Mechanical properties of polyamide-6/montmorillonite nanocomposites - Prepared by the twin-screw extruder mixed technique

International Communications in Heat and Mass Transfer

Volumn 38, Issue 1, 2011, Pages 37-43

  Liu, Sung Po ^a   Hwang, Shyh Shin ^a   Yeh, Jui Ming ^b   Hung, Chi Chang ^a  

^a CHING YUN UNIVERSITY   (Taiwan)

^b CHUNG YUAN CHRISTIAN UNIVERSITY   (Taiwan)

Author keywords

Mechanical property; Montmorillonite; Nanocomposites; Polyamide 6; Twin screw extruder

Indexed keywords

BULK MECHANICAL PROPERTIES; CLAY PLATELETS; FLEXURAL STRENGTH; GOOD COMPATIBILITY; LOW LOADING; MATRIX; MONTMORILLONITE; MONTMORILLONITE NANOCOMPOSITES; NEAT POLYMER; ORGANOPHILIC; POLYAMIDE-6; POLYMER-CLAY NANOCOMPOSITES; POWDER X RAY DIFFRACTION; SEM; SHORE HARDNESS; SURFACE MECHANICAL PROPERTIES; TEM; TWIN SCREW EXTRUDERS;

BENDING STRENGTH; CLAY MINERALS; EXTRUDERS; HARDNESS; NANOCOMPOSITES; SCANNING ELECTRON MICROSCOPY; SCREWS; SILICATE MINERALS; SURFACE MORPHOLOGY; SURFACE TESTING; SURFACES; TENSILE STRENGTH; TRANSMISSION ELECTRON MICROSCOPY; WEAR RESISTANCE; X RAY DIFFRACTION;

MECHANICAL PROPERTIES;

EID: 78650279214     PISSN: 07351933     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.icheatmasstransfer.2010.10.003     Document Type: Article

References (28)

