State-of-the-knowledge on TWIP steel

Materials Science and Technology

Volumn 28, Issue 5, 2012, Pages 513-527

  De Cooman, B C ^a   Kwon, O ^b   Chin, K G ^b  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b POSCO   (South Korea)

Author keywords

Automotive steel; Stacking fault energy; Twinning induced plasticity

Indexed keywords

AUTOMOTIVE APPLICATIONS; AUTOMOTIVE STEELS; AUTOMOTIVE VEHICLE; CONVENTIONAL MOTORS; HIGH STRENGTH; IN-VEHICLE; LIGHTWEIGHTING; PHYSICAL METALLURGY; PRESS FORMING; SHEET STEEL; STACKING FAULT ENERGIES; STEEL COMPONENTS; STRUCTURAL STEELS; TWINNING INDUCED PLASTICITY STEELS; TWIP STEEL;

BUILDING MATERIALS; GAS EMISSIONS; GREENHOUSE GASES; MANGANESE; MECHANICAL PROPERTIES; STAINLESS STEEL; STRAIN HARDENING;

HIGH STRENGTH STEEL;

EID: 84860455343     PISSN: 02670836     EISSN: 17432847     Source Type: Journal    
DOI: 10.1179/1743284711Y.0000000095     Document Type: Review

References (88)

