Fabrication of graded nickel-alumina composites with a thermal-behavior-matching process

Journal of the American Ceramic Society

Volumn 83, Issue 9, 2000, Pages 2147-2154

  Winter, Andrew N ^a   Corff, Brian A ^a   Reimanis, Ivar E ^a   Rabin, Barry H ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; MICROSTRUCTURE; NICKEL; PARTICLE SIZE ANALYSIS; PRESSING (FORMING); SINTERING;

NICKEL-ALUMINA COMPOSITES;

CERAMIC MATRIX COMPOSITES;

EID: 0034275697     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2000.tb01528.x     Document Type: Article

References (39)

1. M. Grujicic and H. Zhao, "Optimization of 316 Stainless Steel/Alumina Functionally Graded Material for Reduction of Damage Induced by Thermal Residual Stresses," Mater. Sci. Eng. A, A252, 117-32 (1998).
2. O. Guthmann, A. Reller, B. Kastening, and J. Rodel, "Processing of Gradient Materials with Directed Oxidation of Carbon Foams"; pp. 179-84 in 3rd International Symposium on Structural and Functional Gradient Materials (Oct. 10-12, 1994, Swiss Federal Institute of Technology, Lausanne, Switzerland). Presses Polytechniques et Universitaires Romandes, 1995.
3. D. Jankovic, D. Kicevic, and M. Mitkov, "Nickel-Alumina Composites Produced by Pressureless Sintering and Hot Pressing," Sci. Sintering, 30 [1] 105-10 (1998).
4. Y.-G. Jung and S.-C. Choi, "Fabrication of 3Y-TZP/SUS304 Functionally Graded Materials by Slip Casting: Application of Porous Alumina Molds," Mater. Lett., 37, 312-19 (1998).
5. T. Jungling, J. Bromback, and B. Kieback, "Ceramic-Metal Functional Gradient Materials by Sedimentation"; see Ref. 2, pp. 161-66.
6. U. Leushake, A. Winter, B. H. Rabin, and B. Corff, "General Aspects of FGM Fabrication by Powder Stacking"; pp. 13-18 in Materials Science Forum, Vol. 308-311, Functionally Graded Materials. Trans Tech Publications, Aedermannsdorff, Switzerland, 1999.
7. T. Nagano and F. Wakai, "Fabrication of Zirconia-Alumina Functionally Gradient Material by Superplastic Diffusion Bonding," J. Mater. Sci., 28 [21] 5793-99 (1993).
8. B. H. Rabin and R. L. Williamson, "Graded Ceramic-Metal Microcomposites for Controlling Interface Stress"; pp. 103-13 in Microcomposites and Nanophase Materials: Proceedings of a Symposium. The Minerals, Metals, and Materials Society, Warrendale, PA, 1991.
9. B. H. Rabin, R. L. Williamson, R. J. Heaps, and A. W. Erickson, "Powder Processing of Nickel-Aluminum Oxide Gradient Materials," Part. Mater. Processes, 9, 1-9 (1992).
10. 3 FGM"; pp. 173-80 in Ceramic Transactions, Vol. 34, Functionally Gradient Materials. Edited by J. B. Holt, M. Koizumi, T. Hirai, and Z. A. Munir. American Ceramic Society, Westerville, OH, 1993.
11. B. H. Rabin and R. L. Williamson, "Design and Fabrication of Ceramic-Metal Gradient Materials"; pp. 145-54 in Processing and Fabrication of Advanced Materials III (Oct. 17-21, 1993, Pittsburgh, PA). The Minerals, Metals, and Materials Society. Warrendale, PA, 1994.
12. A. Salito and G. Barbezat, "Plasma Spraying Techniques for Functional Gradient Coatings"; see Ref. 2, pp. 123-28.
13. 3/Y-TZP Continuous Functionally Graded Ceramics by Filtration-Sedimentation," J. Eur. Ceram. Soc., 17, 1551-54 (1997).
14. P. Sarkar, S. Datta, and S. Nicholson, "Functionally Graded Ceramic/Ceramic and Metal/Ceramic Composites by Electrophoretic Deposition," Composites (Guildford UK), Part B, 28 [1-2] 49-56 (1997).
15. E. D. Steffler and A. N. Winter, "Interferometric Experimental Results Compared to FEA for a Functionally Graded Material"; in Proceedings of the Society of Experimental Mechanics Annual Conference on Theoretical, Experimental, and Computational Mechanics (June 7-9, 1999, Cincinnati, OH), in press.
