메뉴 건너뛰기




Volumn 50, Issue 11, 2011, Pages 2227-2241

Effects of processing parameters on flow-induced crystallization of iPP in microinjection molding

Author keywords

modification; crystalline orientation; isotactic polypropylene; microinjection molding; polymorphism; processing parameters

Indexed keywords

CRYSTALLINE ORIENTATION; CRYSTALLINE ORIENTATIONS; CRYSTALLINITIES; CRYSTALLIZATION ORIENTATION; DIFFERENTIAL SCANNING CALORIMETERS; FLAT PLATE; FLOW-INDUCED CRYSTALLIZATION; INJECTION PRESSURES; INJECTION TIME; ISOTACTIC POLY(PROPYLENE) (IPP); ISOTACTIC POLYPROPYLENE; LONGITUDINAL SECTION; MICRO PART; MICRO-INJECTION MOLDING; MOLD TEMPERATURES; ORIENTATION FUNCTION; POLYMER PROCESSING; PROCESSING CONDITION; PROCESSING PARAMETERS; SEM ANALYSIS; SHISH-KEBAB STRUCTURES; WIDE-ANGLE X-RAY DIFFRACTION;

EID: 84863057855     PISSN: 00222348     EISSN: 1525609X     Source Type: Journal    
DOI: 10.1080/00222348.2011.562839     Document Type: Article
Times cited : (8)

