Mechanisms of reduced implant stability in osteoporotic bone

Biomechanics and Modeling in Mechanobiology

Volumn 11, Issue 3-4, 2012, Pages 313-323

  Ruffoni, D ^a   Muller R ^a   Van Lenthe, G H ^a,b  

^a ETH ZURICH   (Switzerland)

^b UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Finite element method; Implant anchorage; Osteoporosis; Peri implant bone architecture; Pull out test

Indexed keywords

ARCHITECTURE; DEFORMATION; FINITE ELEMENT METHOD; MICROSTRUCTURAL EVOLUTION; STIFFNESS;

BONE ARCHITECTURE; BONE-IMPLANT-SYSTEM; IMPLANT ANCHORAGE; IMPLANT STABILITY; OSTEOPOROSIS; PERI-IMPLANT BONE ARCHITECTURE; PERI-IMPLANT BONES; PULL-OUT; PULL-OUT TEST; THINNINGS;

BONE;

ARTICLE; BIOMECHANICS; BONE; BONE SCREW; COMPUTER SIMULATION; ELASTICITY; FINITE ELEMENT ANALYSIS; HUMAN; MECHANICAL STRESS; METHODOLOGY; ORTHOPEDICS; OSTEOPOROSIS; PHYSIOLOGY; PROSTHESIS; STATISTICAL MODEL;

BIOMECHANICS; BONE AND BONES; BONE SCREWS; COMPUTER SIMULATION; ELASTICITY; FINITE ELEMENT ANALYSIS; HUMANS; MODELS, STATISTICAL; ORTHOPEDICS; OSTEOPOROSIS; PROSTHESIS DESIGN; STRESS, MECHANICAL;

EID: 84861093117     PISSN: 16177959     EISSN: 16177940     Source Type: Journal    
DOI: 10.1007/s10237-011-0312-4     Document Type: Article

References (53)

