Dual-polyelectrolyte adsorption of poly(allylamine hydrochloride) and xylan onto recycled unbleached kraft pulps

BioResources

Volumn 7, Issue 2, 2012, Pages 2075-2089

  Galván, María V ^a   Mocchiutti, Paulina ^a   Cornaglia, Laura M ^b   Zanuttini, Miguel A ^a  

^a UNIVERSIDAD NACIONAL DEL LITORAL   (Argentina)

^b Facultad de Ciencias Naturales e Instituto M Lillo   (Argentina)

Author keywords

Adsorption isotherm; Layer by layer technique; Natural polymers; Tensile strength

Indexed keywords

ADSORPTION; ADSORPTION ISOTHERMS; KRAFT PULP; NATURAL POLYMERS; PAPER AND PULP MILLS; POLYELECTROLYTES; RECYCLING; TENSILE STRENGTH; UNBLEACHED PULP; X RAY PHOTOELECTRON SPECTROSCOPY;

ADSORPTION TIME; LAYER-BY-LAYER TECHNIQUES; PAH ADSORPTION; POLY(ALLYLAMINE HYDROCHLORIDE); POLYELECTROLYTE ADSORPTION; SURFACE NITROGEN; UNBLEACHED KRAFT PULPS; UNBLEACHED SOFTWOOD KRAFT PULPS;

IONIC STRENGTH;

ADSORPTION; ESCA; IONIC STRENGTH; ISOTHERMS; KRAFT PULPS; PHOTOELECTRONS; POLYELECTROLYTES; POLYMERS; RECYCLING; SODIUM CHLORIDE; TENSILE STRENGTH; X RAY SPECTROSCOPY;

EID: 84863846985     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.7.2.2075-2089     Document Type: Article

References (31)

