Condition monitoring of wind turbines: Techniques and methods

Renewable Energy

Volumn 46, Issue , 2012, Pages 169-178

  García Márquez, Fausto Pedro ^a   Tobias, Andrew Mark ^b   Pinar Pérez, Jesús María ^a   Papaelias, Mayorkinos ^b  

^a UNIVERSITY OF CASTILLA LA MANCHA   (Spain)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Condition monitoring; Fault detection and diagnosis; Maintenance management; Wind turbines

Indexed keywords

CM TECHNIQUES; FAULT DETECTION AND DIAGNOSIS; FAULT DIAGNOSTICS; MAINTENANCE MANAGEMENT; MAINTENANCE STRATEGIES; POWER PRODUCTION; RESEARCH OPPORTUNITIES;

FAULT DETECTION; FAULT TREE ANALYSIS; MAINTENANCE; WIND TURBINES;

CONDITION MONITORING;

FUTURE PROSPECT; LITERATURE REVIEW; POWER GENERATION; WIND TURBINE;

EID: 84860886816     PISSN: 09601481     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.renene.2012.03.003     Document Type: Article

References (151)

1. World wind energy report 2009 2009, WWEA. http://www.wwindea.org.
2. McGowan J.G., Connors S.R. Windpower: a turn of the century review. Annual Review of Energy and the Environment 2000, 25:147-197.
3. Milborrow D. Operation and maintenance costs compared and revealed. Wind Stats 2006, 19(3):3.
4. Vachon W. Long-term O&M costs of wind turbines based on failure rates and repair costs. Proceedings WINDPOWER, American wind energy Association Annual conference 2002, 2-5. Oregon, Portland, June.
5. Walford C. Wind turbine reliability: understanding and minimizing wind turbine operation and maintenance costs 2006, Sandia report, SAND2006-1100, Sandia National Laboratories, Albuquerque, New Mexico 87185 and Livermore, California 94550.
6. Tavner P.J., Spinato F., van Bussel G.J.W., Koutoulakos E. Reliability of different wind turbine concepts with relevance to offshore application April 2008, European Wind Energy Conference, Brussels.
7. Anon Managing the wind: reducing Kilowatt-Hour costs with condition monitoring. Refocus 2005, 6(3):48-51.
8. Yang W.X., Tavner P.J., Crabtree C.J., Wilkinson M. Cost effective condition monitoring for wind turbines. IEE Transactions on Industrial Electronics 2010, 57(1).
9. Wind Power in the United States: Technology, Economic, and Policy Issues (02-09-09). http://www.fas.org/sgp/crs/misc/RL34546.pdf.
10. de Novaes Pires G, Alencar E, Kraj A. Remote conditioning monitoring system for a hybrid wind diesel system-application at Fernando de Naronha Island, Brasil. (19-07-10). http://www.ontario-sea.org.
11. Igarashi T., Hamada H. Studies on the vibration and sound of defective roller bearings. JSME June 1982, 25(204):994-1001. (First report: vibration of ball bearing with one defect), Bull.
12. Igarashi T., Yabe S. Studies on the vibration and sound of defective roller bearings. JSME 1983, 26(220):1791-1798. (First report: sound of ball bearing with one defect), Bull.
13. Knezevic J. Reliability, maintainability and supportability engineering: a probabilistic approach 1993, McGraw Hill.
14. Ben-Daya M.S., Duffuaa A.R. Handbook of maintenance management and engineering 2009, Springer Verlag London Limited.
15. Pedregal D.J., Garcia Marquez F.P., Roberts C. An algorithmic approach for maintenance management. Annals of Operations Research 2009, 166:109-124.
16. Campbell J.D., Jardine A.K.S. Maintenance excellence: optimizing equipment life-cycle decisions 2001, Marcel Dekker, New York.
17. Garcia Marquez F.P. An approach to remote condition monitoring systems management. The IET International Conference on Railway Condition Monitoring 2006, 156-160.
18. Garcia Marquez F.P., Pedregal D.J., Roberts C. Time series methods applied to failure prediction and detection. Reliability Engineering & System Safety 2010, 95(6):698-703.
