Numerical study on the effect of substrate size on the supersonic jet flow and temperature distribution within the substrate in cold spraying

Journal of Thermal Spray Technology

Volumn 21, Issue 3-4, 2012, Pages 628-635

  Yin, Shuo ^a   Wang, Xiao Fang ^a   Li, Wen Ya ^b   Li, Yue ^a  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

^b NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Bow shock; Cold spraying (CS); Numerical simulation; Substrate diameter; Substrate temperature; Supersonic jet

Indexed keywords

BOW SHOCKS; COLD SPRAYING; COMPUTATIONAL FLUID; FLOW REGIMES; INLET TEMPERATURE; NOZZLE EXITS; NUMERICAL STUDIES; PARTICLE ACCELERATION; PARTICLE IMPACT VELOCITIES; PARTICLE MOTIONS; SIMULATED RESULTS; SUBSTRATE SIZES; SUBSTRATE TEMPERATURE; SUBSTRATE THICKNESS; SUPERSONIC JET FLOW; SUPERSONIC JETS; THICK SUBSTRATES;

COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; NOZZLES; PLASMA SHOCK WAVES; SUPERSONIC AERODYNAMICS; TEMPERATURE DISTRIBUTION;

SUBSTRATES;

EID: 84861890827     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-011-9711-4     Document Type: Conference Paper

References (31)

1. H. Tabbara and S. Gu, Computational Simulation of Liquid-Fuelled HVOF Thermal Spraying, Surf. Coat. Technol., 2009, 204 (5), p 676-684
2. H. Tabbara, S. Gu, and D.G. McCartney, Computational Modelling of Titanium Particles in Warm Spray, Comput. Fluids, 2011, 44 (1), p 358-368
3. A.N. Papyrin, Cold Spray Technology, Adv. Mater. Process., 2001, 159 (9), p 49-51
4. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51 (15), p 4379-4394
5. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54 (3), p 729-742 (Pubitemid 43038767)
6. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56 (17), p 4858-4868
7. S. Yin, X.F. Wang, W.Y. Li, and B.P. Xu, Numerical Investigation on Effects of Interactions Between Particles on Coating Formation in Cold Spraying, J. Therm. Spray Technol., 2009, 18 (4), p 686-693
8. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25 (8), p 681-688 (Pubitemid 39102797)
9. W.Y. Li, S. Yin, and X.F. Wang, Numerical Investigations of the Effect of Oblique Impact on Particle Deformation in Cold Spraying by the SPH Method, Appl. Surf. Sci., 2010, 256 (12), p 3725-3734
10. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7 (2), p 205-212 (Pubitemid 128495173)
11. W.Y. Li and C.J. Li, Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space, J. Therm. Spray Technol., 2005, 14 (3), p 391-396
12. W.Y. Li, H. Liao, H.T. Wang, C.J. Li, G. Zhang, and C. Coddet, Optimal Design of Convergent-Barrel Cold Spray Nozzle by Numerical Method, Appl. Surf. Sci., 2006, 253 (2), p 708-713 (Pubitemid 44894201)
13. H. Tabbara, S. Gu, D.G. McCartney, T.S. Price, and P.H. Shipway, Study on Process Optimization of Cold Gas Spraying, J. Therm. Spray Technol., 2011, 20 (3), p 608-620
14. S. Yin, X.F. Wang, and W.Y. Li, Computational Analysis of the Effect of Nozzle Cross-Section Shape on Gas Flow and Particle Acceleration in Cold Spraying, Surf. Coat. Technol., 2011, 205 (8-9), p 2970-2977
15. T.C. Jen, L.J. Li, W.-Z. Cui, Q.H. Chen, and X.M. Zhang, Numerical Investigations on Cold Gas Dynamic Spray Process with Nano- and Microsize Particles, Int. J. Heat Mass Transf., 2005, 48 (21-22), p 4384-4396
16. S. Yin, X.F. Wang, W.Y. Li, and B.P. Xu, Numerical Study on the Effect of Substrate Angle on Particle Impact Velocity and Normal Velocity Component in Cold Gas Dynamic Spraying Based on CFD, J. Therm. Spray Technol., 2010, 19 (6), p 1155-1162
17. J. Pattison, S. Celotto, A. Dhan, and W. O'Neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol., 2008, 202 (8), p 1443-1454 (Pubitemid 350246287)
18. M. Fukumoto, H. Wada, K. Tanabe, M. Yamada, E. Yamaguchi, A. Niwa, M. Sugimoto, and M. Izawa, Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16 (5-6), p 643-650 (Pubitemid 350269015)
19. P.C. King, G. Bae, S.H. Zahiri, M. Jahedi, and C. Lee, An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates, J. Therm. Spray Technol., 2010, 19 (3), p 620-634
20. J.G. Legoux, E. Irissou, and C. Moreau, Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings, J. Therm. Spray Technol., 2007, 16 (5-6), p 619-626 (Pubitemid 350269012)
21. D. Zhang, P.H. Shipway, and D.G. McCartney, Cold Gas Dynamic Spraying of Aluminum: The Role of Substrate Characteristics in Deposit Formation, J. Therm. Spray Technol., 2005, 14 (1), p 109-116 (Pubitemid 40414870)
22. S. Yin, X.F. Wang, W.Y. Li, and H.E. Jie, Effect of Substrate Hardness on the Deformation Behavior of Subsequently Incident Particles in Cold Spraying, Surf. Coat. Technol., 2011, 57 (11), p 7560-7565
23. P.H. Gao, C.J. Li, G.J. Yang, Y.G. Li, and C.X. Li, Influence of Substrate Hardness Transition on Built-Up of Nanostructured WC-12Co by Cold Spraying, Appl. Surf. Sci., 2010, 256 (7), p 2263-2268
24. V.F. Kosarev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray Technol., 2003, 12 (2), p 265-281
25. S. Yin, X.F. Wang, W.Y. Li, and X.P. Guo, Examination on Substrate Pre-heating Process in Cold Gas Dynamic Spraying, J. Therm. Spray Technol., 2011, 20 (4), p 852-859
26. W.Y. Li, S. Yin, X.P. Guo, H.L. Liao, X.F. Wang, and C. Coddet, An Investigation on Temperature Distribution Within the Substrate and Nozzle Wall in Cold Spraying by Numerical and Experimental Methods, J. Therm. Spray Technol. (in press).doi:10.1007/s11666-011-9685-2
27. FLUENT Inc., Fluent 6.2 User Guide, 1999
28. R. Nickel, K. Bobzin, E. Lugscheider, D. Parkot, W. Varava, H. Olivier, and X. Luo, Numerical Studies of the Application of Shock Tube Technology for Cold Gas Dynamic Spray Process, J. Therm. Spray Technol., 2007, 16 (5-6), p 729-735 (Pubitemid 350269024)
29. T. Han, B.A. Gillispie, and Z.B. Zhao, An Investigation on Powder Injection in the High-Pressure Cold Spray Process, J. Therm. Spray Technol., 2009, 18 (3), p 320-330
30. S.A. Morsi and A.J. Alexander, An Investigation of Particle Trajectories in Two-Phase Flow Systems, J. Fluid Mech., 1972, 55 (2), p 193-208
31. J. Lee and S.J. Lee, The Effect of Nozzle Configuration on Stagnation Region Heat Transfer Enhancement of Axisymmetric Jet Impingement, Int. J. Heat Mass Transf., 2000, 43 (4), p 555-575