Poly(butylene/diethylene glycol succinate) multiblock copolyester as a candidate biomaterial for soft tissue engineering: Solid-state properties, degradability, and biocompatibility

Journal of Bioactive and Compatible Polymers

Volumn 27, Issue 3, 2012, Pages 244-264

  Gualandi, Chiara ^a   Soccio, Michelina ^a   Govoni, Marco ^b   Valente, Sabrina ^a   Lotti, Nadia ^a   Munari, Andrea ^a   Giordano, Emanuele ^b   Pasquinelli, Gianandrea ^a   Focarete, Maria Letizia ^a  

^a UNIVERSITY OF BOLOGNA   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

electrospinning; hydrolytic degradation; multiblock copolyester; reactive blending; soft tissue engineering

Indexed keywords

AUTOCATALYTIC EFFECTS; BIORESORBABLE; COPOLYESTERS; DEGRADABILITY; DIETHYLENE GLYCOL; ELASTOMERIC BEHAVIOR; ELECTROSPUNS; END-GROUPS; H9C2 CELLS; HYDROLYTIC DEGRADATION; MULTIBLOCKS; POLY (BUTYLENE SUCCINATE); POTENTIAL UTILITY; REACTIVE BLENDING; SOFT TISSUE ENGINEERING; SOLID-STATE PROPERTIES; SUCCINATE UNITS;

BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; BIOMIMETICS; BUTENES; DEGRADATION; ELECTROSPINNING; GLYCOLS;

SCAFFOLDS (BIOLOGY);

CARBOXYLIC ACID; COPOLYMER; POLYBUTYLENE DIETHYLENE GLYCOL SUCCINATE; TISSUE SCAFFOLD; UNCLASSIFIED DRUG;

ANIMAL CELL; ARTICLE; BIOCOMPATIBILITY; BIODEGRADABILITY; CONTROLLED STUDY; ELASTICITY; FILM; HYDROLYSIS; NONHUMAN; PHENOTYPE; RAT; SOLID STATE; TISSUE ENGINEERING;

EID: 84860792663     PISSN: 08839115     EISSN: 15308030     Source Type: Journal    
DOI: 10.1177/0883911512440536     Document Type: Article

References (49)