19. Garcia Marquez F.P., Roberts C., Tobias A. Railway point mechanisms: condition monitoring and fault detection. Proceedings of the Institution of mechanical Engineers, Part F, Journal of Rail and Rapid Transit 2010, vol. 224(1):35-44. Professional Engineering Publishing.
20. Byon E., Ding Y. Season-dependent condition-based maintenance for a wind turbine using a partially observed markov decision process. IEEE Transactions on Power Systems 2010, 25(4):1823-1834.
21. McMillan D., Ault G.W. Condition monitoring benefit for onshore wind turbines: sensitivity to operational parameters. IET Renewable Power Generation 2008, 2(1):60-72.
22. Moubray J. Reliability-centered maintenance 1997, Industrial Press, New York.
23. Smith A.M. Reliability-centred maintenance 1993, McGraw-Hill, Inc, New York.
24. Garcia Marquez FP, Pedregal DJ. Applied RCM2 algorithms based on statistical methods. International Journal of Automation and Computing; 4:109-116.
25. Deshpande V.S., Modak J.P. Application of RCM for safety considerations in a steel plant. Reliability Engineering and System Safety 2002, 3(78):325-334.
26. Garcia Marquez F.P., Schmid F., Collado J.C. A reliability centered approach to remote condition monitoring. A railway points case study. Reliability Engineering & System Safety 2003, 80(1):33-40.
27. Garcia Marquez F.P., Schmid F., Collado J.C. Wear assessment employing remote condition monitoring: a case study. Wear 2003, 2(255):1209-1220.
28. Deshpande V.S., Modak J.P. Application of RCM to a medium scale industry. Reliability Engineering and System Safety 2002, 1(77):31-43.
29. Andrawus J.A., Watson J., Kishk M., Adam A. The selection of suitable maintenance strategy for wind turbines. Wind Engineering 2009, 30(6):471-486.
30. Wiggelinkhuizen E., Verbruggen T., Xiang J., Watson S.J., Giebel G., Norton E., et al. CONMOW: condition monitoring for offshore wind farms. Proceedings of the 2007 EWEA European Wind Energy Conference (EWEC2007), Milan, Italy 7-10 May 2007.
31. Scarf P.A. A framework for condition monitoring and condition based maintenance. Quality Technology &. Quantitative Management 2007, 4(2):301-312.
32. Cozens N.J., Watson S.J. State of the art condition monitoring techniques suitable for wind turbines and wind farm applications, report for CONMOW project 2003.
33. Watson S.J., Infield D.G., Xiang J. Condition monitoring of wind turbines - Measurements and methods. IET Renewable Power Generation 2008.
34. Nilsson J., Bertling L. Maintenance management of wind power systems using condition monitoring systems - Life Cycle costs analysis for two case Studies. IEE Transactions on Energy Conversion 2007, 22(1).
35. Hameed Z., Hong Y.S., Choa Y.M., Ahn S.H., Song C.K. Condition monitoring and fault detection of wind turbines and related algorithms: a review. Renewable and Sustainable Energy Reviews 2009, 13:1-39.
36. Verbruggen T.W. Wind turbine operation & maintenance based on condition monitoring, WT-O. Final report, ECN-C-03-047 April 2003.
37. Caselitz P., Giebhardt J. Fault prediction techniques for offshore wind farm maintenance and repair strategies. Proceedings of the EWEC2003 2003.
38. Caselitz P., Giebhardt J., Mevenkamp M. On-line fault detection and prediction in wind energy converters. Proceedings of EWEC'94, Thessaloniki, Greece 1994, 623-627.
39. Futter D.N. Vibration monitoring of industrial gearboxes using time domain averaging. IMechE 2nd International conference on gearbox noise, vibration and diagnostics 1995, Mechanical Engineering Publications.
40. Lin S.T., McFadden P.D. Vibration analysis of gearboxes by the linear wavelet transform. IMechE 2nd International conference on gearbox noise, vibration and diagnostics 1995, Mechanical Engineering Publications.
41. McFadden P.D. Examination of a technique for the early detection of failure in gears by signal processing of the time domain average of the meshing vibration. Mechanical Systems and Signal Processing 1987, 1(2):173-183.
42. McFadden P.D. Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration, Journal of vibration, acoustics. Stress and Reliability in Design 1996, 108:165-170.