1. DiFlavio, J.-L., Bertoia, R., Pelton, R., and Leduc, M. (2005). "The mechanism of polyvinylamine wet-strengthening," 13th Fund. Res. Symp., Cambridge, UK, September 2005, 1293-1316.
2. Eklund, D. and Lindström, T. (1991). "Colloidal Stability," In: Paper Chemistry. An Introduction. DT Paper Science Publications, Finland, Ch. 5, 106-133.
3. Eriksson, M., Torgnysdotter, A., and Wågberg, L. (2006). "Surface modification of wood fibers using the polyelectrolyte multilayer technique: Effects of fiber joint and paper strength properties," Ind. Eng. Chem. Res. 45(15), 5279-5286.
4. Fleer, G. J., Cohen-Stuart, M. A., Scheutjens, J. M. H. M., Cosgrove, T., and Vincent, B. (1993). "Electrostatic effects: Charged surfaces and polyelectrolyte adsorption," In: Polymers at Interfaces, Chapman & Hall, London, Ch. 7, 343-375.
5. Gimåker, M., and Wågberg, L. (2009). "Adsorption of polyallylamine to lignocellulosic fibres: Effect of adsorption conditions on localisation of adsorbed polyelectrolyte and mechanical properties of resulting paper sheets," Cellulose 16, 87-101.
6. Hodge, J. E., and Hofreiter, B. T. (1962). Methods in Carbohydrate Chemistry, Academic Press, New York, San Francisco, and London.
7. Horvath, A. E., Lindström, T., and Laine, J. (2006). "On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with ESCA," Langmuir 22(2), 824-830.
8. Horvath, A. T., Horvath, A. E., Lindström, T., and Wågberg, L. (2008). "Diffusion of cationic polyelectrolytes into cellulosic fibers," Langmuir 24, 10797-10806.
9. Hubbe, M. A., Jackson, T. L., and Zhang, M. (2003). "Fiber surface saturation as a strategy to optimize dual-polymer dry strength treatment," Tappi J. 2(11), 7-12.
10. Hubbe, M. A., Venditti, R. A., and Rojas, O. J. (2007). "What happens to cellulosic fibers during papermaking and recycling? A review," BioResources (http://www.bioresources.com), 2(4), 739-788.
11. Katz, S., Beatson, R. P., and Scallan, A. M. (1984). "The determination of strong and weak acidic groups in sulfite pulps," Svensk Papperstidning 87, 48-53.
12. Köhnke, T., and Brelid, H. (2009). "Adsorption of cationized barley husk xylan on kraft pulp fibres: Influence of degree of cationization on adsorption characteristics," Cellulose 16, 1109-1121.
13. Köhnke, T. (2010). "Adsorption of xylans on cellulosic fibres - Influence of xylan composition on adsorption characteristics and kraft pulp properties," PhD. Thesis. Chalmers University of Technology, Göteborg, Sweden.
14. Köhnke, T., Lund, K., Brelid, H., Westman, G. (2010). "Kraft pulp hornification: A closer look at the preventive effect gained by glucuronoxylan adsorption," Carbohydrate Polymers 81, 226-233.
15. Linder, A., Bergman, R., Bodin, A., and Gatenholm, P. (2003) "Mechanism of assembly of xylan onto cellulose surfaces," Langmuir 19, 5072-5077.
16. Lingström, R., and Wågberg, L. (2008). "Polyelectrolyte multilayers on wood fibers: Influence of molecular weight on layer properties and mechanical properties of papers from treated fibers," J. Colloid Interface Sci. 328, 233-242.
17. Lloyd, J. A., and Horne, C. W. (1993). "The determination of fibre charge and acidic groups of radiata pine pulps," Nordic Pulp Paper Res. J. 8(1), 48-57.
18. Magaton, A., Colodette, J., Pilo-Veloso, D. and Gomide, J. (2011). "Behavior of eucalyptus wood xylans across kraft cooking," J. Wood Chem. Technol. 31(1), 58-72.
19. Mocchiutti, P., and Zanuttini, M. A. (2005). "A useful equation for estimating the surface charge of pulp fibers," Tappi J. 4(5), 18-22.
20. Mocchiutti, P., and Zanuttini, M.A. (2007). "Key considerations in the determination of polyelectrolyte concentration by the colloidal titration method," BioResources (http://www.bioresources.com) 2(3), 399-407.
21. Mocchiutti, P., Galván, M. V., Inalbon, M. C., and Zanuttini, M. A. (2011). "Improvement of paper properties of recycled unbleached softwood kraft pulps by poly(allylamine hydrochloride)," BioResources (http://www.bioresources.com) 6(1), 570-583.
22. Mortimer, J. C., Miles, G. P., Brown, D. M., Zhang, Z., Segura, M., Weimar, T., Yu, X., Seffen, K. A., Stephens, E., Turner, S. R. and Dupree, P. (2010). "Absence of branches from xylan in Arabidopsis gux mutants reveals potential for simplification of lignocellulosic biomass," PNAS, 107(40), 17409-17414.
23. Ren, J., Peng, F., Sun, R., and Kennedy, J. (2009). "Influence of hemicellulosic derivatives on the sulfate kraft pulp strength," Carbohydrate Polymers 75, 338-342.
24. Salyers, A. A., Gherardini, F., and O'Brien, M. (1981). "Utilization of xylan by two species of human colonic Bacteroides," Appl. Environ. Microbiol. 41(4), 1065-1068.
25. Silva, T. C. F., Colodette, J. L., Lucia, L. A., de Oliveira, R. C., Oliveira, F. N., and Silva, L. H. M. (2011). "Adsorption of chemically modified xylans on eucalyptus pulp and its effect on the pulp physical properties," Ind. Eng. Chem. Res. 50(2), 1138-1145.
26. Sixta, H., Guetsch, J., Nousiainen, T., and Wollboldt, P. (2011). "Progress and challenges in the isolation of xylan from Eucalyptus wood," 5th International Colloquium on Eucalyptus Pulp, May 9-12. Porto Seguro, Bahia, Brazil.
27. Sjöström, E. (1993). Wood Chemistry. Fundamentals and Applications. Second Edition. Academic Press Inc., San Diego, California, USA.
28. Sun, R. C., Sun, X. F., and Tomkinson, J. (2004). "Chapter 1: Hemicelluloses and their derivatives," In: Hemicelluloses: Science and Technology, ACS Symposium Series 864, USA, Ch. 1, 2-22.
29. Tanaka, H., and Ichiura, H. (1999). "A novel and simple method for determining the cationic demand of suspensions using chromophoric labeled cationic polymers. Colloid and Surfaces A: Physicochemical and Engineering Aspects 159, 103-107.
30. Terayama, H. (1952). "Method of colloid titration (a new titration between polymer adsorption)," Journal of Polymer Science 8(2), 243-253.
31. Wågberg, L., Forsberg, S., Johansson, A., and Juntti, P. (2002). "Engineering of fibre surface properties by application of the polyelectrolyte multilayer concept. Part I: Modification of paper strength," J. Pulp Pap Sci. 28, 222-228.