References (27)
  • 1
    • 0036647920 scopus 로고    scopus 로고
    • Replication of sub-micron features using amorphous thermoplastics
    • Monkkonen, K.; Hietala, J. Replication of sub-micron features using amorphous thermoplastics. Polym. Eng. Sci. 2002, 42, 1600.
    • (2002) Polym. Eng. Sci. , vol.42 , pp. 1600
    • Monkkonen, K.1    Hietala, J.2
  • 2
    • 9144269831 scopus 로고    scopus 로고
    • Flow and heat transfer simulation of injection molding with microstructures
    • Yu, L.; Lee, L. J.; Koelling, K. W. Flow and heat transfer simulation of injection molding with microstructures. Polym. Eng. Sci. 2004, 44, 1866.
    • (2004) Polym. Eng. Sci. , vol.44 , pp. 1866
    • Yu, L.1    Lee, L.J.2    Koelling, K.W.3
  • 3
    • 35148841404 scopus 로고    scopus 로고
    • Analysis of morphology and performance of PP microstructures manufactured by micro injection molding
    • Zhang, K. F.; Lu, Z. Analysis of morphology and performance of PP microstructures manufactured by micro injection molding. Microsyst. Technol. 2008, 14, 209.
    • (2008) Microsyst. Technol. , vol.14 , pp. 209
    • Zhang, K.F.1    Lu, Z.2
  • 4
    • 27844561549 scopus 로고    scopus 로고
    • Formability and accuracy of micropolymer compound with added nanomaterials in microinjection molding
    • Huang, C. K.; Chiu, S. W. Formability and accuracy of micropolymer compound with added nanomaterials in microinjection molding. J. Appl. Polym. Sci. 2005, 98, 1865.
    • (2005) J. Appl. Polym. Sci. , vol.98 , pp. 1865
    • Huang, C.K.1    Chiu, S.W.2
  • 7
    • 34948884144 scopus 로고    scopus 로고
    • Crystal form and orientation of isotactic polypropylene samples prepared by vibration-injection molding
    • Zhang, J.; Zeng, T.; Zhu, J. Crystal form and orientation of isotactic polypropylene samples prepared by vibration-injection molding. J. Appl. Polym. Sci. 2007, 106, 1456.
    • (2007) J. Appl. Polym. Sci. , vol.106 , pp. 1456
    • Zhang, J.1    Zeng, T.2    Zhu, J.3
  • 8
    • 33846781701 scopus 로고    scopus 로고
    • Investigation of micro-injection moulding: Factors affecting the replication quality
    • Sha, B.; Dimov, S.; Griffiths, C. Investigation of micro-injection moulding: factors affecting the replication quality. J. Mater. Process. Tech. 2007, 183, 284.
    • (2007) J. Mater. Process. Tech. , vol.183 , pp. 284
    • Sha, B.1    Dimov, S.2    Griffiths, C.3
  • 9
    • 1542500487 scopus 로고    scopus 로고
    • Effects of process parameters on the micro molding process
    • Zhao, J.; Mayes, R. H. Effects of process parameters on the micro molding process. Polym. Eng. Sci. 2003, 43, 1542.
    • (2003) Polym. Eng. Sci. , vol.43 , pp. 1542
    • Zhao, J.1    Mayes, R.H.2
  • 10
    • 0001302524 scopus 로고    scopus 로고
    • Flow-induced orientation and structure formation
    • Keller, A.; Kolnaar, W. H. Flow-induced orientation and structure formation. Mater. Sci. Technol. Lond. 1997, 18, 190.
    • (1997) Mater. Sci. Technol. Lond. , vol.18 , pp. 190
    • Keller, A.1    Kolnaar, W.H.2
  • 11
    • 1442307461 scopus 로고    scopus 로고
    • Polymer micromould design and micromoulding process
    • Zhao, J.; Mayes, R. H. Polymer micromould design and micromoulding process. Plast. Rubber. Compos. 2003, 32, 240.
    • (2003) Plast. Rubber. Compos. , vol.32 , pp. 240
    • Zhao, J.1    Mayes, R.H.2
  • 12
    • 1442307461 scopus 로고    scopus 로고
    • Polymer micromould design and micromoulding process
    • Zhao, J.; Mayes, R. H. Polymer micromould design and micromoulding process. Plast. Rubber. Compos. 2003, 32, 240.
    • (2003) Plast. Rubber. Compos. , vol.32 , pp. 240
    • Zhao, J.1    Mayes, R.H.2
  • 13
    • 0036543606 scopus 로고    scopus 로고
    • Study on numerical simulation and experiment of light guide plate in injection molding
    • Shen, Y. K.; Wu, W. Y. Study on numerical simulation and experiment of light guide plate in injection molding. Int. Commun. Heat Mass. 2002, 29, 423.
    • (2002) Int. Commun. Heat Mass , vol.29 , pp. 423
    • Shen, Y.K.1    Wu, W.Y.2
  • 14
    • 0030784085 scopus 로고    scopus 로고
    • Processing and physical property relationships in injection molded isotactic polypropylene. 1. Mechanical properties
    • Kalay, G.; Bevis, M. J. Processing and physical property relationships in injection molded isotactic polypropylene. 1. Mechanical properties. J. Polym. Sci. Polym. Phys. Ed. 1997, 35, 265.
    • (1997) J. Polym. Sci. Polym. Phys. Ed. , vol.35 , pp. 265
    • Kalay, G.1    Bevis, M.J.2
  • 15
    • 0037177010 scopus 로고    scopus 로고
    • Shear-enhanced crystallization in isotactic polypropylene. 3. Evidence for a kinetic pathway to nucleation
    • Kumaraswamy, G.; Kornfield, J. A. Shear-enhanced crystallization in isotactic polypropylene. 3. Evidence for a kinetic pathway to nucleation. Macromolecules 2002, 35, 1762.