43. Miller AJ, 1999. A New wavelet basis for the decomposition of gear motion error signals and its application to gearbox diagnostics, Master of Science Thesis, The Pennsylvania State University.
44. Dyer D., Stewart R.M. Detection of rolling element bearing damage by statistical vibration analysis. ASME Journal of Mechanical Design 1978, 100:229-235.
45. Sun Q., Tang Y. Singularity analysis using continuous wavelet transform for bearing fault diagnosis. Mechanical Systems and Signal Processing 2002, 16(6):1025-1041.
46. Tse P.W., Peng Y.H., Yam R. Wavelet analysis and envelope detection for rolling element bearing fault diagnosis-their effectiveness and Flexibilities. ASME Journal of Vibration and Acoustics 2001, 123:303-310.
47. Tandon N., Nakra B.C. Vibration and acoustic monitoring techniques for the detection of defects in rolling element bearings - a review. Shock and Vibration Digest 1992, 24(3):3-11.
48. Tandon N., Choudhury A. A review of the vibration and acoustic measurement methods for detection of defects in rolling element bearings. Tribology International 1999, 32(8):469-480.
49. Yoshioka T. Detection of rolling contact subsurface fatigue cracks using acoustic emission technique. Lubrication Engineering 1992, 49(4):303-308.
50. Yoshioka T., Fuhjiwara T. Application of acoustic emission technique to detection of rolling element-bearing failure. Acoustic Emission Monitoring and Analysis in Manufacturing 1984, 55-75. ASME, New York. D.A. Dornfield (Ed.).
51. Yoshioka T., Takeda M. Classification of rolling contact fatigue initiation using acoustic emission technique. Lubrication Engineering 1994, 51(1):41-44.
52. Tandon N., Yadava G.S., Ramakrishna K.M. A comparison of some condition monitoring techniques for the detection of defect in induction motor ball bearings. Mechanical Systems and Signal Processing 2007, 21(1):244-256.
53. Tandon N., Nakra B.C. Defect detection in rolling element bearings by acoustic emission method. Journal of Acoustic Emission 1990, 9(1):25-28.
54. Tan C.C. Application of acoustic emission to the detection of bearing failures. Proceedings Tribology Conference, Brisbane 1990, 110-114.
55. Wei J., McCarty J. Acoustic emission evaluation of composite wind turbine blades during fatigue testing. Wind Engineering 1993, 17(No. 6):266-274.
56. Giebel G., Oliver G., Malcolm M., Kaj B. Common Access to wind turbines data for condition monitoring. Riso National Laboratory. Proceedings of the 27th Riso International Symposium on Material Science, Denmark 2006, 157-164.
57. Blanch M.J., Dutton A.G. Acoustic emission monitoring of field Tests of an operating wind turbine. Key Engineering Materials 2003, 245-246:475-482.
58. Jungert A. Damage detection in wind turbine blades using two different acoustic techniques. The e-Journal of Nondestructive Testing 2008, 25.
59. Anastassopoulos A.A., Kouroussis D.A., Nikolaidis V.N., Proust A., Dutton A.G., Blanch M.J., et al. Structural integrity evaluation of wind turbines blades using pattern recognition analysis on acoustic emission data. Journal of Acoustic Emission 2002, 20:229-237.
60. Joosse P.A., Blanch M.J., Dutton A.G., Kouroussis D.A., Philippidis T.P., Vionis P.S. Acoustic emission monitoring of small wind turbine blades. Journal of Solar energy Engineering 2002, 124(4):446-455.
61. Endrenyi J., McCauley J., Singh C. The present status of maintenance strategies and the impact of maintenance on reliability. IEEE Transaction Power System 2001, 16(4):638-646.
62. Castaings M., Cawley P. The generation, propagation and detection of Lamb waves in plates using air-coupled ultrasonic transducers. Journal of Acoustic Society of America 1996, 100(5):3070-3077.
63. Castaings M., Cawley P., Farlow R., Hayward G. Single Sided inspection of composite materials using air coupled ultrasound. Journal of Nondestructive Evaluation 1998, 17(1):37-45.
64. Raghavan A., Carlos E., Cesnik S. Review of guided-wave structural health monitoring. The Shock and Vibration Digest 2007, 39:91-114.
