The effect of temperature on the hydration of composite cements containing limestone powder and fly ash

Materials and Structures/Materiaux et Constructions

Volumn 45, Issue 7, 2012, Pages 1101-1114

  De Weerdt, K ^a   Haha, M Ben ^b   Le Saout, G ^b   Kjellsen, K O ^c,d   Justnes, H ^a   Lothenbach, B ^b  

^a SINTEF   (Norway)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^c NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

^d HeidelbergCement Benelux   (Norway)

Author keywords

Blended cements; Degree of reaction; Fly ash; Limestone; Microstructure; Temperature

Indexed keywords

BLENDED CEMENT; BOUND WATERS; COMPOSITE CEMENTS; CURING TEMPERATURE; DEGREE OF HYDRATION; DEGREE OF REACTION; DOMINATING FACTORS; EFFECT OF TEMPERATURE; HYDRATION PRODUCTS; INHOMOGENEOUS DISTRIBUTION; LIMESTONE POWDER; ORDINARY PORTLAND CEMENT;

COMPRESSIVE STRENGTH; CURING; FLY ASH; HYDRATED LIME; HYDRATION; LIMESTONE; MECHANICAL PROPERTIES; MICROSTRUCTURE; MORTAR; POROSITY; TEMPERATURE;

CEMENTS;

EID: 84861583487     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-011-9819-5     Document Type: Article

References (45)