1. An Y, Draughn R (2000) Mechanical testing of bone and the boneimplant interface. CRC Press, Boca Raton
2. Andrews E, Gibson L (2001) The influence of cracks, notches and holes on the tensile strength of cellular solids. Acta Mater 49(15): 2975-2979 (Pubitemid 32716051)
3. Ballarre J, Manjubala I, Schreiner WH, Orellano JC, Fratzl P, Ceré S (2010) Improving the osteointegration and boneimplant interface by incorporation of bioactive particles in solgel coatings of stainless steel implants. Acta Biomater 6:1601-1609
4. Bernhardt R, van denDolder J, Bierbaum S, Beutner R, ScharnweberD, Jansen J, Beckmann F, Worch H (2005) Osteoconductive modifications of ti-implants in a goat defect model: characterization of bone growth with sr μct and histology. Biomaterials 26(16): 3009-3019 (Pubitemid 39647236)
5. Chapman JR, Harrington R, Lee K, Anderson P, Tencer A, Kowalski D (1996) Factors affecting the pullout strength of cancellous bone screws. J Biomech Eng 118(3):391-398 (Pubitemid 26292899)
6. Chen H, Zhou X, Shoumura S, Emura S, Bunai Y (2010) Age- and gender-dependent changes in three-dimensional microstructure of cortical and trabecular bone at the human femoral neck. Osteoporos Int 21:227-236
7. Cummings S, Black D, Rubin S (1989) Lifetime risks of hip, colles, or vertebral fracture and coronary heart-disease among white postmenopausal women. Arch Intern Med 149(11):2445-2448 (Pubitemid 19283200)
8. Erdogan O, Shafer D, Taxel P, FreilichM (2007) Areviewof the association between osteoporosis and alveolar ridge augmentation. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 104(6):738-746
9. Gabet Y, Müller R, Levy J, Dimarchi R, Chorev M, Bab I, Kohavi D (2006) Parathyroid hormone 1-34 enhances titanium implant anchorage in low-density trabecular bone: a correlative micro-computed tomographic and biomechanical analysis. Bone 39(2):276-282 (Pubitemid 43851377)
10. Gabet Y, Kohavi D, Voide R, Mueller T, Müller R, Bab I (2010) Endosseous implant anchorage is critically dependent on mechanostructural determinants of peri-implant bone trabeculae. J Bone Miner Res 25(3):575-583
11. Gibson L (2005) Biomechanics of cellular solids. J Biomech 38(3): 377-399 (Pubitemid 40126449)
12. Gibson L, Ashby M (1997) Cellular solids: structure and properties. Cambridge University Press, Cambridge
13. Goldhahn J, Neuhoff D, Schaeren S, Steiner B, Linke B, Aebi M, Schneider E (2006) Osseointegration of hollow cylinder based spinal implants in normal and osteoporotic vertebrae: a sheep study. Arch Orthop Trauma Surg 126(8):554-561 (Pubitemid 44473282)
14. Grewal A, Sabbaghian M (1997) Load distribution between threads in threaded connections. J Pressure Vessel Technol 119(1):91-95 (Pubitemid 127680527)
15. Guo X, Kim C (2002) Mechanical consequence of trabecular bone loss and its treatment: a three-dimensional model simulation. Bone 30(2):404-411 (Pubitemid 34150164)
16. Helgason B, Viceconti M, Runarsson TP, Brynjolfsson S (2008) On the mechanical stability of porous coated press fit titanium implants: a finite element study of a pushout test. J Biomech 41(8):1675-1681
17. Huang H, Hsu J, Fuh L, Tu M, Ko C, Shen Y (2008) Bone stress and interfacial sliding analysis of implant designs on an immediately loaded maxillary implant: a non-linear finite element study. J Dent 36(6):409-417
18. Jensen K, Mosekilde L, Mosekilde L (1990) A model of vertebral trabecular bone architecture and its mechanical-properties. Bone 11(6):417-423
19. Ko CC, Kohn D, Hollister S (1996) Effective anisotropic elastic constants of bimaterial interphases: comparison between experimental and analytical techniques. J Mater Sci 7:109-117 (Pubitemid 26260982)
20. Liu X, Bevill G, Keaveny T, Sajda P, Guo X (2009a) Micromechanical analyses of vertebral trabecular bone based on individual trabeculae segmentation of plates and rods. J Biomech 42(3):249-256
21. Liu X, Zhang X, Guo X (2009b) Contributions of trabecular rods of various orientations in determining the elastic properties of human vertebral trabecular bone. Bone 45(2):158-163
22. Luxner M, Stampfl J, Pettermann H (2007) Numerical simulations of 3d open cell structures-influence of structural irregularities on elasto-plasticity and deformation localization. Int J Solids Struct 44(9):2990-3003 (Pubitemid 46386010)
23. Luxner M, Woesz A, Stampfl J, Fratzl P, Pettermann H (2009) A finite element study on the effects of disorder in cellular structures. Acta Biomater 5(1):381-390
24. Matsunaga S, Shirakura Y, Ohashi T, Nakahara K, Tamatsu Y, Takano N, Ide Y (2010) Biomechanical role of peri-implant cancellous bone architecture. Int J Prosthodont 23:333-338
25. Mellal A, Wiskott H, Botsis J, Scherrer S, Belser U (2004) Stimulating effect of implant loading on surrounding bone-comparison of three numerical models and validation by in vivo data. Clin Oral Implant Res 15(2):239-248 (Pubitemid 40109810)
26. Mori H, Manabe M, Kurachi Y, Nagumo M (1997) Osseointegration of dental implants in rabbit bone with low mineral density. J Oral Maxil Surg 55(4):351-361