65. Tsai C.S., Hsieh C.T., Huang S.J. Enhancement of damage detection of wind turbines. IEEE Transactions on Energy Conversion 2006, 21(3):776-781.
66. Juengert A., Grosse C.U. Inspection techniques for wind turbine bladesusing ultrasound and sound waves. Proceedings of non-destructive testing in Civil Engineering, Nantes, France, 2009 2009.
67. RaiŠutis R., Jasiūnienė E., Žukauskas E. Ultrasonic NDT of wind turbines blades using guided waves. Ultrasound 2008, vol. 63. Technologija, Kaunas, 7-11.
68. Jasiūnienė E., RaiŠutis R., Šliteris R., VoleiŠis A., Jakas M. Ultrasonic NDT of wind turbine blades using contact pulse-echo immersion testing with moving water container. Ultragarsas (Ultrasound) 2008, 63(3):28-32.
69. Jasiuniene E., Raisutis R., Sliteris R., Voleisis A., Vladisauskas A., Mitchard D., et al. NDT of wind turbine blades using adapted ultrasonic and radiographic techniques. Insight- Non-Destructive Testing and Condition Monitoring 2009, 51(9):477-483.
70. RaiŠutis R., Jasiūnienė E., Šliteris R., VladiŠauskas A. The review of non-destructive testing techniques suitable for inspection of the wind turbines blades. Ultragarsas (Ultrasound) 2008, 63(1):26-30.
71. Yin Y.H., Wang W.H., Yan X.P., Xiao H.L., Wang C.T. An integrated online oil analysis method for condition monitoring. Measurement Science and Technology 2003, 14(11):1973-1977.
72. Leske S., Kitaljevich D. Managing gearbox failure, Dewek 2006, Dewi Magazine, N. 29.
73. Barron T. Engineering condition monitoring 1996, Addison Wesley Longman.
74. Toms L.A. Machinery oil analysis: methods, automation and benefits. Coastal 1998.
75. Morfiadakis E., Papadopoulos K., Philippidis T.P. Assessment of the strain gauge technique for measurement of wind turbine blade loads. Wind Energy 2000, 3(1):35-65.
76. Schroeder K., Ecke W., Apitz J., Lembke E., Lenschow G. A fibre Bragg grating sensor system monitors operational load in a wind turbine rotor blade. Measurement Science and Technology 2006, 17(5):1167-1172.
77. Wernicke J., Shadden J., Kuhnt S., Byars R., Rhead P., Damaschke Field experience of fibre optical strain sensors for providing real time load information from wind turbine blades during operation. Paper presented at the European wind energy conference, 22-25 November, London, UK 2004.
78. Schoen R.R., Lin B.K., Habetler T.G., Schlag J.H., Farag S. An unsupervised, on-line system for induction motor fault detection using stator current monitoring. IEEE Transactions on Industry Applications 1995, 31(6):1280-1286.
79. Seo D.C., Lee J.J. Damage detection of CFRP laminates using electrical resistance measurement and neural network. Composite Structures 1999, 47:525-530.
80. Todoroki A., Tanaka Y. Delamination identification of cross-ply graphite-epoxy composite beams using electric resistance change method. Composites Science and Technology 2002, 62:629-639.
81. Matsuzaki R., Todoroki A. Wireless detection of internal delamination cracks in CFRP laminates using oscillating frequency changes. Composites Science and Technology 2006, 66:407-416.
82. Butler D.E. The shock pulse method for the detection of damaged rolling bearings. NDT International 1973, 6(2):92-95.
83. Zhen L., Zhengjia H., Yanyang Z., Xuefeng C. Bearing condition monitoring based on shock pulse method and improved redundant lifting scheme. Mathematics and Compuers in Simulation 2008, 79(3):318-338.
84. Tandon N., Nakra B.C. Comparison of vibration and acoustic measurement techniques for the condition monitoring of rolling element bearings. Tribology International 1992, 25(3):205-212.
