The manufacturing of polyamide- and polypropylene-organoclay nanocomposite filaments and their suitability for textile applications

Thermochimica Acta

Volumn 543, Issue , 2012, Pages 37-58

  Onder, Emel ^a   Sarier, Nihal ^b   Ersoy, M Sabri ^a  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

^b ISTANBUL KULTUR UNIVERSITY   (Turkey)

Author keywords

DMA; Fiber; Organoclay; Polyamide 6; Polypropylene; Thermal property

Indexed keywords

DMA; DYNAMIC MECHANIC ANALYSIS; FOURIER TRANSFORM INFRARED SPECTROMETRY; MECHANICAL PERFORMANCE; MELT-SPINNING TECHNIQUES; NANOCOMPOSITE FIBERS; ORGANOCLAYS; PA-6 FIBER; POLYAMIDE 6; TENSILE TESTS; TEXTILE APPLICATIONS; THERMAL CHARACTERIZATION; THERMOGRAVIMETRIC;

DIFFERENTIAL SCANNING CALORIMETRY; FIBERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; MELT SPINNING; NANOCOMPOSITES; ORGANOCLAY; SCANNING ELECTRON MICROSCOPY; TENSILE TESTING; THERMOANALYSIS; THERMODYNAMIC PROPERTIES; THERMOPLASTICS;

POLYPROPYLENES;

EID: 84863725635     PISSN: 00406031     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tca.2012.05.002     Document Type: Article

References (56)

