Characterization of pyrolytic products obtained from fast pyrolysis of chromated copper arsenate (CCA)- and alkaline copper quaternary compounds (ACQ)-treated wood biomasses

Journal of Hazardous Materials

Volumn 227-228, Issue , 2012, Pages 445-452

  Kim, Jae Young ^a   Kim, Tae Sung ^a   Eom, In Yong ^a,b   Kang, Sung Mo ^c   Cho, Tae Su ^d   Choi, In Gyu ^a   Choi, Joon Weon ^a  

^a Seoul National University   (South Korea)

^b Korea Research Institute of Chemical Technology   (South Korea)

^c Korea Forestry Promotion Institute   (South Korea)

^d Korea Forest Research Institute   (South Korea)

Author keywords

ACQ treated wood; Bio oil; CCA treated wood; Fast pyrolysis; Heavy metals

Indexed keywords

ALKALINE COPPER QUATERNARY; BIO OIL; CCA TREATED WOOD; CHROMATED COPPER ARSENATE; FAST PYROLYSIS; HIGHER HEATING VALUE; PHYSICOCHEMICAL PROPERTY; PYROLYTIC PRODUCTS; TRACE AMOUNTS; TREATED WOOD;

ALKALINITY; ARSENIC; CHROMIUM; COPPER; HEAVY METALS; WOOD PRESERVATION;

PYROLYSIS;

ARSENIC; ARSENIC ACID DERIVATIVE; CHROMIUM; CHROMIUM DERIVATIVE; COPPER; COPPER DERIVATIVE; OIL;

ARSENATE; BIOFUEL; BIOMASS; CHARCOAL; CHEMICAL ANALYSIS; CHEMICAL COMPOSITION; CHROMIUM; CONCENTRATION (COMPOSITION); COPPER COMPOUND; PH; PHYSICOCHEMICAL PROPERTY; PYROLYSIS; REACTION RATE; VISCOSITY; WATER CONTENT; WOOD;

ARTICLE; BIOMASS; CHEMICAL ANALYSIS; PH; PHYSICAL CHEMISTRY; PYROLYSIS; VISCOSITY; WATER CONTENT; WOOD;

AIR POLLUTANTS; ARSENATES; ARSENIC; BIOFUELS; BIOMASS; CHROMIUM; COPPER; HOT TEMPERATURE; QUATERNARY AMMONIUM COMPOUNDS; WOOD;

EID: 84862651277     PISSN: 03043894     EISSN: 18733336     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2012.05.052     Document Type: Article

References (30)

