Insights into the effect of preparation variables on morphology and performance of polyacrylonitrile membranes using Plackett-Burman design experiments

Chemical Engineering Journal

Volumn 193-194, Issue , 2012, Pages 50-58

  Wang, Pan ^a   Wang, Zhiwei ^a   Wu, Zhichao ^a  

^a Tongji University   (China)

Author keywords

Membrane bioreactor; Membrane preparation; Phase inversion; Plackett Burman design; Polyacrylonitrile

Indexed keywords

CASTING SPEED; CASTING THICKNESS; FLAT-SHEET MEMBRANE; FOULING RATE; LINEAR CORRELATION; MEMBRANE BIOREACTOR; MEMBRANE PORE SIZE; MEMBRANE PREPARATION; PHASE INVERSION; PHASE-INVERSION METHOD; PLACKETT-BURMAN DESIGNS; POLYACRYLONITRILE MEMBRANES; PROCESSING FACTORS; PURE WATER;

BIOREACTORS; DESIGN; MEMBRANE FOULING; NONWOVEN FABRICS; POLYACRYLONITRILES;

MEMBRANES;

EID: 84862550197     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2012.04.017     Document Type: Article

References (28)

1. Kimura K., Yamato N., Yamamura H., Watanabe Y. Membrane fouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater. Environ. Sci. Technol. 2005, 39:6293-6299.
2. Miura Y., Watanabe Y., Okabe S. Membrane biofouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater: impact of biofilm formation. Environ. Sci. Technol. 2007, 41:632-638.
3. Yoon T.I., Lee H.S., Kim C.G. Comparison of pilot scale performances between membrane bioreactor and hybrid conventional wastewater treatment systems. J. Membr. Sci. 2004, 242:5-12.
4. Kim I.C., Yun H.G., Lee K.H. Preparation of asymmetric polyacrylonitrile membrane with small pore size by phase inversion and post-treatment process. J. Membr. Sci. 2002, 199:75-84.
5. Cornelissen E.R., Boomgaard T., Strathmann H. Physicochemical aspects of polymer selection for ultrafiltration and microfiltration membranes. Colloids Surf. A 1998, 138:283-289.
6. Han M.J., Nam S.T. Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane. J. Membr. Sci. 2002, 202:55-61.
7. Jung B., Yoon J.K., Kima B., Rheeb H.W. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes. J. Membr. Sci. 2004, 243:45-57.
8. Rahimpour A., Madaeni S.S., Amirinejad M., Mansourpanah Y., Zereshki S. The effect of heat treatment of PES and PVDF ultrafiltration membranes on morphology and performance for milk filtration. J. Membr. Sci. 2009, 330:189-224.
9. Feng C., Wang R., Shi B.L., Li G.M., Wu Y.L. Factors affecting pore structure and performance of poly(vinylidene fluoride-co-hexafluoro propylene) asymmetric porous membrane. J. Membr. Sci. 2006, 277:55-64.
10. Wang X., Wang X., Zhang L., An Q., Chen H. Morphology and formation mechanism of poly(vinylidene fluoride) membranes prepared with immerse precipitation: effect of dissolving temperature. J. Macromol. Sci.: Phys. 2009, 48:696-709.
11. Saljoughi M.S.E., Mohammadi T. Effect of preparation variables on morphology and pure water permeation flux through asymmetric cellulose acetate membranes. J. Membr. Sci. 2009, 326:627-634.
12. Idris A., Ismail A.F., Noordin M.Y., Shilton S.J. Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method. J. Membr. Sci. 2002, 205:223-237.
13. Chau J.L., Wang S.S., Guo C.L., Wei H., Lien T.C. Pilot production of polysulfone hollow fiber for ultrafiltration using orthogonal array experimentation. Ind. Chem. Res. 1995, 34:813-819.
14. Bulut M., Gevers L.E.M., Paul J.S., Vankelecom I.F.J., Jacobs P.A. Directed development of high-performance membranes via high-throughput and combinatorial strategies. J. Comb. Chem. 2006, 28:168-173.
15. Cawse J.N. Experimental strategies for combinatorial and high-throughput materials development. Acc. Chem. Res. 2001, 34:213-221.
16. Li X., Ouyang J., Xu Y., Chen M., Song X.Y., Yong Q., Yu S.Y. Optimization of culture conditions for production of yeast biomass using bamboo wastewater by response surface methodology. Bioresour. Technol. 2009, 100:3613-3617.
17. Liu R.S., Tang Y.J. Tuber melanosporum fermentation medium optimization by Plackett-Burman design coupled with Draper-Lin small composite design and desirability function. Bioresour. Technol. 2010, 101:3139-3146.
18. Ahmada A.L., Lowa S.C., Abd Shukora S.R., Ismail A. Optimization of membrane performance by thermal-mechanical stretching process using responses surface methodology (RSM). Sep. Purif. Technol. 2009, 66:177-186.
19. Wang Z.W., Yu G.P., Liu J.F., Zhou Z. Relationship between sludge characteristics and membrane flux determination in submerged membrane bioreactors. J. Membr. Sci. 2006, 284:87-94.
20. Wu J.L., Huang X. Effect of mixed liquor properties on fouling propensity in membrane bioreactors. J. Membr. Sci. 2009, 342:88-96.
21. Plackett R.L., Burman J.P. The design of optimum multifactorial experiments. Biometrika 1946, 33:305-325.
22. Azari S., Karimi M., Kish M.H. Structural properties of the poly(acrylonitrile) membrane prepared with different cast thicknesses. Ind. Eng. Chem. Res. 2010, 49:2442-2448.
23. Khulbe K.C., Matsuura T., Noh S.H. Effect of thickness of the PPO membranes on the surface morphology. J. Membr. Sci. 1998, 145:243-251.
24. Tsai H.A., Ciou Y.S., Hu C.C., Lee K.R., Yu D.G., Lai J.Y. Heat-treatment effect on the morphology and pervaporation performances of asymmetric PAN hollow fiber membranes. J. Membr. Sci. 2005, 255:33-47.
25. 2-derived nanotubes. J. Porous Mater. 2010, 17:719-726.
26. Dang H.T., Rana D., Narbaitz R.M., Matsuura T. Key factors affecting the manufacture of hydrophobic ultrafiltration membranes for surface water treatment. J. Appl. Polym. Sci. 2010, 116:2626-2637.
27. Wang X., Zhang L., Sun D., An Q., Chen H. Effect of coagulation bath temperature on formation mechanism of poly(vinylidene fluoride) membrane. J. Appl. Polym. Sci. 2008, 110:1656-1663.
28. Vandezande P., Li X.F., Gevers L.E.M., Vankelecom I.F.J. High throughput study of phase inversion parameters for polyimide-based SRNF membranes. J. Membr. Sci. 2009, 330:307-318.