Development of monolithic YSZ porous and dense layers through multiple slip casting for ceramic fuel cell applications

International Journal of Applied Ceramic Technology

Volumn 9, Issue 6, 2012, Pages 1011-1021

  Hanifi, Amir Reza ^a   Shinbine, Alyssa ^a   Etsell, Thomas H ^a   Sarkar, Partha ^b  

^a UNIVERSITY OF ALBERTA   (Canada)

^b Carbon and Energy Management   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CALCINATION TEMPERATURE; CALCINED POWDER; CERAMIC FUEL CELLS; DENSE LAYER; FUEL CELL APPLICATION; FUEL CELL ELECTROLYTES; FUNCTIONAL ELECTROLYTES; GROWTH OF PARTICLES; HIGH QUALITY; HIGH SURFACE AREA; HIGH-TEMPERATURE CALCINATION; INTERCONNECTED POROUS STRUCTURE; MULTIPLE SLIPS; PORE FORMERS; POROUS STRUCTURES; POROUS SUPPORT; SINTERABILITY; SLIP-CASTING; STARTING POWDERS; SURFACE AREA; VOID NETWORKS;

BALL MILLING; ELECTROLYTES; POROSITY; SINTERING;

CALCINATION;

EID: 84864277965     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2011.02617.x     Document Type: Article

References (29)