85. Morando I.E. Measuring shock pulses is Ideal for bearing condition monitoring. Pulp and Paper 1988, 62(12):96-98.
86. Müller H., Pöller M., Basteck A., Tilscher M., Pfister J. Grid compatibility of variable speed wind turbines with directly coupled synchronous generator and hydro-dynamically controlled gearbox. Sixth International Workshop on Large-Scale integration of wind power and transmission networks for offshore wind farms, Delft, NL 2006, 307-315.
87. Zaher A.S., McArthur S.D.J. A multi-agent fault detection system for wind turbines defect recognition and diagnosis. Proceedings IEEE Lausanne POWERTECH 2007 2007, 22-27.
88. Sorensen B.F., Lading L., Sendrup P., McGugan M., Debel C.P., Kristensen O.J.D., et al. Fundamentals for remote structural health monitoring of wind turbines blades - A Preproject. Riso-R-1336(EN) 2002.
89. Dale S.L., Dolan, Lehn P.W. Real-time wind turbine emulator suitable for power quality and dynamic control Studies. Proceedings of international conference on power systems transients, Montreal, Canada 2005, 1-6.
90. Peters S.T. Handbook of composites 1998, Chapman & Hall, London, 839-855.
91. Fantidis J.G., Potolias C., Bandekas D.V. Wind turbine blade nondestructive testing with a transportable Radiography system. Science and Technology of Nuclear Installations 2011, ID 347320.
92. Smith B.M. Condition monitoring by thermography. NDT International 1978, 11(3):121-122.
93. Rumsey M.A., Musial W. Application of infrared thermography nondestructive testing during wind turbine blade Tests. Journal of Solar Energy Engineering 2001, 123(4):271.
94. Smith G.M., Clayton B.R., Dutton A.G., Irving A.D. Infra-red thermography for condition monitoring of composite wind turbine blades feasibility studies using cyclic loading tests. 15th British Wind Energy Association Conference (BWEA15), York, UK 1993.
95. Beattie A.G., Rumsey M. Non-destructive evaluation of wind turbine blades using an Infrared camera. ASME wind energy Symposium, 18th, Aerospace Sciences Meeting and Exhibit, 37th, Reno, NV 1999.
96. Doliński L., Krawczuk M. Damage detection in turbine wind blades by vibration based methods. 7th International conference on Modern practice in stress and vibration analysis 2009, Journal of Physics: Conference series 181 012086.
97. Levitin G. Genetic algorithms in reliability engineering. Reliability Engineering and System Safety 2006, 91(9):975-976.
98. Thiringer T. Power quality measurements performed on a low-voltage grid equipped with two wind turbines. IEEE Transactions on Energy Conversion 1996, 11:601-606.
99. Tana C.K., Irvinga P., Mba D. A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears. Mechanical Systems and Signal Processing 2007, 21:208-233.
100. Garcia Marquez F.P., Pedregal D.J. Failure analysis and diagnostics for railway trackside equipment. Engineering Failure Analysis 2007, 14(8):1411-1426.
101. Garcia Marquez F.P., Pedregal D.J., Schmid F. Unobserved component models applied to the assessment of wear in railway points: a case study. European Journal of Operational Research 2007, 176:1702-1703.
102. Llombart-Estopiña A. Improving the operation and maintenance of wind farms: determination of wind turbines performance. Proceedings of ICREPQ 2008.
103. Giebhardt J. Condition monitoring for wind turbines 2007, State of the Art Report As Deliverable 7.1.1, WP7 Condition monitoring. UPWIND.
104. Cheng J., Yang Y., Yu D. The envelope order spectrum based on generalized demodulation time-frequency analysis and its application to gear fault diagnosis. Mechanical Systems and Signal Processing 2010, 24:508-521.
105. Li C.J., Li S.Y. Acoustic emission analysis for bearing condition monitoring. Wear 1995, 185:64-74.
106. Wismer N.J. Gearbox analysis using cepstrum analysis and comb liftering 1994, Application Note Brüel & Kjaer, Denmark.
107. Caselitz P., Giebhardt J., Mevenkamp M., Reichardt M. Application of condition monitoring systems in wind energy converters. Proceedings of EWEC'97, Dublin 1997, 579-582.
108. Zheng G.T., Wang W.J. A new cepstral analysis procedure of recovering excitations for transient components of vibration signals and applications to rotating machinery condition monitoring. ASME Journal of Vibration and Acoustics 2001, 123:222-229.