1. A. Okada, Y. Fukushima, M. Kawasumi, S. Inagaki, A. Usuki, S. Sugiyama, T. Kurauchi, O. Kamigaito, Composite material and process for manufacturing same, US Patent 4,739,007 (1988), available from http://patft.uspto.gov/.
2. A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, and O. Kamigaito Synthesis of nylon 6-clay hybrid J. Mater. Res. 8 5 1993 1179 1184
3. Y. Kojima, K. Fukumori, A. Usuki, A. Okada, and T. Kurauchi Gas permeabilities in rubber-clay hybrid J. Mater. Sci. Lett. 12 12 1993 889 890
4. M. Arroyo, M.A. Lopez-Manchado, and B. Herrero Organo-montmorillonite as substitute of carbon black in natural rubber compounds Polymer 44 2003 2447 2453
5. S.S. Ray, and M. Okamoto Polymer/layered silicate nanocomposites: review from preparation to processing Prog. Polym. Sci. 28 2003 1539 1641
6. P. Camargo, H.C. Pedro, K.G. Satyanarayana, and F. Wypych Nanocomposites: synthesis, structure, properties and new application opportunities Mater. Res. 12 2009 1 39
7. Q.H. Zeng, A.B. Yu, G.Q. Lu, and D.R. Paul Clay-based polymer nanocomposites: research and commercial development J. Nanosci. Nanotechnol. 5 10 2005 1574 1592
8. A. Usuki, N. Hasegawa, and M. Kato Polymer-clay nanocomposites Adv. Polym. Sci. 179 2005 135 195
9. F. Hussain, M. Hojjati, M. Okamoto, and R. Gorga Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview J. Compos. Mater. 40 2006 1511 1575
10. N. Bitinis, M. Hernandez, R. Verdejo, J.M. Kenny, and M.A. Lopez-Manchado Recent advances in clay/polymer nanocomposites Adv. Mater. 23 44 2011 5229 5236 (Special Issue: Materials Science in Madrid)
11. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kuraauchi, and O. Kamigaito Mechanical properties of nylon 6-clay hybrid J. Mater. Res. 8 5 1993 1185 1189
12. J.W. Cho, and D.R. Paul Nylon 6 nanocomposites by melt compounding Polymer 42 2001 1083 1094
13. Q. Chen, I. Chasiotis, C. Chen, and A. Roy Nanoscale and effective mechanical behavior and fracture of silica nanocomposites Compos. Sci. Technol. 68 2008 3137 3144
14. A.N. Wilkinson, Z. Man, J.L. Stanford, P. Matikainen, M.L. Clemens, G.C. Lees, and C.M. Liauw Tensile properties of melt intercalated polyamide 6-montmorillonite nanocomposites Compos. Sci. Technol. 67 15 2007 3360 3368
15. ® 30B composites. Effects of the preparation conditions Eur. Polym. J. 46 5 2010 838 853
16. S.P. Liu, S.S. Hwang, J.M. Yeh, and C.C. Hung Mechanical properties of polyamide-6/montmorillonite nanocomposites - Prepared by the twin-screw extruder mixed technique Int. Commun. Heat Mass 38 2011 37 43
17. M. Quaresimin, M. Salviato, and M. Zappalorto Strategies for the assessment of nanocomposite mechanical properties Composites Part B 2012 10.1016/j.compositesb.2011.12.012
18. B.Z. Jang, D.R. Uhlmann, and J.B. Vander Sande Rubber-toughening in polypropylene J. Appl. Polym. Sci. 30 6 1985 2485 2504
19. J. Li, C. Zhou, and W. Gang Study on nonisothermal crystallization of maleic anhydride grafted polypropylene/montmorillonite nanocomposite Polym. Test. 22 2 2003 217 223
20. Y. Zhou, V. Rangari, H. Mahfuz, S. Jeelani, and P.K. Mallick Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites Mater. Sci. Eng. A: Struct. 402 1-2 2005 109 117
21. K. Wang, P. Zhao, H. Yang, S. Liang, Q. Zhang, R. Du, Q. Fu, Z. Yu, and E. Chen Unique clay orientation in the injection-molded bar of isotactic polypropylene/clay nanocomposite Polymer 47 20 2006 7103 7110
22. J. Golebiewski, and A. Galeski Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA Compos. Sci. Technol. 67 15-16 2007 3442 3447
23. K. Saminathan, P. Selvakumar, and N. Bhatnagar Fracture studies of polypropylene/nanoclay composite. Part I. Effect of loading rates on essential work of fracture Polym. Test. 27 3 2008 296 307
24. K.S. Santos, S.A. Liberman, M.A.S. Oviedo, and R.S. Mauler Optimization of the mechanical properties of polypropylene-based nanocomposite via the addition of a combination of organoclays Compos Part A-Appl S 40 8 2009 1199 1209
25. H. Baniasadi, S.A. Ramazani, and S.J. Nikkhah Investigation of in situ prepared polypropylene/clay nanocomposites properties and comparing to melt blending method Mater. Des. 31 1 2010 76 84
26. D.H. Kim, P.D. Fasulo, W.R. Rodgers, and D.R. Paul Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I. Morphology and mechanical properties Polymer 48 2007 5960 5978
27. K.S. Santos, S.A. Liberman, and M.A.S.R.S. Oviedo Mauleri Optimization of the mechanical properties of polypropylene-based nanocomposite via the addition of a combination of organoclays Compos Part A-Appl S 40 2009 1199 1209
28. R.A. Vaia, H. Ishii, and E.P. Giannelis Synthesis and properties of two dimensional nanostructures by direct intercalation of polymer melts in layered silicates Chem. Mater. 5 1993 1694 1696