    • (2002) Macromolecules , vol.35 , pp. 1762
    • Kumaraswamy, G.1    Kornfield, J.A.2
  • 16
    • 0742287102 scopus 로고    scopus 로고
    • Development of the skin layer in injection moulding: Phenomenological model
    • Viana, J. C. Development of the skin layer in injection moulding: phenomenological model. Polymer 2004, 45, 993.
    • (2004) Polymer , vol.45 , pp. 993
    • Viana, J.C.1
  • 17
    • 34249700318 scopus 로고    scopus 로고
    • Microinjection molding of thermoplastic polymers: A review
    • Giboz, J.; Copponnex, T.; M'el'e, P. Microinjection molding of thermoplastic polymers: a review. Micromech. Microeng. 2007, 17, 96.
    • (2007) Micromech. Microeng. , vol.17 , pp. 96
    • Giboz, J.1    Copponnex, T.2    M'el'e, P.3
  • 18
    • 20444456308 scopus 로고    scopus 로고
    • In-process monitoring of micromoulding-assessment of process variation
    • Whiteside, B. R.; Martyn, M. T.; Coates, P.D. In-process monitoring of micromoulding-assessment of process variation. Int. Polym. Process. 2005, 20, 162.
    • (2005) Int. Polym. Process. , vol.20 , pp. 162
    • Whiteside, B.R.1    Martyn, M.T.2    Coates, P.D.3
  • 19
    • 0034883056 scopus 로고    scopus 로고
    • Fracture behaviour of beta-polypropylene as a function of processing conditions
    • Nezbedova, E.; Pospisil, V. Fracture behaviour of beta-polypropylene as a function of processing conditions. Macromol. Symp. 2002, 170, 349.
    • (2002) Macromol. Symp. , vol.170 , pp. 349
    • Nezbedova, E.1    Pospisil, V.2
  • 20
    • 0030393845 scopus 로고    scopus 로고
    • Formation of beta-modification of isotactic polypropylene in its late stage of crystallization
    • Varga, J. G.; Ehrenstein, W. Formation of beta-modification of isotactic polypropylene in its late stage of crystallization. Polymer. 1996, 37, 5959.
    • (1996) Polymer , vol.37 , pp. 5959
    • Varga, J.G.1    Ehrenstein, W.2
  • 21
    • 0032166049 scopus 로고    scopus 로고
    • Alpha and beta phases of isotactic polypropylene: A case of growth kinetics "phase reentrency" in polymer crystallization
    • Lotz, B. Alpha and beta phases of isotactic polypropylene: a case of growth kinetics "phase reentrency" in polymer crystallization. Polymer 1998, 39, 4561.
    • (1998) Polymer , vol.39 , pp. 4561
    • Lotz, B.1
  • 22
    • 0032428117 scopus 로고    scopus 로고
    • On the deformation mechanisms of [beta]-polypropylene: 1. Effect of necking on [beta]-phase PP crystals
    • Li, J. X.; Cheung, W. L. On the deformation mechanisms of [beta]-polypropylene: 1. Effect of necking on [beta]-phase PP crystals. Polymer. 1998, 39, 6935.
    • (1998) Polymer , vol.39 , pp. 6935
    • Li, J.X.1    Cheung, W.L.2
  • 23
    • 0033117699 scopus 로고    scopus 로고
    • On the deformation mechanisms of [beta]-polypropylene: 2. Changes of lamellar structure caused by tensile load
    • Li, J. X.; Cheung, W. L. On the deformation mechanisms of [beta]-polypropylene: 2. Changes of lamellar structure caused by tensile load. Polymer. 1999, 40, 1219.
    • (1999) Polymer , vol.40 , pp. 1219
    • Li, J.X.1    Cheung, W.L.2
  • 24
    • 36549031703 scopus 로고    scopus 로고
    • Mechanical property, thermal property and crystal structure of isotactic polypropylene samples prepared by vibration injection molding
    • Zhang, J.; Zhu, J. Mechanical property, thermal property and crystal structure of isotactic polypropylene samples prepared by vibration injection molding. Polym. Bull. 2008, 59, 855.
    • (2008) Polym. Bull. , vol.59 , pp. 855
    • Zhang, J.1    Zhu, J.2
  • 25
    • 0005254361 scopus 로고    scopus 로고
    • Rules of supermolecular structure formation in sheared isotactic polypropylene melts
    • Varga, J.; Karger, K. J. Rules of supermolecular structure formation in sheared isotactic polypropylene melts. Polym. Sci. Polym. Phys. 1996, 34, 657.
    • (1996) Polym. Sci. Polym. Phys. , vol.34 , pp. 657
    • Varga, J.1    Karger, K.J.2
  • 26
    • 3943103989 scopus 로고    scopus 로고
    • Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites
    • Varga, J.; Karger-Kocsis, J. Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites. Polymer 1999, 36, 4877.
    • (1999) Polymer , vol.36 , pp. 4877
    • Varga, J.1    Karger-Kocsis, J.2
  • 27
    • 0035860054 scopus 로고    scopus 로고
    • Structure development during shear flow induced crystallization of i-PP: In situ wide-angle X-ray diffraction study
    • Somani, R. H.; Hsiao, B. S.; Nogales, A. Structure development during shear flow induced crystallization of i-PP: in situ wide-angle X-ray diffraction study. Macromolecules 2001, 34, 5902.
    • (2001) Macromolecules , vol.34 , pp. 5902
    • Somani, R.H.1    Hsiao, B.S.2    Nogales, A.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.