109. Combet L., Gelman L. An automated methodology for performing time synchronous averaging of a gearbox signal without speed sensor. Mechanical Systems and Signal Processing 2007, 21(6):2590-2606.
110. Bechhoefer E., Kingsley M. A review of time synchronous average algorithms. Annual conference of the prognostics and Health management Society, San Diego, CA 2009.
111. Burrus C.S., McClellan J.H., Oppenheim A.V., Parks T.W., Schafer R.W., Schuessler H.W. Computer-based exercises for signal processing using MATLAB 1994, Prentice-Hall, Englewood Cliffs, NJ, 43-59.
112. Jardine A.K.S., Lin D., Banjevic D. A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing 2006, 20(7):1483-1510.
113. Caselitz P., Giebhardt J. Rotor condition monitoring for improved operational safety of offshore wind energy converters. Transactions of the ASME. Journal of Solar Energy Engineering 2005, 127(2):253-261.
114. Yang W.X., Tavner P.J., Wilkinson M. Condition monitoring and fault diagnosis of a WT with a synchronous generator using wavelet transforms. The 4th International conference on power electronics, machines and Drives 2008 (PEMD2008), York, UK 2008, 6-10.
115. Abbate A., DeCusatis C.M., Das P. Wavelets and Subbands: fundamentals and applications 2002, Birkhauser, Boston, 101-503.
116. Newland D.E. An introduction to random vibrations, spectral and wavelet analysis 1993, Longman, New York.
117. Strang G., Nguyen T. Wavelets and filter banks 1997, Wellesley-Cambridge Press.
118. Staszewski W.J., Tomlinson G.R. Application of the wavelet transform to fault detection in a Spur gear. Mechanical Systems and Signal Processing 1994, 8:289-307.
119. Wang W.J., McFadden P.D. Application of wavelets to gearbox vibration signals for fault detection. Journal of Sound and Vibration 1996, 192:927-939.
120. Luo G.Y., Osypiw D., Irle M. On-Line vibration analysis with fast continuous wavelet algorithm for condition monitoring of bearing. Journal of Vibration and Control 2003, 9:931-947.
121. Rubini R., Meneghetti U. Application of the envelope and wavelet transform analyses for the diagnosis of incipient faults in ball bearings. Mechanical Systems and Signal Processing 2001, 15:287-302.
122. Aretakis N., Mathioudakis K. Wavelet analysis for Gas turbine fault diagnostics. Journal of Engineering for Gas Turbines and Power 1997, 119:870-876.
123. Peng Z.K., Chu F.L., Peter, Tse W. Singularity analysis of the vibration signals by means of wavelet Modulus Maximal method. Mechanical Systems and Signal Processing 2007, Vol. 21(2):780-794.
124. Dalpiaz G., Rivola A. Condition monitoring and diagnostics in automatic machines: comparison of vibration analysis techniques. Mechanical Systems and Signal Processing 1997, 11:53-73.
125. Baydar N., Ball A. Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing 2003, 17:787-804.
126. Miaoa Q., Makis V. Condition monitoring and classification of rotating machinery using wavelets and Hidden Markov models. Mechanical Systems and Signal Processing 2007, 21:840-855.
127. Xiang J., Watson S.J. Practical condition monitoring techniques for offshore wind turbines. EWEC 2008 conference proceedings, Brussels, Belgium, PO 2008, vol. 195:1-8.
128. Kwon K.C., Kim J.H. Accident identification in nuclear power plants using Hidden Markov models. Engineering Applications of Artificial Intelligence 1999, 12:491-501.
129. Atlas L., Ostendorf M., Bernard G.D. Hidden Markov models for monitoring machining tool-Wear. IEEE. ICASSP 2000, 6:3887-3890.
130. Ocak H., Loparo K.A. A New bearing fault detection and diagnosis Scheme based on Hidden Markov modeling of vibration signals. IEEE ICASSP 2001, 5:3141-3144.
131. Yam R.C.M., Tse P.W., Li L., Tu P. Intelligent predictive decision support system for condition-based maintenance. The International Journal of Advanced Manufacturing Technology 2001, 17(5):383-391.