1. Tyan H.L., Liu Y.C., Wei K.H. Effect of reactivity of organics-modified montmorillonite on the thermal and mechanical properties of montmorillonite/polyimide nanocomposites. Chem. Mater. 2001, 13(1):222-226.
2. Gilman J.W., Jackson C.L., Morgan A.B., Hayis R.J., Manias E., Giannelis E.P., Hilton M., Wuthenow D., Phillips S.H. Flammability properties of polymer-layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites. Chem. Mater. 2000, 12(7):1866-1873.
3. Lan T., Kaviratna P.D., Pinnavaia T.J. On the nature of polyimide-clay hybrid composites. Chem. Mater. 1994, 6:573-575.
4. Yeh J.M., Liou S.J., Lai C.Y., Wu P.C., Tsai T.Y. Enhancement of corrosion protection effect in polyaniline via the formation of polyaniline-clay nanocomposite materials. Chem. Mater. 2001, 13(3):1131-1136.
5. Yeh J.M., Liou S.J., Lin C.Y., Cheng C.Y., Chang Y.W., Lee K.R. Anticorrosively enhanced pmma-clay nanocomposite materials with quaternary alkylphosphonium salt as an intercalating agent. Chem. Mater. 2002, 14(1):154-161.
6. Yeh J.M., Chin C.P., Chen Y.C., Ma C.Y., Lee K.R., Wei Y., Li S. Enhancement of corrosion protection effect of poly(o-ethoxyaniline) via the formation of poly(o-ethoxyaniline)-clay nanocomposite materials. Polymer 2002, 43(9):2729-2736.
7. Yeh J.M., Chin C.P., Chang S.J. Enhanced corrosion protection coatings prepared from soluble electronically conductive polypyrrole-clay nanocomposite materials. J. Appl. Polym. Sci. 2003, 88(14):3264-3272.
8. Yeh J.M., Chin C.P. Structure and properties of poly(o-methoxyaniline)-clay nanocomposite materials. J. Appl. Polym. Sci. 2003, 88(4):1072-1080.
9. Yu Y.H., Yeh J.M., Liou S.J., Chang Y.P. Organo-soluble polyimide (TBAPP-OPDA)/clay nanocomposite materials with advanced anticorrosive properties prepared from solution dispersion technique. Acta Mater. 2004, 52(2):475-486.
10. Yu Y.H., Yeh J.M., Jen C.C., Huang H.Y., Wu P.C., Huang C.C. ''Preparation and properties of heterocyclically conjugatedpoly (3-hexylthiophene)-clay nanocomposite. J. Appl. Polym. Sci. 2004, 91(6):3438-3446.
11. Yeh J.M., Liou S.J., Lin C.G., Chang Y.P., Yu Y.H. Effective enhancement of anticorrosive properties of polystyrene by polystyrene-clay nanocomposite materials. J. Appl. Polym. Sci. 2004, 92(3):1970-1976.
12. Yeh J.M., Liou S.J., Lu H.J., Huang H.Y. Enhancement of corrosion protection effect of poly(styrene-co-acrylonitrile) by the incorporation of nanolayers of montmorillonite clay into copolymer matrix. J. Appl. Polym. Sci. 2004, 92(4):2269-2277.
13. Yeh J.M., Chen C.L., Chen Y.C., Ma C.Y., Yu Y.H., Huang H.Y. Enhanced corrosion prevention effect of polysulfone-clay nanocomposite materials prepared by solution dispersion. J. Appl. Polym. Sci. 2004, 92(1):631-637.
14. Yeh J.M., Chen C.L., Kuo T.H., Su W.F., Huang H.Y., Liaw D.J., Lu H.Y., Liu C.F., Yu Y.H. Preparation and properties of (BATB-ODPA) polyimide-clay nanocomposite materials. J. Appl. Polym. Sci. 2004, 92(2):1072-1079.
15. Yu Y.H., Yeh J.M., Liou S.J., Chen C.L., Liaw D.J., Lu H.Y. Preparation and properties of polyimide-clay nanocomposite materials for anticorrosion application. J. Appl. Polym. Sci. 2004, 92(6):3573-3582.
16. Kim Y., White J.L. Formation of polymer nanocomposites with various organoclays. J. Appl. Polym. Sci. 2005, 96:1888-1896.
17. US Patent 2,130,523 'Linear polyamides suitable for spinning into strong pliable fibers', U.S. Patent 2,130,947 'Diamine dicarboxylic acid salt' and U.S. Patent 2,130,948 'Synthetic fibers', all issued September 20, 1938.
18. Garcia M., Rooij M.D., Winnubst L., Zyl W.E.V., Verweij H. Friction and wear studies on nylon-6/SiO2 nanocomposites. J. Appl. Polym. Sci. 2004, 92:1855-1862.
19. Yu S., Yu Z., Mai Y.W. Effects of SEBS-g-MA on tribological behaviour of nylon 66/organoclay nanocomposites. Tribol. Int. 2007, 40:855-862.
20. Cho J.W., Paul D.R. Nylon-6 nanocomposites by melt compounding polymer 2001, 1083-1094.
21. Wilkinson A.N., Man Z., Stanford J.L., Matikainen P., Clemens M.L., Lees G.C., Liauw C.M. Tensile properties of melt intercalated polyamide 6-montmorillonite nanocomposites. Compos. Sci. Technol. 2007, 67(15):3360-3368.
22. Kojima Y., Usuki A., Kawasumi M., Okada A., Fukushima Y., Kuraauchi T., Kamigaito O. Mechanical properties of nylon 6-clay hybrid. J. Mater. Res. 1993, 8(5):1185-1189.
23. Wang H., Zeng C., Elkovitch M., Lee L.J., Koelling K.W. Processing and properties of polymeric nano-composites. Polym. Engng. Sci. 2001, 41(11):2036-2046.
24. Kharbas H., Nelson P., Yuan M., Gong S., Trung L.S., Spindler R. Effects of nano-fillers and process conditions on the microstructure and mechanical properties of microcellular injection molded polyamide nanocomposites. Polym. Compos. December 2003, 24(6):655-671.
25. Ebbesen T.W., Lezec H.J., Hiura H., Bennett J.W., Ghaemi H.F., Thio T. Electrical conductivity of individual carbon nanotubes. Nature 1996, 382:54-55.
26. Liu S.P., Hsu W.L., Chang K.C., Yeh J.M. Enhancement of the surface and bulk mechanical properties of polystyrene through the incorporation of raw multiwalled nanotubes with the twin-screw mixing technique. J. Appl. Polym. Sci. 2009, 113:992-999.
27. Liu S.P., Huang I.J., Chang K.C., Yeh J.M. Mechanical properties of polystyrene-montmorillonite nanocomposites - prepared by melt intercalation. J. Appl. Polym. Sci. 2010, 115:288-296.
28. Bhimaraj P., Burris D.L., Action J., Sawyer W.G., Toney C.G., Siegel R.W., Schadler L.S. Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate composites. Wear 2005, 258:1437-1443.