16. 2/NiAl Produced by the Combustion Synthesis Process"; pp. 47-57 in Ceramic Transactions, Vol. 76, Functionally Graded Materials: Manufacture, Properties, and Applications. Edited by A. Ghosh, I. Reimanis, Y. Miyamoto, and J. J. Lannutti. American Ceramic Society, Westerville, OH, 1997.
17. S. Usmani and S. Sampath, "Erosion Studies on Duplex and Graded Ceramic Overlay Coatings," J. Mater., [November] 51-54 (1996).
18. 3 Composites With and Without Graded Microstructures," Ceram. Eng. Sci. Proc., 19 [4] 379-86 (1998).
19. 2/NiCrCoAlY Graded Coating by Plasma Spraying," Surf. Coat. Technol., 88, 66-69 (1996).
20. 2/ SUS316 Functionally Graded Materials by Tape Casting," Mater. Lett., 37, 304-11 (1998).
21. 3/Ni Nanocomposites," J. Eur. Ceram. Soc., 19, 463-68 (1998).
22. X. Sun and J. A. Yeomans, "Microstructure and Fracture Toughness on Nickel Particle Toughened Alumina Matrix Composites," J. Mater. Sci. 31, 875-80 (1996).
23. 3/Ni Composites," Ceram. Proc., 46, 335-44 (1990).
24. 3 Composites," J. Eur. Ceram. Soc., 17, 735-41 (1997).
25. 3 Ceramic Composites," J. Eur. Ceram. Soc., 15, 225-32 (1995).
26. 3 Interfaces," Acta Metall. Mater., 39 [8] 1915-24 (1991).
27. P. Lourdin, D. Juve, and D. Treheux, "Nickel-Alumina Bonds: Mechanical Properties Related to Interfacial Chemistry," J. Eur. Ceram. Soc., 16, 745-52 (1996).
28. R. L. Williamson, B. H. Rabin, and J. T. Drake, "Finite Element Analysis of Thermal Residual Stresses at Graded Ceramic-Metal Interfaces, Part I. Model Description and Geometrical Effects," J. Appl. Phys., 74 [2] 1310-20 (1993).
29. R. L. Williamson, B. H. Rabin, and G. E. Byerly, "FEM Study of the Effects of Interlayers and Creep in Reducing Stresses and Strains in Ceramic-Metal Joints," Compos. Eng., 5 [7] 851-63 (1995).
30. 3-Ni Joint Bonded with a Composite Interlayer: Experimental Measurements and FEM Analyses," J. Am. Ceram. Soc., 81 [6] 1541-49 (1998).
31. R. L. Williamson and J. T. Drake, "Assessing Thermal Residual Stress Reduction from Composition Grading at Material Interfaces: A Numerical Modeling Study," pp. 1361-67 in Advanced Composites '93: International Conference on Advanced Composite Materials (Feb. 15-19, 1993, Wollongon, Australia). The Minerals, Metals, and Materials Society, Warrendale, PA, 1994.
32. Z. H. Jin and R. C. Batra, "Some Basic Fracture Mechanics Concepts in Functionally Graded Materials," J. Mech. Phys. Solids, 44 [3] 1221-35 (1996).
33. C. Li and Z. Zou, "Stress Intensity Factors for a Functionally Graded Material Cylinder with an External Circumferencial Crack," Fatigue Fract. Eng. Mater. Struct., 21, 1447-57 (1998).
34. P. Gu and R. J. Asaro, "Cracks in Functionally Graded Materials," Int. J. Solid Struct., 34 [1] 1-17 (1997).
35. Y. Lee and F. Erdogan, "Interface Cracking of FGM Coatings Under Steady-State Heat Flow," Eng. Fract. Mech., 59 [3] 361-80 (1998).
36. A. Kawasaki and R. Watanabe, "Evaluation of Thermomechanical Performance for Thermal Barrier Type of Sintered Functionally Graded Materials," Composites (Guildford UK), Part B, 28B, 29-35 (1997).
37. M. Gasik, "Micromechanical Modelling of Functionally Graded Materials," Comput. Mater. Sci., 13, 42-55 (1998).
38. G. Qian, T. Nakamura, C. Berndt, and S. Leigh, "Tensile Toughness Test and High Temperature Fracture Analysis of Thermal Barrier Coatings," Acta Mater., 45 [4] 1767-84 (1997).
39. 3 Composites with Graded Microstructures; Deformation Analysis with Phase Shifted Moire Interferometry"; Ph.D. Thesis. Dept. of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, CO, 1999.