1. Rehfeldt F, Engler AJ, Eckhardt A, et al. Cell responses to the mechanochemical microenvironment-implications for regenerative medicine and drug delivery. Adv Drug Deliver Rev. 2007 ; 59: 1329-1339 (Pubitemid 350088256)
2. Jawad H, Ali NN, Lyon AR, et al. Myocardial tissue engineering: a review. J Tissue Eng Regen M. 2007 ; 1: 327-342
3. Amsden B. Curable, biodegradable elastomers: emerging biomaterials for drug delivery and tissue engineering. Soft Matter. 2007 ; 3: 1335-1348 (Pubitemid 47587191)
4. Black J, Hastings G Handbook of biomaterial properties. London: Chapman and Hall ; 1998 :
5. Serrano MC, Chung EJ, Ameer GA. Advances and applications of biodegradable elastomers in regenerative medicine. Adv Funct Mater. 2010 ; 20: 192-208
6. Guelcher SA. Biodegradable polyurethanes: synthesis and applications in regenerative medicine. Tissue Eng Pt B. 2008 ; 14: 3-17
7. Yin D, Wang XH, Yan Y, et al. Preliminary studies on peripheral nerve regeneration using a new polyurethane conduit. J Bioact Compat Pol. 2007 ; 22: 143-159 (Pubitemid 46446203)
8. Pego AP, Siebum B, Luyn V, et al. Preparation of degradable porous structures based on 1,3-trimethylene carbonate and d,l-lactide (co)polymers for heart tissue engineering. Tissue Eng. 2003 ; 9: 981-994 (Pubitemid 37296829)
9. Ozawa T, Mickle DAG, Weisel RD, et al. Optimal biomaterial for creation of autologous cardiac grafts. Circulation. 2002 ; 106: I176 - I182
10. Guarino V, Alvarez-Perez M, Cirillo V, et al. HMSC interaction with PCL and PCL/gelatin platforms: a comparative study on films and electrospun membranes. J Bioact Compat Polym. 2011 ; 26 (2). 144-160
11. Bruggeman JP, de Bruin B-J, Bettinger CJ, et al. Biodegradable poly(polyol sebacate) polymers. Biomaterials. 2008 ; 29: 4726-4735
12. Marchese P, Celli A, Fiorini M. Influence of the activity of transesterification catalysts on the phase behavior of PC-PET blends. Macromol Chem and Physic. 2002 ; 203: 695-704
13. Soccio M, Lotti N, Finelli L, et al. Influence of transesterification reactions on the miscibility and thermal properties of poly(butylene/diethylene succinate) copolymers. Eur Polym J. 2008 ; 44: 1722-1732
14. Soccio M, Lotti N, Finelli L, et al. Miscibility of biodegradable poly(propylene succinate)/poly(propylene adipate) blends: effect of the transesterification reactions. Eur Polym J. 2009 ; 45: 3236-3248
15. Fujimaki T. Processability and properties of aliphatic polyesters, "Bionolle," synthesized by polycondensation reaction. Polym Degrad Stabil. 1998 ; 59: 209-214 (Pubitemid 128389714)
16. Xu J, Guo B-H. Poly(butylene succinate) and its copolymers: research, development and industrialization. Biotechno J. 2010 ; 5: 1149-1163
17. Li H, Chang J, Cao A, et al. In vitro evaluation of biodegradable poly(butylene succinate) as a novel biomaterial. Macromol Biosci. 2005 ; 5: 433-440 (Pubitemid 40813980)
18. Oliviera JT, Correlo VM, Sol PC. Assessment of the suitability of chitosan/polybutylene succinate scaffolds seeded with mouse mesenchymal progenitor cells for a cartilage tissue engineering approach. Tissue Eng Pt A. 2008 ; 14: 1651-1661
19. Huang Z-M, Zhang YZ, Ramakrishna S, et al. Electrospinning and mechanical characterization of gelatin nanofibers. Polymer. 2004 ; 45: 5361-5368 (Pubitemid 38834116)
20. Foroni L, Dirani G, Gualandi C, et al. Paraffin embedding allows effective analysis of proliferation, survival and immunophenotyping of cells cultured on poly(l-lactic acid) electrospun nanofiber scaffolds. Tissue Eng Pt C. 2010 ; 16: 751-760
21. Chen MS, Chang SJ, Chang RS, et al. Copolyesters. I. Sequence distribution of poly(butylene terephthalate-co-adipate) copolyesters determined by 400 MHz NMR. J Appl Polym Sci. 1990 ; 40: 1053-1057 (Pubitemid 20717473)
22. Jiang G, Wu H, Guo S. Reinforcement of adhesion and development of morphology at polymer-polymer interface via reactive compatibilization: a review. Polym Eng Sci. 2010 ; 50: 2273-2286
23. Khonakdar HA, Golriz M, Jafari SH, et al. Correlation of sequence block lengths and degree of randomness with melt rheological properties in PET/PEN blends. Macromol Mater Eng. 2009 ; 294: 272-280
24. Marchese P, Celli A, Fiorini M. Relationships between the molecular architecture, crystallization capacity, and miscibility in poly(butylene terephthalate)/polycarbonate blends. J Polym Sci Pol Phys. 2004 ; 42: 2821-2832
