Analysis, manufacture and characterization of Ni/Cu functionally graded structures

Materials and Design

Volumn 41, Issue , 2012, Pages 255-265

  Rubio, Wilfredo Montealegre ^a   Paulino, Glaucio H ^b   Silva, Emilio Carlos Nelli ^c  

^a UNIVERSIDAD NACIONAL DE COLOMBIA   (Colombia)

^b University of Illinois at Urbana Champaign   (United States)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

A. Functionally graded structures; A. Nickel copper gradation; C. Spark plasma sintering

Indexed keywords

A. NICKEL/COPPER GRADATION; ENERGY DISPERSIVE SPECTROMETRY; EXPERIMENTAL AND NUMERICAL ANALYSIS; EXPERIMENTAL CHARACTERIZATION; FINITE ELEMENT CODES; FUNCTIONALLY GRADED STRUCTURE; GRADED FINITE ELEMENTS; MICRO INDENTATION; NUMERICAL MODELING; TWO RESONANCE FREQUENCIES; YOUNG'S MODULUS;

ELASTIC MODULI; ELASTICITY; HARDNESS; MATLAB; MODAL ANALYSIS; NUMERICAL ANALYSIS; OPTICAL MICROSCOPY; SCANNING ELECTRON MICROSCOPY; SPARK PLASMA SINTERING;

CHARACTERIZATION;

EID: 84861631593     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2012.04.038     Document Type: Article

References (46)

