Poly(acrylonitrile-butadiene-styrene) modified epoxy-amine systems Analyzed by FTIR and Modulated DSC

Journal of Macromolecular Science, Part B: Physics

Volumn 51, Issue 7, 2012, Pages 1425-1436

  Jyotishkumar, P ^a   Pionteck, J ^b   Huler, L ^b   Adam, G ^b   Thomas, S ^a  

^a MAHATMA GANDHI UNIVERSITY   (India)

^b LEIBNIZ INSTITUTE OF POLYMER RESEARCH DRESDEN   (Germany)

Author keywords

epoxy blends; glass transition; heat capacity; modulated DSC; vitrification

Indexed keywords

ACRYLONITRILE-BUTADIENE-STYRENE; BAND INTENSITY; CURING AGENTS; CURING DEGREE; DEGREE OF CURE; DIGLYCIDYL ETHER OF BISPHENOL-A; EPOXIDE GROUPS; EPOXY BLENDS; EPOXY NETWORK; EPOXYAMINE SYSTEM; FTIR; HEAT CAPACITY CHANGE; HEAT OF REACTION; MELT MIXING; MODULATED DSC;

BUTADIENE; ETHERS; GLASS TRANSITION; INFRARED SPECTROSCOPY; ORGANIC COMPOUNDS; POLYMER BLENDS; SPECIFIC HEAT; STYRENE; VITRIFICATION;

CURING;

EID: 84862019362     PISSN: 00222348     EISSN: 1525609X     Source Type: Journal    
DOI: 10.1080/00222348.2011.629853     Document Type: Article

References (30)