1. Hingston J., Collins C., Murphy R., Lester J. Leaching of chromated copper arsenate wood preservatives: a review. Environ. Pollut. 2001, 111:53-66.
2. Townsend T., Solo-Gabriele H., Tolaymat T., Stook K., Hosein N. Chromium, copper, and arsenic concentrations in soil underneath CCA-treated wood structures. Soil Sediment Contam. 2003, 12:779-798.
3. Thevenon M.F., Pizzi A., Haluk J.P. Protein borates as non-toxic, long-term, wide-spectrum, ground-contact wood preservatives. Holzforschung-Int. J. Biol. Chem. Phys. Technol. Wood 1998, 52:241-248.
4. Pizzi A., Baecker A. A new boron fixation mechanism for environment friendly wood preservatives. Holzforschung-Int. J. Biol. Chem. Phys. Technol. Wood 1996, 50:507-510.
5. Onuorah E.O. The wood preservative potentials of heartwood extracts of Milicia excelsa and Erythrophleum suaveolens. Bioresour. Technol. 2000, 75:171-173.
6. Goktas O., Mammadov R., Duru M.E., Ozen E., Colak A.M. Application of extracts from the poisonous plant, Nerium oleander L., as a wood preservative. Afr. J. Biotechnol. 2010, 6.
7. Hata T., Bronsveld P., Vystavel T., Kooi B., De Hosson J.T.M., Kakitani T., Otono A., Imamura Y. Electron microscopic study on pyrolysis of CCA (chromium, copper and arsenic oxide)-treated wood. J. Anal. Appl. Pyrolysis 2003, 68:635-643.
8. Humphrey D.G. The chemistry of chromated copper arsenate wood preservatives. Rev. Inorg. Chem. 2002, 22:1-40.
9. Humar M., Bokan M., Amartey S.A., Kalan P., Pohleven F. Fungal bioremediation of copper, chromium and boron treated wood as studied by electron paramagnetic resonance. Int. Biodeterior. Biodegrad. 2004, 53:25-32.
10. Helsen L., Van den Bulck E. Review of disposal technologies for chromated copper arsenate (CCA) treated wood waste, with detailed analyses of thermochemical conversion processes. Environ. Pollut. 2005, 134:301-314.
11. Smith R.L., Shiau R.J. An industry evaluation of the reuse, recycling, and reduction of spent CCA wood products. Forest Prod. J 1998, 48:44-48.
12. Helsen L., Van den Bulck E., Hery J. Total recycling of CCA treated wood waste by low-temperature pyrolysis. Waste Manage. 1998, 18:571-578.
13. Zou L.Y., Zhang W., Atkiston S. The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia. Environ. Pollut. 2003, 124:283-289.
14. Gullett B.K., Touati A., Hays M.D. PCDD/F, PCB, HxCBz, PAH, and PM. emission factors for fireplace and woodstove combustion in the San Francisco Bay region. Environ. Sci. Technol. 2003, 37:1758-1765.
15. Tame N.W., Dlugogorski B.Z., Kennedy E.M. Formation of dioxins and furans during combustion of treated wood. Prog. Energy Combust. Sci. 2007, 33:384-408.
16. Addink R., Olie K. Role of oxygen in formation of polychlorinated dibenzo-p-dioxins/dibenzofurans from carbon on fly ash. Environ. Sci. Technol. 1995, 29:1586-1590.
17. Bridgwater A. Principles and practice of biomass fast pyrolysis processes for liquids. J. Anal. Appl. Pyrolysis 1999, 51:3-22.
18. Kakitani T., Hata T., Kajimoto T., Imamura Y. Two possible pathways for the release of arsenic during pyrolysis of chromated copper arsenate (CCA)-treated wood. J. Hazard. Mater. 2004, 113:247-252.
19. Fu Q., Argyropoulos D.S., Tilotta D.C., Lucia L.A., Products Functional group distributions in pyrolysis oil of chromated copper arsenate (CCA)-treated wood, as elucidated by gas chromatography and a novel 31P NMR-based method. Ind. Eng. Chem. Res. 2007, 46:5258-5264.
20. Helsen L., Van den Bulck E., Mullens S., Mullens J. Low-temperature pyrolysis of CCA-treated wood: thermogravimetric analysis. J. Anal. Appl. Pyrolysis 1999, 52:65-86.
21. K.H. Kim, T.S. Kim, S.M. Lee, D.H. Choi, H.M. Yeo, I.G. Choi, J.W. Choi, Comparison of physicochemical features of biooils and biochars produced from various woody biomasses by fast pyrolysis. Renewable Energy. Accepted. 2012.
22. Zhang Q., Chang J., Wang T., Xu Y. Review of biomass pyrolysis oil properties and upgrading research. Energy Convers. Manage. 2007, 48:87-92.
23. Demirbas A. The influence of temperature on the yields of compounds existing in bio-oils obtained from biomass samples via pyrolysis. Fuel Process. Technol. 2007, 88:591-597.
24. Eom I.Y., Kim K.H., Kim J.Y., Lee S.M., Yeo H.M., Choi I.G., Choi J.W. Characterization of primary thermal degradation features of lignocellulosic biomass after removal of inorganic metals by diverse solvents. Bioresour. Technol. 2011, 102:3437-3444.
25. Tascioglu C., Cooper P., Ung T. Rate and extent of adsorption of ACQ preservative components in wood. Holzforschung 2005, 59:574-580.
26. Eom I.Y., Kim K.H., Kim J.Y., Lee S.M., Yeo H.M., Choi I.G., Choi J.W. Characterization of primary thermal degradation features of lignocellulosic biomass after removal of inorganic metals by diverse solvents. Bioresour. Technol. 2010.
27. Fu Q., Argyropoulos D.S., Tilotta D.C., Lucia L.A. Understanding the pyrolysis of CCA-treated wood. Part I. Effect of metal ions. J. Anal. Appl. Pyrolysis 2008, 81:60-64.
28. Gullu D., Demirba A. Biomass to methanol via pyrolysis process. Energy Convers. Manage. 2001, 42:1349-1356.
29. Oasmaa A., Meier D. Norms and standards for fast pyrolysis liquids. 1. Round robin test. J. Anal. Appl. Pyrolysis 2005, 73:323-334.
30. Demirbas A. Determination of calorific values of bio-chars and pyro-oils from pyrolysis of beech trunkbarks. J. Anal. Appl. Pyrolysis 2004, 72:215-219.