1. O. Grassel, L. Kruger, G. Frommeyer and L. Meyer: Int. J. Plast., 2000, 16, 1391.
2. O. Grassel, G. Frommeyer, C. Derder and H. Hofman: J. Phys. IV, 1997, 60, 383.
3. G. Frommeyer, U. Brux and P.Neumann: ISIJ Int., 2003, 43, (3), 438.
4. A. Prakash, T. Hochrainer, E. Reisacher and H. Riedel: Steel Res. Int., 2008, 79, (8), 645.
5. H. Schuman: Neue Hutte, 1971, 17, 605.
6. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, 28, 99.
7. T. W. Kim: Mater. Sci. Eng. A, 1993, A160, 13.
8. Y. G. Kim, T. W. Kim and S. B. Hong: 26th INternational Symposium on Automotive Technology and Automation (ISATA), Croydon, September 1993, 269.
9. S. Allain: Caractérisation et modélisation thermo-mécanique multiéchelle des mécanismes de déformation et d'écrouissage d'aciers austenitiques a haute teneur en manganèse. PhD thesis, INPL, Nancy, France, 2004.
10. S. K. Kim, J. Choi, S. C. Kang, I. R. Shon and K. G. Chin: POSCO Techn. Rep., 2006, 10, (1), 106.
11. K. G. Chin: Proc. Int. Conf. on 'Materials in car body engineering', Bad Neuheim, Germany, May 2010, Automotive-Circle, 12.
12. R. van Tol, L. Zhao and J. Sietsma: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper A-30.
13. K. A. Ofei, L. Zhao and J. Sietsma: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper A-18.
14. M. Cornelissen, F. Menguelti, B. Berhout and B. van Veldhuizen: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper C-5.
15. B. Springub and M. Otto: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper F-6.
16. T. Furuhara, N. Kimura and T. Maki: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper A-14.
17. J. Kim, I. Choi and Y.-K. Lee: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper B-29.
18. Y. Z. Zhano, G. Liang and Y. Jiang: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper A-30.
19. V. T. Witusiewicz, F. Sommer and E. J. Mittemeijer: J. Phase Equilib. Diff., 2004, 25, (4), 346.
20. J. K. Jung, O. Y. Lee, Y. K. Park, D. E. Kim, K. G. Jin, S. K. Kim and K. H. Song: J. Kor. Inst. Met. Mater., 46, (10), 627.
21. S. Lee, J. Kim, S.-J. Lee and B. C. de Cooman: Scr. Mater., 2011, 65, 528-531.
22. B. W. Oh, S. J. Cho, Y. G. Kim, Y. P. Kim, W. S. Kim and S. H. Hong: Mater. Sci. Eng. A, 1995, A197, 147.
23. S. Allain, J. P. Chateau, O. Bouaziz, S. Migot and N. Guelton: Mater. Sci. Eng. A, 2004, A387-389, 306.
24. X. Tian, H. Li and Y. Zhang: J. Mater. Sci., 2008, 43, (18), 6214.
25. X. Tian and Y. Zhang: Mater. Sci. Eng. A, 2009, A516, 73.
26. J. Kim, S.-J. Lee and B. C. de Cooman: Scr. Mater., 2011, 65, 363.
27. J. Kim and B. C. de Cooman:Metall. Mater. Trans. A, 2011, 42A, 932.
28. A. Yakubtsov, A. Ariapour and D. D. Perovic: Acta Mater., 1999, 47, 1271.
29. S. Alain, J.-P. Chateau, O. Bouaziz, S. Migot and N. Guelton: Mater. Sci. Eng. A, 2004, A387-389, 158.
30. A. Dumay, J.-P. Chateau, S. Allain, S. Migot and O. Bouaziz: Mater. Sci. Eng. A, 2008, A483-484, 184-187.
31. J.-E. Jin and Y.-K. Lee: Mater. Sci. Eng. A, 2009, A527, 157-161.
32. B. X. Huang, X. D. Wang, L. Wang and Y. H. Rong: Metall. Mater. Trans. A, 2008, 39A, 717.
33. X. Tian, H. Li and Y. Zhang: J. Mater. Sci., 2008, 43, 6214-6222.
34. X. D. Wang, B. X. Huang and Y. H. Rong: Philos. Mag. Lett., 2008, 88, (11), 845-851.
35. H. Idrissi, L. Ryelt, M. Veron, D. Schryvers and P. J. Jacques: Scr. Mater., 2009, 60, 941-944.
36. A. Saaed-Akbari, J. Imlau, U. Prahl and W. Bleck: Metall. Mater. Trans. A, 2009, 40A, 3076.
37. G. Dini, R. Ueji, A. Najafizadeh and S. M. Monir-Vaghefi: Mater. Sci. Eng. A, 2010, A527, 2759.
38. O. Bouaziz, H. Zurob, B. Chebab, J. D. Embury, S. Allain and M. Huang: Mater. Sci. Technol., 2011, 27, 707.
39. K.-G Chin: unpublished results, POSCO Technical Research Laboratories, Gwangyang, Korea, 2010.
40. F. Barlat: unpublished results, Graduate Institute of Ferrous Technology, POSTECH, Pohan, Korea, 2010.
41. O. Bouaziz and N. Geulton: Mater. Sci. Eng. A, 2001, A319-321, 246.
42. S. Allain, J.-P. Chateau and O. Bouaziz: Mater. Sci. Eng. A, 2004, A387-389, 143.
43. S. Allain, J.-P. Chateau, D. Dahmoun and O. Bouaziz: Mater. Sci. Eng. A, 2004, A387-389, 272.
