Total cost analysis of process time reduction as a green machining strategy

Leveraging Technology for a Sustainable World - Proceedings of the 19th CIRP Conference on Life Cycle Engineering

Volumn , Issue , 2012, Pages 299-304

  Helu, Moneer ^a   Behmann, Benjamin ^b   Meier, Harald ^b   Dornfeld, David ^a   Lanza, Gisela ^b   Schulze, Volker ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

Author keywords

Green machining; Life cycle; Reliability; Titanium; Turning

Indexed keywords

COST ACCOUNTING; COST REDUCTION; ENVIRONMENTAL IMPACT; LIFE CYCLE; MANUFACTURE; RELIABILITY; TITANIUM; TURNING;

COST ANALYSIS; GREEN MACHINING; PART QUALITY; PROCESS TIME REDUCTION; TITANIUM MACHINING;

COST BENEFIT ANALYSIS;

EID: 84861629373     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1007/978-3-642-29069-5_51     Document Type: Conference Paper

References (25)

1. Helu, M.; Rühl, J.; Dornfeld, D.; Werner, P.; Lanza, G. (2011): Evaluating Trade-offs Between Sustainability, Performance, and Cost of Green Machining Technologies, in: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering (LCE2011), pp. 195-200, Braunschweig, Germany.
2. Norris, G. A. (2001): Integrating Life Cycle Cost Analysis and LCA, in: International Journal of Life Cycle Assessment, Vol. 6, No. 2, pp. 118-120.
3. Kicherer, A.; Schaltegger, S.; Tschochohei, H.; Pozo, B. F. (2007): Eco-Efficiency: Combining Life Cycle Assessment and Life Cycle Costs via Normalization, in: International Journal of Life Cycle Assessment, Vol. 12, No. 7, pp. 537-543.
4. Bierer, A.; Götze, U. (2011): A Target Costing-Based Approach for Design to Energy Efficiency, in: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering (LCE2011), pp. 635-640, Braunschweig, Germany.
5. Anderberg, S. E.; Kara, S.; Beno, T. (2010): Impact of Energy Efficiency on Computer Numerically Controlled Machining, in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 224, No. 4, pp. 531-541.
6. Branker, K.; Jeswiet, J.; Kim, I. Y. (2011): Greenhouse Gases Emitted in Manufacturing a Product - A New Economic Model, in: Annals of the CIRP, Vol. 60, No. 1, pp. 53-56.
7. Martinez, S.; Hassanzadeh, M.; Bouzidi, Y.; Antheaume, N. (2011): Life Cycle Costing Assessment with both Internal and External Costs Estimation, in: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering (LCE2011), pp. 641-646, Braunschweig, Germany.
8. Fratila, D. (2009): Evaluation of Near-Dry Machining Effects on Gear Milling Process Efficiency, in: Journal of Cleaner Production, Vol. 17, No. 9, pp. 839-845.
9. Mativenga, P. T.; Rajemi, M. F. (2011): Calculation of Optimum Cutting Parameters Based on Minimum Energy Footprint, in: Annals of the CIRP, Vol. 60, No. 1, pp. 149-152.
10. Hermann, C.; Thiede, S.; Kara, S.; Hesselbach, J. (2011): Energy Oriented Simulation of Manufacturing Systems - Concept and Application, in: Annals of the CIRP, Vol. 60, No. 1, pp. 45-48.
11. Kong, D.; Choi, S.; Yasui, Y.; Pavanaskar, S.; Dornfeld, D.; Wright, P. (2011): Software-Based Tool Path Evaluation for Environmental Sustainability, in: Journal of Manufacturing Systems, Vol. 4, No. 4, pp. 241-247.
12. Sheng, P.; Srinivasan, M. (1995): Multi-Objective Process Planning in Environmentally Conscious Manufacturing: A Feature-Based Approach, in: Annals of the CIRP, Vol. 44, No. 1, pp. 433-437.
13. Avram, O.; Stroud, I.; Xirouchakis, P. (2011): A Multi-Criteria Decision Method for Sustainability Assessment of the Use Phase of Machine Tool Systems, in: International Journal of Advanced Manufacturing Technology, Vol. 53, No. 5-8, pp. 811-828.
14. Lanza, G.; Werner, P.; Niggeschmidt, S. (2009): Adapted Reliability Prediction by Integrating Mechanical Load Impacts, in: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), pp. 83-88, Fort Worth, Texas.
15. Lanza, G.; Behmann, B. (2011): Advanced Steps to Optimize the Serviceability, in: Proceedings of Advances in Production Management Systems (APMS 2011), Stavanger, Norway.
16. Abernethy, R. B. (2000): The New Weibull Handbook, 5th Ed., Robert B. Abernethy, North Palm Beach, Florida.
17. Nelson, W. (1990): Accelerated Testing: Statistical Models, Test Plans, and Data Analyses, Wiley, New York.
18. Lanza, G.; Niggeschmidt, S.; Werner, P. (2009): Optimization of Preventive Maintenance and Spare Part Provision for Machine Tools Based on Variable Operational Conditions, Annals of the CIRP, Vol. 58, No. 1, pp. 429-432.
19. Kara, S.; Li, W. (2011): Unit Process Energy Consumption Models for Material Removal Processes, in: Annals of the CIRP, Vol. 60, No. 1, pp. 37-40.
20. Stadtwerke Karlsruhe (2011): Strompreise - Gültig ab 01.02.2011, available at: http://www.stadtwerkekarlsruhe.de/swka-de/inhalte/produkte/strom/strompreise.php, downloaded on: 10/28/2011.
21. Stadtwerke Karlsruhe (2010): Energieträgermix der Stadtwerke Karlsruhe, available at: http://www.stadtwerkekarlsruhe.de/swkade/PDF/Service/Infomaterial/Strom-Energietraegermix.pdf, downloaded on: 10/28/2011.
22. Dearnley P.-A.; Grearson A.-N. (1986): Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for a Machining Titanium Alloy IMI 318, in: Materials Science and Technology, Vol. 2, No. 1, pp. 47-58
23. Dahmus J.-B.; Gutowski T.-G. (2004): An Environmental Analysis of Machining, in: Proceedings of ASME International Mechanical Engineering Congress and RD&D Expo (IMECE2004), pp. 1-10, Anaheim, California.
24. Ulutan, D.; Ozel, T. (2011): Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review, in: International Journal of Machine Tools and Manufacture, Vol. 51, pp. 250-280.
25. Helu, M.; Vijayaraghavan, A.; Dornfeld, D. (2011): Evaluating the Relationship Between Use Phase Environmental Impacts and Manufacturing Process Precision, in: Annals of the CIRP, Vol. 60, No. 1, pp. 49-52.