1. L. L. Hench, " Bioceramics," J. Am. Ceram. Soc., 81 [7] 1705-1728 (1998).
2. K. Tsukuma, " Transparent Titania Yttria Zirconia Ceramics," J. Mater. Sci. Lett., 5 [11] 1143-1144 (1986).
3. 2-Thermal Barrier Coatings for Turbine Applications During High-Temperature-Load," Mater. Corros.-Werkst. Korros., 50 [7] 417-421 (1999).
4. 3 for Terahertz Wave Applications," Appl. Phys. Lett., 91 [15] 1-3 (2007).
5. A. Sundh, M. Molin, and, G. Sjogren, " Fracture Resistance of Yttrium Oxide Partially-Stabilized Zirconia All-Ceramic Bridges after Veneering and Mechanical Fatigue Testing," Dent. Mater., 21 [5] 476-482 (2005).
6. N. Q. Minh, " Ceramic Fuel-Cells," J. Am. Ceram. Soc., 76 [3] 563-588 (1993).
7. S. C. Singhal, " Advances in Solid Oxide Fuel Cell Technology," Solid State Ionics, 135 [1-4] 305-313 (2000).
8. S. M. Haile, " Fuel Cell Materials and Components," Acta Mater., 51 [19] 5981-6000 (2003).
9. S. P. S. Badwal, and, K. Foger, " Solid Oxide Electrolyte Fuel Cell Review," Ceram. Int., 22 [3] 257-265 (1996).
10. L. Zhang, S. P. Jiang, W. Wang, and, Y. J. Zhang, " NiO/YSZ, Anode-Supported, Thin-Electrolyte, Solid Oxide Fuel Cells Fabricated by Gel Casting," J. Power Sources, 170 [1] 55-60 (2007).
11. X. G. Zhang, et al,., " NiO-YSZ Cermets Supported Low Temperature Solid Oxide Fuel Cells," J. Power Sources, 161 [1] 301-307 (2006).
12. T. Tsai, and, S. A. Barnett, " Effect of LSM-YSZ Cathode on Thin-Electrolyte Solid Oxide Fuel Cell Performance," Solid State Ionics, 93 [3-4] 207-217 (1997).
13. Y. J. Leng, S. H. Chan, K. A. Khor, and, S. P. Jiang, " Development of LSM/YSZ Composite Cathode for Anode-Supported Solid Oxide Fuel Cells," J. Appl. Electrochem., 34 [4] 409-415 (2004).
14. L. Zhang, H. Q. He, W. R. Kwek, J. Ma, E. H. Tang, and, S. P. Jiang, " Fabrication and Characterization of Anode-Supported Tubular Solid-Oxide Fuel Cells by Slip Casting and Dip Coating Techniques," J. Am. Ceram. Soc., 92 [2] 302-310 (2009).
15. Y. H. Zhang, J. Liu, and, J. Yin, " Fabrication of Anode-Supported Tubular Solid Oxide Fuel Cells by Slip Casting in Combination with Dip Coating Technique," J. Fuel Cell Sci. Technol., 7 [1] 1-5 (2010).
16. J. Ding, J. Liu, W. S. Yuan, and, Y. H. Zhang, " Slip Casting Combined with Colloidal Spray Coating in Fabrication of Tubular Anode-Supported Solid Oxide Fuel Cells," J. Eur. Ceram. Soc., 28 [16] 3113-3117 (2008).
17. 2 Powders on Fabrication of Anode-Supported Solid Oxide Fuel Cells," J. Power Sources, 117 [1-2] 26-34 (2003).
18. T. Matsushima, H. Ohrui, and, T. Hirai, " Effects of Sinterability of YSZ Powder and NiO Content on Characteristics of Ni-YSZ Cermets," Solid State Ionics, 111 [3-4] 315-321 (1998).
19. L. Jia, Z. Lu, J. P. Miao, Z. G. Liu, G. Q. Li, and, W. H. Su, " Effects of Pre-Calcined YSZ Powders at Different Temperatures on Ni-YSZ Anodes for SOFC," J. Alloys Compd., 414 [1-2] 152-157 (2006).
20. A. R. Hanifi, A. Torabi, T. H. Etsell, L. Yamarte, and, P. Sarkar, " Porous Electrolyte-Supported Tubular Micro-SOFC Design," Solid State Ionics, (2010) DOI:10.1016/j.ssi.2010.07.010.
21. M. Prica, T. Alston, and, K. Kendall, " Mechanical and Thermal Properties of a 200 Tube SOFC Reactor," SOFC V. eds., U. Stimming, S. C. Singhal, H. Tagawa, and, W. Lehnert,. Electrochemical Society, Pennington, NJ, 97-40, 1997, 619-625.
22. I. P. Kilbride, " Preparation and Properties of Small Diameter Tubular Solid Oxide Fuel Cells for Rapid Start-Up," J. Power Sources, 61 [1-2] 167-171 (1996).
23. T. L. Nguyen, et al,., " Fabrication and Characterization of Anode-Supported Tubular SOFCs with Zirconia-Based Electrolyte for Reduced Temperature Operation," J. Electrochem. Soc., 151 [8] A1230-A1235 (2004).
24. P. Sarkar, L. Yamarte, H. S. Rho, and, L. Johanson, " Anode-Supported Tubular Micro-Solid Oxide Fuel Cell," Int. J. Appl. Ceram. Technol., 4 [2] 103-108 (2007).
25. T. Suzuki, T. Yamaguchi, Y. Fujishiro, and, M. Awano, " Fabrication and Characterization of Micro Tubular SOFCs for Operation in the Intermediate Temperature," J. Power Sources, 160 [1] 73-77 (2006).
26. H. Djohari, J. I. Martinez-Herrera, and, J. J. Derby, " Transport Mechanisms and Densification During Sintering: I. Viscous Flow Versus Vacancy Diffusion," Chem. Eng. Sci., 64 [17] 3799-3809 (2009).
27. Y. L. Zhang, H. F. Gao, D. K. Peng, M. Y. Meng, and, X. Q. Liu, " Dip-Coating Thin Yttria-Stabilized Zirconia Films for Solid Oxide Fuel Cell Applications," Ceram. Int., 30 [6] 1049-1053 (2004).
28. T. Hosomi, M. Matsuda, and, M. Miyake, " Electrophoretic Deposition for Fabrication of YSZ Electrolyte Film on Non-Conducting Porous NiO-YSZ Composite Substrate for Intermediate Temperature SOFC," J. Eur. Ceram. Soc., 27 [1] 173-178 (2007).
29. Z. G. Xu, G. Rajaram, J. Sankar, and, D. Pai, " Electrophoretic Deposition of YSZ Electrolyte Coatings for Solid Oxide Fuel Cells," Surf. Coat. Technol., 201 [7] 4484-4488 (2006).