson CL, Shimada S (2005) J Eur Ceram Soc 25(9):1471-1477.
46. Phair JW, Van Deventer JSJ (2002) Ind Eng Chem Res 41: 4242-4251.
47. Brew DRM, MacKenzie KJD (2007) J Mater Sci 42:3990-3993.
48. Verdolotti L, Iannace S, Lavorgna M, Lamanna R (2008) J Mater Sci 43:865-873.
49. Temuujin J, Minjigmaa A, Rickard W, Lee M, Williams I, Van Riessen A (2009) Appl Clay Sci 46:265-270.
50. Kawano M, Tomita K (1997) Clays Clay Miner 45(3):365-377.
51. Ahmari S, Zhang L (2012) Constr Build Mater 29:323-331.
52. Zhang L, Ahmari S, Zhang S (2011) Constr Build Mater 25(9):3773-3781.
53. Chen C, Gong W, Lutze W, Pegg IL (2011) J Mater Sci 46(9): 3073-3083. doi:10.1007/s10853-010-5186-9.
54. Khale D, Chaudhary R (2007) J Mater Sci 42:729-746. doi: 10.1007/s10853-006-0401-4.
55. Panagiotopoulou CH, Kontori E, Perraki TH, Kakali G (2007) J Mater Sci 42:2967-2973. doi:10.1007/s10853-006-0531-8.
56. Thakur RN, Ghosh S (2009) ARPN J Eng Appl Sci 4(4):68-74.
57. Yao X, Zhang Z, Zhua H, Chen Y (2009) Thermochim Acta 493(1-2):49-54.
58. Cyr M, Idir R, Poinot T (2012) J Mater Sci 47(6):2782-2797. doi:10.1007/s10853-011-6107-2.
59. Muñiz-Villarreal MS, Manzano-Ram?́rez A, Sampieri-Bulbarela S, Gasca-Tirado JR, Reyes-Araiza JL, Rubio-Á valos JC, Pérez- Bueno JJ, Apatiga LM, Zaldivar-Cadena A, Amigó-Borrás V (2010) The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer. Mater Lett 65:995