1. Goodman, S.H. Handbook of Thermoset Plastics, 2nd ed. Noyes Publications: Westwood, NJ, Chapter Epoxy Resins, 1999, pp. 193-268.
2. Fink, J.K. Epoxy Resins: Reactive Polymers Fundamentals and Applications. William Andrew: Norwich, NY, 2005, Chapter 3, pp. 139-240.
3. Hodgkin, J. Thermosets: Encyclopedia of Materials: Science and Technology. Elsevier: Amsterdam, 2008; pp. 9215-9221.
4. Varma, K.; Gupta, V.B. Thermosetting Resin-Properties: Comprehensive Composite Materials, Elsevier Science: Amsterdam, 2003, pp. 1-56.
5. Massingill, Jr. J.L.; Bauer, R.S. Applied Polymer Science: 21st Century, Elsevier: Amsterdam, 2000, pp. 393.
6. Strehmel, V.; Zimmermann, E.;Häusler, K.-G.; Fedtke, M. Influence of imidazole on the structure of epoxy amine networks. Progr. Colloid. Polym. Sci. 1992, 90, 206.
7. Jyotishkumar, P.; Pionteck, J.; Özdilek, C.; Moldenaers, P.; Cvelbar, C.; Mozetic, M.; Thomas, S. Rheology and pressure-volume-temperature behavior of the thermoplastic poly(acrylonitrilebutadiene- styrene)-modified epoxy-DDS system during reaction induced phase separation. Soft matter. 2011, 7, 7248.
8. Jyotishkumar, P.; Pionteck, J.; Häßler, R.; Francis, B.; George, S. M.; Cvelbar, U. Thomas, S. Studies on stress relaxation and thermomechanical properties of poly(acrylonitrile-butadienestyrene) modified epoxy-amine systems. Ind. Eng. Chem. Res. 2011, 50 4432
9. Mimura, K.; Ito, H.; Fujioka, H. Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins. Polymer 2000, 41, 4451.
10. Girard-Reydet, E.; Vicard, V.; Pascault, J.P.; Sautereau, H. Polyetherimide-modified epoxy networks: influence of cure conditions on morphology and mechanical properties. J. Appl. Polym. Sci. 1997, 65, 2433.
11. Cano, S.J.; Torres, A.; Abad, M.J.; Barral, L.; Diez, F.J.; Lopez, J.; Ramirez, C. Characterization of an ABS-modified epoxy system. Polym. Int. 2002, 51, 1268.
12. Prolongo, M.G.; Arribas, C.; Salom, C.; Masegosa, R.M. Phase separation, cure kinetics, and morphology of epoxy/poly(vinyl acetate) blends. J. Appl. Polym. Sci. 2007, 103, 1507.
13. Pieters, R.;Miltner, H.E.;Assche, G.V.; Mele, B.V.Kinetics of temperature-induced and reactioninduced phase separation studied by modulated temperature DSC. Macromol. Symp. 2006, 23, 36.
14. Liu, Y.; Zhong, X.; Yu, Y. Gelation behavior of thermoplastic-modified epoxy systems during polymerization-induced phase separation. Colloid. Polym. Sci. 2010, 288, 1561.
15. Yu, Y.; Zhang, Z.; Gan, W.; Wang, M.; Li, S. Effect of polyethersulfone on the mechanical and rheological properties of polyetherimide-modified epoxy systems. Ind. Eng. Chem. Res. 2003, 42, 3250.
16. Don, T.M.; Bell, J.P. Fourier transform infrared analysis of polycarbonate/epoxy mixtures cured with aromatic amine. J. Appl.Polym. Sci. 1998, 69, 2395.
17. Sabra, A.; Lam, T.M.; Pascault, J.P.; Grenier-Loustalot, M.F.; Grenier, P. Characterisation and behaviour of epoxy-based diaminodiphenyl sulfone networks. Polymer 1987, 28, 1030.
18. Strehmel, V.; Scherzer, T. Structural investigation of epoxy amine networks by mid and nearinfrared spectroscopy. Eur. Polym. J. 1994, 30, 361.
19. Su, C.C.; Kuo, J.F.; Woo, E.M. Miscibility and cure kinetics studies on blends of bisphenol- A polycarbonate and tetraglycidyl-4, 4'- diaminodiphenylmethane epoxy cured with an amine. J. Polym. Sci., Part B: Polym. Phys. 1995, 33, 2235.
20. Barral, L.; Cano, J.; Lopez, J.; Lopez-Bueno, I.; Nogueira, P.; Abad, M.J.; Ramirez, C. Kinetic studies of the effect of ABS on the curing of an epoxy/cycloaliphatic amine resin. J. Polym. Sci., Part B: Polym. Phys. 2000, 38, 351.
21. Müller, Y.;Häußler, L.; Pionteck. J.ABS-modified epoxy resins - curing kinetics, polymerization induced phase separation, and resulting morphologies. Macromol. Symp. 2007, 254, 267.
22. Francis, B.; Poel, G.V.; Posada, F.; Groeninckx, G.; Rao, V.L.; Ramaswamy, R.; Thomas. S. Cure kinetics and morphology of blends of epoxy resin with poly (ether ether ketone) containing pendant tertiary butyl groups. Polymer 2003, 44, 3687.
23. Swier, S.; Mele, B.V. Mechanistic modeling of the epoxy-amine reaction in the presence of polymeric modifiers by means of modulated temperature DSC. Macromolecules 2003, 36, 4424.
24. Assche, G.V.; Hemelrijck, A.V.; Rahier, H.; Van Mele, B. Modulated differential scanning calorimetry: isothermal cure and vitrification of thermosetting systems. Thermochim. Acta. 1995, 26, 121.
25. Assche, G.V.; Hemelrijck, A.V.;Rahier, H.;Mele, B.V. Modulated differential scanning alorimetry: Cure, vitrification and devitrification of thermosetting systems. Thermochim. Acta. 1997, 304/305, 317.
26. Jyotishkumar, P.; Ozdilek, C.; Moldenaers, P.; Sinturel, C.; Janke, A.; Pionteck, J.; Thomas, S. Dynamics of phase separation in poly(acrylonitrile- butadiene-styrene)-modified epoxy/DDS system: kinetics and viscoelastic effects. J. Phys. Chem. B. 2010, 114, 13271.
27. Lapprand, A.; Arribas, C.; Salom, C.; Masegosa, R.M.; Prolongo, M.G. Epoxy resins modified with poly(vinyl acetate). J. Mat. Proc. Tech. 2003, 827, 143.
28. Swier, S.; Assche, G.V.; Mele, B.V. Kinetics modeling and thermal properties of epoxy-amines as measured by modulated-temperature DSC. I. Linear step-growth polymerization of DGEBA + Aniline. J. Appl. Polym. Sci. 2004, 91, 2798.
29. Swier, S.; Assche, G.V.; Mele, B.V. Reaction kinetics modeling and thermal properties of epoxyamines as measured by modulated-temperature DSC. II. Network-forming DGEBA + MDA. J. Appl. Polym. Sci. 2004, 91, 2814.
30. Hameed, N.; Sreekumar, P.A.; Francis, B.; Yang, W.; Thomas, S. Morphology, dynamic mechanical and thermal studies on poly(styrene-co- acrylonitrile) modified epoxy resin/glass fibre composites. Composites: Part A. 2007, 38, 2422.