44. U. F. Kocks and H. Mecking: Acta Metall., 1981, 32, 1865.
45. M. N. Shiekhelsouk, V. Favier, K. Inal and M. Cherkaoui: Int. J. Plast. 2009, 25, 105.
46. J. Kim: unpublished results, Graduate Institute of Ferrous Technology, POSTECH, Pohan, Korea.
47. Y. Estrin and L. P. Kubin: Acta Metall., 1986, 34, (12), 2455.
48. L. Xu and F. Barlat: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper E-1.
49. J. G. Sevillano: Scr. Mater., 2009, 60, 336.
50. O. Bouaziz, S. Allain and C. Scott: Scr. Mater., 2008, 58, 484.
51. J. P. Hirth and J. Lothe: 'Theory of dislocations', 2nd edn; 1982, New York, Wiley-Interscience.
52. J. Talonen and H. Hanninen: Acta Mater., 2007, 55, 6108.
53. I. Gutierrez-Urrutia, S. Zaefferer and D. Raabe: Mater. Sci. Eng. A, 2010, A527, 3552.
54. T. S. Byun: Acta Mater., 2003, 51, 3063.
55. M. A. Meyers, O. Vohringer and V. A. Lubarda: Acta Mater., 2001, 49, 4025.
56. J. A. Venables: Phil. Mag., 1961, 6, 379.
57. J. A. Venables: Phil. Mag., 1974, 30, 1165.
58. J. A. Venables: J. Phys. Chem. Solids, 1964, 25, 693.
59. L. Bracke, L. Kestens and J. Penning: Acta Mater., 2009, 57, 1512.
60. S. Mahajan and G. Y. Chin: Acta Metall., 1973, 21, 1353.
61. K. P. D. Lagerlof, J. Castaing, P. Pirouz and A. H. Heuer: Phil. Mag. A, 2002, 82A, (15), 2841.
62. M. Niewczas and G. Saada: Phil. Mag. A, 2002, 2A, (1), 167.
63. S. Miura, J. Takamura and N. Narita: Proc. Int. Conf. on 'Strength of metals and alloys', Tokyo, Japan, September 1976, Japan Institute of Metals, 681.
64. S. Muira, J. I. Takamura and N. Narita: Trans. J. Inst. Met. Suppl., 1968, 9, S555.
65. J. F. M. Vergnol and J. R. Grilhe: J. Phys., 1984, 45, 1479.
66. I. Karaman, H. Sehitoglu, K. Gall, Y. I. Chumlyakov and H. J. Maier: Acta Mater., 2000, 48, 1345.
67. L. Chen, J.-K. Kim, S.-K. Kim, G.-S. Kim, K.-G. Chin and B. C. de Cooman: Steel Res. Int., 2010, 81, (7), 552.
68. R. Ueji, K. Harada, N. Tsuchida and K. Kunishige: Mater. Sci. Forum, 2007, 561-565, 107-110.
69. P. Sahu, S. Curtze, A. Das, B. Mahato, V.-T. Kuokkala and S. Gosh Chowdhury: Scr. Mater., 2010, 62, 5-8.
70. L. Chen, H.-S. Kim, S.-K. Kim and B. C. de Cooman: ISIJ Int., 2007, 47, (12), 1804-1812.
71. J.-K. Kim, L. Chen, H.-S. Kim, S.-K. Kim, Y. Estrin and B. C. de Cooman: Metall. Mater. Trans. A, 2009, 40, (13), 3147-3158 .
72. P. D. Zavattieri, V. Savic, L. G. Hector jr., J. R. Fekete, W. Tong and Y. Xuan: Int. J. Plast., 2009, 25, 2298.
73. W. A. Curtin, D. L. Olmsted and L. G. Hector, Jr: Nature Mater., 2006, 5, 875.
74. J. von Appen and R. Dronskowski: Steel Res. Int. Spec. Iss. Steel ab initio, 2011, 82, 101-107.
75. J. von Appen and R. Dronskowski: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper E-5.
76. Y. Kim, N. Kang, Y. Park, G. Kim, S. Kim and K. Cho: J. Kor. Inst. Met. Mater., 2008, 46, (12), 780-787.
77. J. K. Jung, O. Y. Lee, Y. K. Park, D. E. Kim and K. G. Jin: Kor. J. Mater. Res., 2008, 18, (7), 394-399.
78. K. H. So, J. S. Kim, Y. S. Chun, K.-T. Park, Y.-K. Lee and C. S. Lee: ISIJ Int., 2009, 49, 1952.
79. T. Niendorf, C. Lotze, D. Canadinc, A. Frehn and H. J. Maier: Mater. Sci. Eng. A, 2009, A499, 518-524.
80. A. S. Hamada, L. P. Karjalainen and J. Puustinen: Mater. Sci. Eng. A, 2009, A517, 68-77.
81. D. C. Saha, C. Y. Choi, S. Han, K.-G. Chin, I. Choi and Y.-D. Park: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper F-8.
82. R. Ueji, N. Tsuchida, H. Fujii, A. Kondo and K. Kunishige: J. Jpn Inst. Met., 2007, 71, (9), 815-821.
83. R. Ueji, K. Harada, A. Takemura and K. Kunishige: Mater. Sci. Forum, 2008, 584-586, 673.
84. O. Bouaziz, C. P. Scott and G. Petitgr: Scr. Mater., 2009, 69, 714-716.
85. O. Kwon: Proc. 1st Int. Conf. on 'HighMn steel', Seoul, Korea,May 2011, The Korean Institute of Metals and Materials, Paper P-4.
86. Y. E. Lee and D. S. Min: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper F-3.
87. L. Cho and B. C. de Cooman: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper C-1.
88. Y. Kim, J. Lee, K.-S. Shin, S.-H. Jeon and K-G. Chin: Proc. 1st Int. Conf. on 'High Mn steel', Seoul, Korea, May 2011, The Korean Institute of Metals and Materials, Paper C-2.