25. Puppi D, Piras AM, Detta N, et al. Poly(vinyl alcohol)-based electrospun meshes as potential candidate scaffolds in regenerative medicine. J Bioact Compat Pol. 2011 ; 26: 20-34
26. Kumbar SG, James R, Nukavarapu SP, et al. Electrospun nanofiber scaffolds: engineering soft tissues. Biomedical Materials. 2008 ; 3: 034002
27. Blackwood KA, McKean R, Canton I, et al. Development of biodegradable electrospun scaffolds for dermal replacement. Biomaterials. 2008 ; 29: 3091-3104
28. Zahedi P, Rezaeian I, Ranaei-Siadat S-O, et al. A review on wound dressings with an emphasis on electrospun nanofibrous polymeric bandages. Polym Advan Technol. 2010 ; 21: 77-95
29. Chew SY, Mi R, Hoke A, et al. Aligned protein-polymer composite fibers enhance nerve regeneration: a potential tissue-engineering platform. Adv Funct Mater. 2007 ; 17: 1288-1296 (Pubitemid 46847643)
30. Koh HS, Yong T, Chan CK, et al. Enhancement of neurite outgrowth using nano-structured scaffolds coupled with laminin. Biomaterials. 2008 ; 29: 3574-3582
31. Inoguchi H, Kwon IK, Inoue E, et al. Mechanical responses of a compliant electrospun poly(l-lactide-co-e-caprolactone) small-diameter vascular graft. Biomaterials. 2006 ; 27: 1470-1478 (Pubitemid 41739573)
32. Stitzel J, Lee SJ, Komura M, et al. Controlled fabrication of a biological vascular substitute. Biomaterials. 2006 ; 27: 1088-1094 (Pubitemid 41566702)
33. Lu H, Chen W-J, Xing Y, et al. Design and preparation of an electrospun biomaterial surgical patch. J Bioact Compat Pol. 2009 ; 24: 158-168
34. Shin M, Ishii O, Sueda T, et al. Contractile cardiac grafts using a novel nanofibrous mesh. Biomaterials. 2004 ; 25: 3717-3723 (Pubitemid 38327060)
35. Zong X, Bien H, Chung CY, et al. Electrospun fine-textured scaffolds for heart tissue constructs. Biomaterials. 2005 ; 26: 5330-5338 (Pubitemid 40462348)
36. Deitzel JM, Kleinmeyer JD, Hirvonen JK, et al. Controlled deposition of electrospun poly(ethylene oxide) fibers. Polymer. 2001 ; 42: 8163-8170 (Pubitemid 32566422)
37. Focarete ML, Gualandi C, Scandola M, et al. Electrospun scaffolds of a polyhydroxyalkanoate consisting of α-hydroxylpentadecanoate repeat units: fabrication and in vitro biocompatibility studies. J Biomat Sci-Polym E. 2010 ; 21: 1283-1296
38. Zhong X, Ran S, Fang D, et al. Control of structure, morphology and property in electrospun poly(glycolide-co-lactide) non-woven membranes via post-draw treatments. Polymer. 2003 ; 44: 4959-4967 (Pubitemid 36899586)
39. Li S. Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acid. J Biomed Mater Res. 1999 ; 48: 342-353 (Pubitemid 29242707)
40. Vert M, Garreau H, Maudit J, et al. Complexity of the hydrolytic degradation of aliphatic polyesters. Die Angew Makrom Chem. 1997 ; 247: 239-253
41. Von Burkersroda F, Schedl L, Gopferich A. Why degradable polymers undergo surface erosion or bulk erosion. Biomaterials. 2002 ; 23: 4221-4231 (Pubitemid 34814991)
42. Gopferich A. Mechanism of polymer degradation and erosion. Biomaterials. 1996 ; 17: 103-114
43. Garreau H, Grizzi I, Vert M, et al. Hydrolytic degradation of devices based on poly(dl-lactic acid) size dependence. Biomaterials. 1995 ; 16: 305-311
44. Han X, Pan J. Polymer chain scission, oligomer production and diffusion-a two scale model for degradation of bioresorbable polyesters. Acta Biomater. 2011 ; 7: 538-547
45. Lu L, Garcia CA, Mikos AG. In vitro degradation of thin poly(dl-lactic-co-glycolic acid) films. J Biomed Mater Res. 1999 ; 46: 236-244
46. Bosworth LA, Downes S. Physicochemical characterisation of degrading polycaprolactone scaffolds. Polym Degrad Stabil. 2010 ; 95: 2269-2276
47. Cui W, Li X, Yu G, et al. Investigation of drug release and matrix degradation of electrospun poly(d,l-lactide) fibers with paracetanol inoculation. Biomacromolecules. 2006 ; 7: 1623-1629 (Pubitemid 43811221)
48. Zong X, Ran S, Kim K-S, et al. Structure and morphology changes during in vitro degradation of electrospun poly(glycolide-co-lactide) nanofiber membrane. Biomacromolecules. 2003 ; 4: 416-423 (Pubitemid 36527115)
49. Hescheler J, Meyer R, Plant S, et al. Morphological, biochemical, and electrophysiological characterization of a clonal cell (H9c2) line from rat heart. Circ Res. 1991 ; 69: 1476-1486