1. Aboudi J., Pindera M.J., Arnold S.M. Higher-order theory for functionally graded materials. Compos Part B - Eng 1999, 30:777-832.
2. Kieback B., Neubrand A., Riedel H. Processing techniques for functionally graded materials. Mater Sci Eng A 2003, 362:81-105.
3. Reiter T., Dvorak G.J., Tvergaard V. Micromechanical models for graded composite materials. J Mech Phys Solids 1997, 45:1281-1302.
4. Yin H.M., Sun L.Z., Paulino G.H. Micromechanics-based elastic model for functionally graded materials with particle interactions. Acta Marter 2004, 52:3535-3543.
5. Koizumi M. FGM activities in Japan. Compos Part B: Eng 1997, 28:1-4.
6. Embury J.D., Freund L.B., Needleman A., Shih C.F., Spaepen F., Suresh S. Summary. J Mech Phys Solids 1996, 44:823-825.
7. Yu M.H., Zhou B., Bi D.B., Shaw D. Preparation of graded multilayer materials and evaluation of residual stresses. Mater Des 2010, 31:2478-2482.
8. Chiu T.-C., Erdogan F. One-dimensional wave propagation in a functionally graded elastic medium. J Sound Vib 1999, 222:453-487.
9. Asghari M., Ahmadian M.T., Kahrobaiyan M.H., Rahaeifard M. On the size-dependent behavior of functionally graded micro-beams. Mater Des 2010, 31:2324-2329.
10. Pindera M.-J., Aboudi J., Arnold S.M. Limitations of the uncoupled, RVE-based micromechanical approach in the analysis of functionally graded composites. Mech Mater 1999, 20:77-94.
11. Hashin Z. Analysis of composite materials, a survey. J Appl Mech 1983, 50:481-505.
12. Praveen G.N., Reddy J.N. Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. Int J Solids Struct 1998, 35:4457-4476.
13. Reddy J.N. Analysis of functionally graded plates. Int J Numer Methods Eng 2000, 47:663-684.
14. Chakraborty A., Gopalakrishnan S., Kausel E. Wave propagation analysis in inhomogeneous piezo-composite layer by the thin layer method. Int J Numer Methods Eng 2005, 64:567-598.
15. Chakraborty A., Gopalakrishnan S. A spectral formulated finite element for wave propagation analysis in functionally graded beams. Int J Solids Struct 2003, 40:2421-2448.
16. Banks-Sills L., Eliasi R., Berlin Y. Modeling of functionally graded materials in dynamic analyses. Compos Part B: Eng 2002, 33:7-15.
17. Rubio W.M., Buiochi F., Adamowski J.C., Silva E.C.N. Modelling of functionally graded piezoelectric ultrasonic transducers. Ultrasonics 2009, 49:484-494.
18. Kim J.H., Paulino G.H. Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials. J Appl Mech-Trans ASME 2002, 69:502-514.
19. Santare M.H., Lambros J. Use of graded finite elements to model the behavior of nonhomogeneous materials. J Appl Mech 2000, 67:819-822.
20. Rubio W.M., Paulino G.H., Silva E.C.N. Tailoring vibration mode shapes using topology optimization and functionally graded material concepts. Smart Mater Struct 2011, 20:025009.
21. Santare M.H., Thamburaj P., Gazona G.A. The effect of graded strength on damage propagation in continuously nonhomogeneous materials. J Eng Mater Technol 2003, 125:412-417.
22. Zhang Z., Paulino G.H. Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements. Int J Solids Struct 2007, 44:3601-3626.
23. Silva E.C.N., Carbonari R.C., Paulino G.H. On graded elements for multiphysics applications. Smart Mater Struct 2007, 16:2408-2428.
24. Parameswaran V., Shukla A. Dynamic fracture of a functionally gradient material having discrete property gradation. J Mater Sci 1998, 33:3303-3311.
25. Parameswaran V., Shukla A. Processing and characterization of a model functionally gradient material. J Mater Sci 2000, 35:21-29.
26. Rousseau C.-E., Tippur H.V. Influence of elastic variations on crack initiation in functionally graded glass-filled epoxy. Eng Fract Mech 2002, 69:1679-1693.
27. Wattanasakulpong N., Prusty B.G., Kelly D.W., Hoffman M. Free vibration analysis of layered functionally graded beams with experimental validation. Mater Des 2012, 36:182-190.
28. Winter A., Corff B., Reimanis I., Rabin B. Fabrication of graded nickel-alumina composites with a thermal-behavior-matching process. J Am Ceram Soc 2004, 83:2147-2154.
29. Lin X., Yue T., Yang H., Huang W. Phase evolution in laser rapid forming of compositionally graded Ti-Ni alloys. J Eng Mater Technol 2009, 131:1-5.
30. Zienkiewicz O.C., Taylor R.L. The finite element method 1991, McGraw-Hill, London, New York. 4th ed.
31. Munir Z.A., Anselmi-tamburini U., Ohyanagi M. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. J Mater Sci 2006, 41:763-777.
32. Tokita M. Mechanism of Spark Plasma Sintering (SPS). In: Proceedings of 2000 powder metallurgy world congress; 2000. p. 729-32.
33. Zhang Z.-H., Wang F.-C., Wang L., Li S.-K. Ultrafine-grained copper prepared by spark plasma sintering process. Mater Sci Eng A 2008, 476:201-205.
34. Zhang Z.-H., Wang F.-C., Wang L., Li S-K., Shen M., Osamu S. Microstructural characteristics of large-scale ultrafine-grained copper. Mater Charact 2008, 59:329-333.
35. Yao X., Huang Z., Cheng L., Jiang D., Tan S., Michel D., et al. Alumina-nickel composites densified by spark plasma sintering. Mater Lett 2005, 59:2314-2318.
36. Grieken R.V., Markowicz A., Török S. Energy-dispersive X-ray spectrometry: present state and trends. Fresen J Anal Chem 1986, 324:825-831.
37. ASTM Standard E384-09. Standard test method for microindentation hardness of materials. West Conshohocken, PA: ASTM International; 2003.
38. Oliver W.C., Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. Mater Res Soc 2004, 19:3-20.
39. Meza J., Franco E., Farias M., Buiochi F., Souza M., Cruz J. Medición del módulo de elasticidad en materiales de ingeniería utilizando La técnica de indentación instrumentada y de ultrasonido. Revista de Metalurgia 2008, 44:52-65.
40. Lawn B.R., Howes V.R. Elastic recovery at hardness indentations. J Mater Sci 1981, 16:2745-2752.
41. Marshall D.B., Noma T., Evans A.G. A simple method for determining elastic modulus to hardness ratios using Knoop indentation. Int J Am Ceram Soc 1982, 65:c175-c176.
42. Beaton C.F., Hewitt G.F., Liley P.E. Physical property data for the design engineer 1989, Hemisphere Publishing Corporation, New York.
43. Kino G. Acoustic waves: devices, imaging, and analog signal processing 2000, Prentice-Hall, Inc., New Jersey. Corrected ed.
44. Ewins D.J. Modal testing: theory and practice 1988, Research Studies Press, England.
45. Skaf A., Nassar F., Lefebvre B., Nongaillard B. A new acoustic technique to monitor bread dough during the fermentation phase. J Food Eng 2009, 93:365-378.
46. Rubio WM. Otimização topológica de transdutores piezelétricos com gradação funcional de material: projeto, simulação, análise e fabricação. PhD thesis, University of São Paulo; 2010.