1. Ben Haha M, Gallucci E, Guidoum A, Scrivener KL (2007) Relation of expansion due to alkali silica reaction to the degree of reaction measured by SEM image analysis. Cem Concr Res 37(8):1206-1214
2. Ben Haha M, De Weerdt K, Lothenbach B (2010) Quantification of the degree of reaction of fly ash. Cem Concr Res 40(11):1620-1629
3. Bentz DP (2006) Modeling the influence of limestone filler on cement hydration using CEMHYD3D. Cem Concr Compos 28(2):124-129
4. Bonavetti V, Rahhal V, Irassar E (2001) Studies on the carboaluminate formation in limestone filler-blended cements. Cem Concr Res 31(6):853-859
5. Bonavetti V, Donza H, Menéndez G, Cabrera O, Irassar EF (2003) Limestone filler cement in low w/c concrete: a rational use of energy. Cem Concr Res 33(6):865-871
6. Cyr M, Lawrence P, Ringot E (2005) Mineral admixtures in mortars: quantification of the physical effects of inert materials on short-term hydration. Cem Concr Res 35(4): 719-730
7. Dalziel JA, Gutteridge WA (1986) The influence of pulverized-fuel ash upon the hydration characteristics and certain physical properties of a Portland cement paste. Cement and Concrete Association: Technical Report, Wexham Springs
8. De Weerdt K, Justnes H (2009) Synergic reactions in triple blended cements. In: 11th NCB international seminar on cement and building materials, New Delhi. Viba Press Pvt. Ltd., New Delhi, pp 257-261
9. De Weerdt K, Justnes H, Kjellsen KO, Sellevold E (2010) Fly ash -limestone ternary composite cements: synergetic effect at 28 days. Nordic Concr Res 42(2):51-70
10. De Weerdt K, Ben Haha M, Le Saout G, Kjellsen KO, Justnes H, Lothenbach B (2011) Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash. Cem Concr Res 41(3):279-291
11. De Weerdt K, Kjellsen KO, Sellevold EJ, Justnes H (2011) Synergy between fly ash and limestone powder in ternary cements. Cem Concr Compos 33(1):30-38
12. De Weerdt K, Sellevold EJ, Justnes H, Kjellsen KO (2011) Fly ash-limestone ternary cements: effect of component fineness. Adv Cem Res 23(4):203-214
13. Escalante-García JI (2003) Nonevaporable water from neat OPC and replacement materials in composite cements hydrated at different temperatures. Cem Concr Res 33(11): 1883-1888
14. Escalante-García JI, Sharp JH (1998) Effect of temperature on the hydration of the main clinker phases in Portland cements: Part I, neat cements. Cem Concr Res 28(9): 1245-1257
15. Escalante-García JI, Sharp JH (1998) Effect of temperature on the hydration of the main clinker phases in Portland cements: Part II, blended cements. Cem Concr Res 28(9): 1259-1274
16. Escalante-García JI, Sharp JH (2001) The microstructure and mechanical properties of blended cements hydrated at various temperatures. Cem Concr Res 31(5):695-702
17. Escalante-García JI, Sharp JH (2004) The chemical composition and microstructure of hydration products in blended cements. Cem Concr Compos 26(8):967-976
18. Escalante-García JI, Gómez LY, Johal KK, Mendoza G, Mancha H, Méndez J (2001) Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions. Cem Concr Res 31(10):1403-1409
19. Famy C, Scrivener KL, Crumbie AK (2002) What causes differences of C-S-H gel grey levels in backscattered electron images? Cem Concr Res 32(9):1465-1471
20. Gómez-Zamorano LY, Escalante-García JI (2010) Effect of curing temperature on the nonevaporable water in Portland cement blended with geothermal silica waste. Cem Concr Compos 32(8):603-610
21. Halse Y, Jensen H-U, Pratt PL (1986) The effect of the curing temperature on the pozzolanic reaction in fly ash blended cement. In: 8th ICCC, Rio de Janeiro, Brasil, pp 176-182
22. Hawkins P, Tennis P, Detwiler R (2003) The use of limestone in Portland cement: a state-of-the-art review. EB227. Portland Cement Association, Skokie
23. Hoshino S,Yamada K,Hirao H (2006) XRD/Rietveld analysis of the hydration and strength development of slag and limestone blended cement. J Adv Concr Technol 4(3):357-367
24. Justnes H (1998) Kinetics of reaction in cementitious pastes containing silica fume as studied by 29Si NMR. In: Colombet P, Grimmer AR, Zanni H, Soozzani P (eds) Nuclear magnetic resonance spectroscopy of cement-based materials. Springer, Berlin, pp 245-267
25. Kakali G, Tsivilis S, Aggeli E, Bati M (2000) Hydration products of C3A, C3S and Portland cement in the presence of CaCO3. Cem Concr Res 30(7):1073-1077
26. KjellsenKO(1996) Heat curing and post-heat curing regimes of high-performance concrete: influence on microstructure and C-S-H composition. Cem Concr Res 26(2):295-307
27. Kjellsen KO, Detwiler RJ (1992) Reaction kinetics of Portland cement mortars hydrated at different temperatures. Cem Concr Res 22(1):112-120
28. Kjellsen KO, Detwiler RJ, Gjørv OE (1990) Backscattered electron imaging of cement pastes hydrated at different temperatures. Cem Concr Res 20(2):308-311
29. Kjellsen KO, Detwiler RJ, Gjørv OE (1990) Pore structure of plain cement pastes hydrated at different temperatures. Cem Concr Res 20(6):927-933
30. Kjellsen KO, Detwiler RJ, Gjørv OE (1991) Development of microstructures in plain cement pastes hydrated at different temperatures. Cem Concr Res 21(1):179-189
31. Le Saout G, Lécolier E, Rivereau A, Zanni H (2006) Chemical structure of cement aged at normal and elevated temperatures and pressures, Part II: low permeability class G oil well cement. Cem Concr Res 36(3):428-433
32. Le Saout G, Füllmann T, Kocaba V, Scrivener K (2007) Quantitative study of cementitious materials by X-ray diffraction/Rietveld analysis using an external standard. Paper presented at the 12th international congress on the chemistry of cement, Montréal, Canada
33. Lothenbach B, Winnefeld F, Alder C, Wieland E, Lunk P (2007) Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes. Cem Concr Res 37(4):483-491
34. Lothenbach B, Le Saout G, Gallucci E, Scrivener K (2008) Influence of limestone on the hydration of Portland cements. Cem Concr Res 38(6):848-860
35. Lukas W (1976) The influence of an Austrian fly ash on the reaction processes in the clinker phases of Portland cements. Mater Struct 9(5):331-337
36. Luke K, Glasser FP (1988) Internal chemical evolution of the constitution of blended cements. Cem Concr Res 18(4):495-502
37. Maltais Y, Marchand J (1997) Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars. Cem Concr Res 27(7):1009-1020
38. Matschei T, Glasser FP (2010) Temperature dependence, 0 to 40°C, of the mineralogy of Portland cement paste in the presence of calcium carbonate. Cem Concr Res 40(5):763-777
39. Ogawa K, Uchikawa H, Takemoto K, Yasui I (1980) The mechanism of the hydration in the system C3S-pozzolana. Cem Concr Res 10(5):683-696
40. Payá J, Monzó J, Borrachero MV, Peris-Mora E, Amahjour F (2000) Mechanical treatment of fly ashes: Part IV. Strength development of ground fly ash-cement mortars cured at different temperatures. Cem Concr Res 30(4): 543-551
41. Sakai E, Miyahara S, Ohsawa S, Lee S-H, DaimonM(2005) Hydration of fly ash cement. Cem Concr Res 35(6): 1135-1140
42. Scrivener KL (2004) Backscattered electron imaging of cementitious microstructures: understanding and quantification. Cem Concr Compos 26(8):935-945
43. Scrivener KL, Taylor HFW (1993) Delayed ettringite formation: a microstructural and microanalytical study. Adv Cem Res 5(20):139-146
44. Taylor HFW, Mohan K, Moir GK (1985) Analytical study of pure and extended Portland cement pastes: II, fly ash-and slag-cement pastes. J Am Ceram Soc 68(12):685-690
45. Zhang X (2007) Quantitative microstructural characterisation of concrete cured under realistic temperature conditions. Dissertation, EPFL, Lausanne