29. S.C. Tjong Structural and mechanical properties of polymer nanocomposites Mater. Sci. Eng. Rep. 53 3-4 2006 173 197
30. D.R. Paul, and L.M. Robeson Polymer nanotechnology: nanocomposites Polymer 49 15 2008 3187 3204
31. J.F. Kennedy, D. Makarewicz, P.J. Brown, and K. Stevens Nanofibers and Nanotechnology in Textiles 2007 Woodhead Publishing Ltd Cambridge 528 pp., ISBN:1-84569-105-9
32. R. Dastjerdi, and M. Montazer A review on the application of inorganic nano-structured materials in the modification of textiles: focus on anti-microbial properties Colloids Surf. B 79 1 2010 5 18
33. N. Sarier, and E. Onder Organic modification of montmorillonite with low molecular weight polyethylene glycols and its use in polyurethane nanocomposite foams Thermochim. Acta 510 2010 113 121
34. ® F223-D Data sheet, http://www.arcopolimeri.com/ multimedia/prodotti/pdf/1.pdf.
35. ® HG265FB Data sheet, http://www.borealisgroup. com/datasheets/10014618.
36. A. Bunsell Handbook of Tensile Properties of Textile Fibres and Technical Fibres 2009 Woodhead Publishing Series in Textiles and CRC Press LLC England 203 210 ISBN-10:1845693876
37. N. Vasantan, and D.R. Salem FTIR spectroscopic characterization of structural changes in polyamide-6 fibers during annealing and drawing J. Polym. Sci. Polym. Phys. 39 2001 536 547
38. X. Cui, and D. Yan Preperation, characterization and crystalline transitions of odd-even polyamides 11,12 and 11,10 Eur. Polym. J. 41 2005 863 870
39. H.E. Miltner, G.V. Assche, A. Pozsgay, B. Pukánszky, and B.V. Mele Restricted chain segment mobility in poly(amide) 6/clay nanocomposites evidenced by quasi-isothermal crystallization Polymer 47 3 2006 826 835
40. T.X. Liu, Z.H. Liu, K.X. Ma, L. Shen, K.Y. Zeng, and C.B. He Morphology, thermal and mechanical behavior of polyamide 6/layered-silicate nanocomposites Compos. Sci. Technol. 63 2003 331 337
41. K.P. Pramoda, and T. Liu Effect of moisture on the dynamic mechanical relaxation of Polyamide-6/Clay Nanocomposites J. Polym. Sci. Polym. Phys. 42 2004 1823 1830
42. K. van Rijswijka, S. Lindstedta, D.P.N. Vlasveldb, H.E.N. Berseea, and A. Beukers Reactive processing of anionic polyamide-6 for application in fiber composites: a comparative study with melt processed polyamides and nanocomposites Polym. Test. 25 2006 873 887
43. A.Y. Rodríguez, P.A. Lloret, C. Cardell, and A.B.R. Navarro Crystalline properties of injection molded polyamide-6 and polyamide-6/ montmorillonite nanocomposites Appl. Clay Sci. 43 1 2009 91 97
44. X. Kong, S.S. Chakravarthula, and Y. Qiao Evolution of collective damage in a polyamide 6-silicate nanocomposite Int. J. Solids Struct. 43 20 2006 5969 5980
45. N.A. Isitman, M. Aykol, and C. Kaynak Nanoclay assisted strengthening of the fiber/matrix interface in functionally filled polyamide 6 composites Compos. Struct. 92 9 2010 2181 2186
46. X. Liua, and Q. Wua PP/clay nanocomposites prepared by grafting-melt intercalation Polymer 42 2001 10013 10019
47. X. Liu, and Q. Wu Non-isothermal crystallization behaviors of polyamide 6/clay nanocomposites Eur. Polym. J. 38 7 2002 1383 1389
48. F. Hussain, M. Hojjati, M. Okamoto, and R.E. Gorga Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview J. Compos. Mater. 40 2006 1511 1575
49. M. Sclavons, M. Laurent, J. Devaux, and V. Carlier Maleic anhydride-grafted polypropylene: FTIR study of a modal polymer grafted by ene-reaction Polymer 46 2005 8062 8067
50. W. Zheng, X. Lu, C.L. Toh, T.H. Zheng, and C. He Effects of clay on polymorphism of polypropylene in polypropylene/clay nanocomposites J. Polym. Sci. Polym. Phys. 42 2004 1810 1816
51. 2 composite textile filaments J. Appl. Polym. Sci. 111 2009 2085 2091
52. H. Dweik, A. Al-Jabareen, G. Marom, and E. Assouline Thermal and chemical effects of nucleating agents on α,β,γ-polymorphism of isotactic polypropylene Int. J. Polym. Mater. 52 7 2003 655 672
53. F.J.M. Rodriguez, J.M.M. Padilla, B.S. Hsiao, M.A. Waldo-Mendoza, E.R. Vargas, and S.S. Valdes The effect of nanoclays on the nucleation, crystallization, and melting mechanisms of isotactic polypropylene Polym. Eng. Sci. 2007 1889 1897 10.1002/pen.20902
54. W. Xu, M. Ge, and P. He Nonisothermal crystallization kinetics of polypropylene/montmorillonite nanocomposites J. Polym. Sci. Polym. Phys. 40 2002 408 414
55. H. Uehara, Y. Yamazaki, and T. Kanamoto Tensile properties of highly syndiotactic polypropylene Polymer 37 1 1996 57 64
56. S.P. Liu, and C.W. Liang Preparation and mechanical properties of polypropylene/montmorillonite nanocomposites - after grafted with hard/soft grafting agent Int. Commun. Heat Mass 38 2011 434 441