27. Natali A, Pavan P, Ruggero A (2006) Analysis of bone-implant interaction phenomena by using a numerical approach. Clin Oral Implant Res 17(1):67-74 (Pubitemid 43424600)
28. Natali A, Carniel E, Pavan P (2008) Investigation of bone inelastic response in interaction phenomena with dental implants. Dent Mater 24(4):561-569
29. Nazarian A, Müller R (2004) Time-lapsed microstructural imaging of bone failure behavior. J Biomech 37(1):55-65 (Pubitemid 37532629)
30. Nazarian A, StauberM, Zurakowski D, Snyder B, Müller R (2006) The interaction of microstructure and volume fraction in predicting failure in cancellous bone. Bone 39(6):1196-1202 (Pubitemid 44827930)
31. Peter B, GauthierO, Laib S, Bujoli B, Guicheux J, Janvier P, van Lenthe G, Müller R, Zambelli P, Bouler J, Pioletti D (2006) Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats. J Biomed Mater Res A 76(1):133-143 (Pubitemid 43075691)
32. Puleo D, Nanci A (1999) Understanding and controlling the boneimplant interface. Biomaterials 20(23-24):2311-2321
33. Ramamurti B, Orr T, Bragdon C, Lowenstein J, Jasty M, Harris W (1997) Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment. J Biomed Mater Res 36(2):274-280 (Pubitemid 27330051)
34. Ruffoni D, Dunlop J, Fratzl P, Weinkamer R (2010) Effect of minimal defects in periodic cellular solids. Philos Mag 90:1807-1818
35. Silva M, Gibson L (1997) The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids. Int J Mech Sci 39(5):549-563 (Pubitemid 127426965)
36. Simank H, Stuber M, Frahm R, Helbig L, van Lenthe H, Müller R (2006) The influence of surface coatings of dicalcium phosphate (dcpd) and growth and differentiation factor-5 (gdf-5) on the stability of titanium implants in vivo. Biomaterials 27(21):3988-3994
37. Søballe K, Hansen E, Brockstedt-Rasmussen H, Hjortdal V, Juhl G, Pedersen C, Hvid I, Bunger C (1991) Fixation of titanium and hydroxyapatite-coated implants in arthritic osteopenic bone. J Arthroplasty 6:307-316
38. Søballe K, Hansen E, Rasmussen H, Jorgensen P, Bunger C (1992) Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. J Orthop Res 10(2):285-299
39. Stadlinger B, Pilling E, Huhle M, Mai R, Bierbaum S, Bernhardt R, ScharnweberD, Kuhlisch E, Hempel U, EckeltU (2007) Influence of extracellular matrix coatings on implant stability and osseointegration: an animal study. J Biomed Mater Res B 83(1):222-231 (Pubitemid 47463217)
40. StadlingerB, PillingE, Mai R, Bierbaum S, Berhardt R, ScharnweberD, Eckelt U (2008) Effect of biological implant surface coatings on bone formation, applying collagen, proteoglycans, glycosaminoglycans and growth factors. J Mater Sci 19(3):1043-1049 (Pubitemid 351337470)
41. Stauber M, Müller R (2006) Age-related changes in trabecular bone microstructures: global and local morphometry. Osteoporos Int 17(4):616-626
42. StauberM, Rapillard L, vanLentheG, Zysset P, Müller R (2006) Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness. J Bone Miner Res 21(4):586-595
43. Szmukler-Moncler S, Salama H, Reingewirtz Y, Dubruille J (1998) Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature. J Biomed Mater Res 43(2):192-203 (Pubitemid 28246972)
44. Tsubota K, Adachi T, Tomita Y (2003) Effects of a fixation screw on trabecular structural changes in a vertebral body predicted by remodeling simulation. Ann Biomed Eng 31:733-740
45. Vajjhala S, Kraynik A, Gibson L (2000) Acellular solid model for modulus reduction due to resorption of trabeculae in bone. J Biomech Eng 122(5):511-515
46. van Lenthe G, Stauber M, Müller R (2006) Specimen-specific beam models for fast and accurate prediction of human trabecular bone mechanical properties. Bone 39(6):1182-1189 (Pubitemid 44827929)
47. Verhulp E, van Rietbergen B, Müller R, Huiskes R (2008) Indirect determination of trabecular bone effective tissue failure properties using micro-finite element simulations. J Biomech 41(7):1479-1485
48. Wermelin K, Suska F, Tengvall P, Thomsen P, Aspenberg P (2008) Stainless steel screws coated with bisphosphonates gave stronger fixation and more surrounding bone. Histomorphometry in rats. Bone 42(2):365-371
49. Wirth A, Mueller T, Vereecken W, Flaig C, Arbenz P, Müller R, van Lenthe G (2010a) Mechanical competence of bone-implant systems can accurately be determined by image-basedmicro-finite element analyses. Arch Appl Mech 80:513-525
50. Wirth A, Müller R, van Lenthe G (2010b) Computational analysis of small endosseous implants in osteoporotic bone. Eur Cells Mater 20:58-71
51. Yeh O, Keaveny T (1999) Biomechanical effects of intraspecimen variations in trabecular architecture: a three-dimensional finite element study. Bone 25(2):223-228 (Pubitemid 29317626)
52. Zhang Q, Tan S, Chou S (2004) Investigation of fixation screw pull-out strength on human spine. J Biomech 37(4):479-485 (Pubitemid 38292986)
53. Zhang Q, Tan S, Chou S (2006) Effects of bone materials on the screw pull-out strength in human spine. Med Eng Phys 28(8):795-801 (Pubitemid 43867388)