132. Garcia M.C., Sanz-Bobi M.A., del Pico J. SIMAP: intelligent system for predictive maintenance application to the health condition monitoring of a windturbine gearbox. Computers in Industry 2006, 57(6):552-568.
133. Andrews J.D., Moss T.R. Reliability and risk assessment 1993, Longmans.
134. Ghoshal A., Sundaresan M.J., Schulz M.J., Pai P.F. Structural health monitoring techniques for wind turbines blades. Journal of Wind Engineering and Industrial Aerodynamics 2000, 85:309-324.
135. Hong J.-C., Kim Y.Y., Lee H.C., Lee Y.W. Damage detection using the Lipschitz exponent estimated by the wavelet transform: application to vibration modes of a Beam. International Journal of Solids and Structures 2002, Vol. 39:1803-1816.
136. Robinson J.C., Canada R.G., Piety K.R. Vibration monitoring on slow speed machinery: new methodologies covering machinery from 0.5 to 600 RPM. Proceedings of the Fifth International Conference on Profitable Condition Monitoring Fluids and Machinery Performance Monitoring 1996, 169-181. Mechanical Engineering Publications Limited, UK.
137. Becker E., Poste P. Keeping the blades turning: condition monitoring of wind turbine gears. Refocus 2006, 7(2):26-32.
138. Sun Q., Tang Y., Yang W., Ji Y. Feature extraction with discrete wavelet transform for drill wear monitoring. Journal of Vibration and Control 2005, 11:1375-1396.
139. Nikolaou N.G., Antoniadis I.A. Rolling element bearing fault diagnosis using wavelet packets. NDT & E International 2002, 35(3):197-205.
140. Gieske J.H., Rumsey M.A. Nondestructive evaluation (NDE) of composite/metal bond interface of a wind turbines blade using an acousto-ultrasonic technique. ASME Wind Energy Symposium 1997, 249-254. AIAA/ASME. W. Musial, D.E. Berg (Eds.).
141. Beattie A.G. Acoustic emission monitoring of a wind turbines blade during a fatigue test. ASME Wind Energy Symposium 1997, 239-248. AIAA/ASME. W. Musial, D.E. Berg (Eds.).
142. Dutton A.G., Blanch M.J., Vionis P., Lekou D., van Delft D.R.V., Joosse P.A., et al. Acoustic emission condition monitoring of wing turbine rotor blades: laboratory certification testing to large scale in-service deployment. Proceedings of the 2001 European wind energy conference, Copenhagen, Denmark 2001.
143. Menon S., Schoess J.N., Hamza R., Busch D. Wavelet-Based acoustic emission detection method with adaptive thresholding. Proceedings of the SPIE 3986 2000, 71-77.
144. Heng R.B., Mohd M.J. Condition monitoring using acoustic signals. Proceedings of the Fifth International Conference on Profitable Condition Monitoring Fluids and Machinery Performance Monitoring 1996, 145-158. Mechanical Engineering Publications Limited, UK.
145. Kim J.S., Kang M.C., Yyu B.J., Ji Y.K. Development of an online tool-life monitoring system using acoustic emission signals in gear shaping. International Journal of Machine Tools and Manufacture 1999, 39(11):1761-1777.
146. Prabhakaran A., Jagga C.R. Condition monitoring of Steam turbine-generator through contamination analysis of used lubricating oil. Tribology International 1999, 32:145-152.
147. Van Paepegem W., Degrieck J. Simulating damage and permanent strain in composites under in-plane fatigue loading. Computers and Structures 2005, 83:1930-1942.
148. Mba D.U., Bannister R.H. Profitable condition monitoring of low speed rotating machinery using stress waves. Proceedings of the Fifth International Conference on Profitable Condition Monitoring Fluids and Machinery Performance Monitoring 1996, 159-168. Mechanical Engineering Publications Limited, UK.
149. Hatch C. Improved wind turbines condition monitoring using acceleration enveloping. Orbit 2004, 58-61.
150. Ness S., Sherlock C.N. Nondestructive Testing Handbook. Nondestructive Testing Overview 1996, vol. 10. American Society for Nondestructive Testing.
151. Drewry M.A., Georgiou G.A. A review of NDT techniques for wind turbines. Insight 2007, 49(3):137-141.